Altronix SMP10PMC24X Datasheet

Altronix
Brand
Altronix
Model
SMP10PMC24X
Category
Power extensions
Type
Datasheet
• This unit will convert a 115VAC / 60Hz input, into a regulated 24VDC
output at up to 10 amp continuous supply current (see specifications).
• 24VDC output.
• 10 amp supply current.
• Input 115VAC @ 2.7 amp.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form "C" contacts).
• Power on-off switch.
• AC input and DC output LED indicators.
• Power supply, enclosure, cam lock & battery leads.
• Enclosure:
- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2)
12VDC/12AH batteries.
SMP10PMC24X
Supervised Power Supply/Charger
Rev. DSSMP10PMC24X - A13F
Overview
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Enclosure Dimensions
15.5”H x 12 ”W x 4.5”D
.875"
1"
1.3"
9.97"
13.53"
6.625"
2.25"
3.68"
4.56"
1.22"
1.22"
3.5"
1"
13.25"
2"
1.22"
12"
15.5"
4.5"
2.25"
3.68"
4.56"
1.22"
1.25"
2.2"
1"
  • Page 1 1

Altronix SMP10PMC24X Datasheet

Altronix
Brand
Altronix
Model
SMP10PMC24X
Category
Power extensions
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents