General Features
A
Component Checklist
Technical Specifications
SPACEDEC ACROBAT
WALL ARTICULATED ARM
As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with the
international VESA standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 24.10.07
Display Compatibility:
Spacedec Acrobat is compatible with most LCD displays that use the VESA international mounting standard.
Please refer to the VESA Compliance List on the Atdec website to view all compatible LCD models (atdec.com)
Display Weight Compatibility:
3kg to 9kg (6.6lbs to 19.8lbs)
Wall Mounting Options:
Suits both brick/concrete walls and drywalls.
Display Mounting Options:
Suits 75mm x 75mm (3” x 3”) and 100mm x 100mm (4” x 4”) mounting hole patterns
Cable Management:
Cable Clips and Cable Wrap (included in package)
Colours:
Polished Aluminum, Silver or Black.
Warranty:
5 years limited
Arm swings 180° around wall mount
360° rotation
Up to 460mm (18”) height adjustment
Pivot head pans 85°
±40° tilt, ±40° pan
Portrait/Landscape rotation
1
2
3
4
5
6
Cable Management
F
All Spacedec Acrobat Wall Articulated Arms are supplied with 1000mm (39
3
/8”) of Ø16mm (
5
/8”) black Cable
Wrap.
Wall Mount
D
NOTE: The following information is based on a Spacedec Acrobat Articulated Wall Arm with
the standard 350mm (13
3
/
4
”) arm set at the 6kg (13lbs) gas strut setting.
75mm x 75mm (3” x 3”) mounting hole pattern 100mm x 100mm (4” x 4”) mounting hole pattern
4x10mm
Screws
75mm
(3”)
75mm (3”)
4x12mm or
4x16mm Screws
100mm
(4”)
Display Mounting Options
E
Suits 75mm x 75mm (3” x 3”) and 100mm x 100mm (4” x 4”) mounting hole patterns.
Display
Display
100mm (4”)
5
4
3
2
6
1
Wall Mount
6.5mm
(
1
/
4”)
50mm
(2”)
88mm
(3
7
/
16”)
48.5mm
(1
7
/
8”)
73mm
(2
7
/
8”)
84mm
(3
5
/
16”)
58mm
(2
5
/
16”)
20mm
(
13
/
16”)
Cable Clips (x3)
Display at highest
point