Brodit 834907 Datasheet

Category
Holders
Type
Datasheet
27 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 834907
834907 ProClip
Console mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288349077
Item no 834907 fits:
GMC Acadia 13-15 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all the instructions and look at the pictures before attaching the ProClip.
1. Peel off the adhesive tape cover on the ProClip. Press the angled edge on the upper part of the ProClip into
the gap between the console sidewall and top panel on the console.
2. Flip/Press the ProCLip downward so the angled lower edge hooks under the lower section of the console
sidewall and into the seem on the under side.
3. Place your finger underneath the lower part och the ProClip and press up on the ProClip for best possible
attachment of the adhesive tape.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 834907 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI