Atdec SD-SA-DW-BK Datasheet

Atdec
Brand
Atdec
Model
SD-SA-DW-BK
Category
Mounting kits
Type
Datasheet

This manual is also suitable for

A
General Features
A
Component Checklist
Technical Specifications
SPACEDEC ACROBAT
SWING ARM WALL
As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with the
international VESA standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 24.10.07
Display Compatibility:
Spacedec Acrobat is compatible with most LCD displays that use the VESA international mounting standard.
Please refer to the VESA Compliance List on the Atdec website to view all compatible LCD models (atdec.com)
Display Weight Compatibility:
3kg to 9kg (6.6lbs to 19.8lbs)
Wall Mounting Options:
Suits both brick/concrete walls and drywalls.
Display Mounting Options:
Suits 75mm x 75mm (3” x 3”) and 100mm x 100mm (4” x 4”) mounting hole patterns
Cable Management:
Cable Wrap Manager Clip, Cable Clips and Cable Wrap (included in package)
Colours:
Polished Aluminum, Silver or Black
Warranty:
5 years limited
4
3
2
1
Arm swings 180° around wall mount
Up to 460mm (18”) height adjustment
Pivot head pans 85°
±40° tilt, ±40° pan
Portrait/Landscape rotation
1
2
3
4
5
5
NOTE: The following information is based on a Spacedec Acrobat Swing Arm Wall with the
standard 350mm (13
3
/
4
”) arm set at the 6kg (13lbs) gas strut setting.
75mm x 75mm (3” x 3”) mounting hole pattern 100mm x 100mm (4” x 4”) mounting hole pattern
4x10mm
Screws
75mm
(3”)
75mm (3”)
Extension Clip
4x12mm or
4x16mm Screws
100mm
(4”)
100mm (4”)
Wall Mounting
D
Display Mounting Options
E
Suits 75mm x 75mm (3” x 3”) and 100mm x 100mm (4” x 4”) mounting hole patterns.
Cable Management
F
All Spacedec Acrobat Swing Arm Walls are supplied with 650mm (25
1
/
2
”) of Ø16mm (
5
/
8
”) black Cable Wrap
and two Cable Clips.
Display
Display
Wall Mount
6.5mm
(
1
/
4”)
50mm
(2”)
88mm
(3
7
/
16”)
48.5mm
(1
7
/
8”)
73mm
(2
7
/
8”)
84mm
(3
5
/
16”)
58mm
(2
5
/
16”)
20mm
(
13
/
16”)
Cable Clips
(x2)
Cable Wrap
Overall Dimensions
B
Range of Movement
C
350mm (13
3
/
4”)
375mm (14
3
/
4”)
50mm (2”)
arm at minimum elevation
arm at maximum elevation
80°
30°
Height Range
460mm
(18”)
  • Page 1 1
  • Page 2 2

Atdec SD-SA-DW-BK Datasheet

Atdec
Brand
Atdec
Model
SD-SA-DW-BK
Category
Mounting kits
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents