Altronix AL400ULXPD16 Datasheet

Category
Power extensions
Type
Datasheet

This manual is also suitable for

Altronix AL400ULXPD16CB is a multi-output power supply/charger that converts 115VAC/60Hz input into sixteen (16) Class 2 Rated 12VDC or 24VDC power limited outputs. It features selectable outputs of 12VDC @ 4 amp or 24VDC @ 3 amp supply current, and its outputs are protected against short circuits and thermal overloads. Additionally, it has a built-in charger for sealed lead acid or gel type batteries, with a maximum charge current of .7 amp and automatic switch over to standby battery when AC fails.

Altronix AL400ULXPD16CB is a multi-output power supply/charger that converts 115VAC/60Hz input into sixteen (16) Class 2 Rated 12VDC or 24VDC power limited outputs. It features selectable outputs of 12VDC @ 4 amp or 24VDC @ 3 amp supply current, and its outputs are protected against short circuits and thermal overloads. Additionally, it has a built-in charger for sealed lead acid or gel type batteries, with a maximum charge current of .7 amp and automatic switch over to standby battery when AC fails.

AL400ULXPD16(R), AL400ULXPD16CB(R)
Multi-Output Power Supply/Chargers
Rev. DSAL400ULXPD16 - B10F
Overview
Specifications
AL400ULXPD16
Fuses are rated @ 3.5 amp/250V.
Grey enclosure.
AL400ULXPD16R
Red enclosure.
AL400ULXPD16CB
PTCs are rated @ 2.5 amp.
Grey enclosure.
AL400ULXPD16CBR
Red enclosure.
These multi-agency approved multi-output power supply/chargers convert a
115VAC/60Hz input into sixteen (16) Class 2 Rated 12VDC or 24VDC
power limited outputs.
12VDC or 24VDC selectable outputs.
12VDC @ 4 amp or 24VDC @ 3 amp supply current.
Class 2 Rated power limited outputs.
Sixteen (16) protected outputs.
Input 115VAC / 60Hz, 1.45 amp.
Input fuse rated @ 3.5 amp/250V.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid
or gel type batteries.
Maximum charge current .7 amp.
Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
AC fail supervision (form "C" contacts).
Low battery supervision (form "C" contacts).
Battery presence supervision (form “C” contacts).
AC input and DC output LED indicators.
Enclosure:
- Combination knockouts are 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH batteries.
Product weight:
- AL400ULXPD16: 10.3 lbs.
- AL400ULXPD16CB: 10.3 lbs.
Shipping weight:
- AL400ULXPD16: 11.6 lbs.
- AL400ULXPD16CB: 11.7 lbs.
Agency Approvals
CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.
UL 294 UL Listed for Access Control
System Units.
UL 603 UL Listed Standard for Power
Supplies for Use with Burglar-
Alarm Systems.
UL 1069 UL Listed Hospital Signaling and
Nurse Call Equipment.
UL 1481 UL Listed Standard for Safety for
Fire Protective Signaling Systems.
.875"
1"
1.3"
9.97"
13.53"
6.625"
2.25"
3.68"
4.56"
1.22"
1.22"
3.5"
1"
13.25"
2"
1.22"
12"
15.5"
4.5"
2.25"
3.68"
4.56"
1.22"
1.25"
2.2"
1"
Enclosure Dimensions
15.5"H x 12"W x 4.5"D
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
  • Page 1 1
  • Page 2 2

Altronix AL400ULXPD16 Datasheet

Category
Power extensions
Type
Datasheet
This manual is also suitable for

Altronix AL400ULXPD16CB is a multi-output power supply/charger that converts 115VAC/60Hz input into sixteen (16) Class 2 Rated 12VDC or 24VDC power limited outputs. It features selectable outputs of 12VDC @ 4 amp or 24VDC @ 3 amp supply current, and its outputs are protected against short circuits and thermal overloads. Additionally, it has a built-in charger for sealed lead acid or gel type batteries, with a maximum charge current of .7 amp and automatic switch over to standby battery when AC fails.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI