Technical Specification
SD-FS-T
General Features
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 24.08.11
C
Dimension
Spacedec Freestanding Triple
1
2
Display Weight Compatibility:
Each Mounting Head supports a maximum weight of 8kg (17 / lbs)
Horizontal adjustment
±20° Pan/Tilt adjustment
1
3
4
2
75mm
100mm
75mm
100mm
VESA MOUNTING OPTIONS
1418mm
(55.81”)
460mm
(18.11”)
307mm
(12.09”)
318mm
(12.51”)
34mm
(1.34”)
340mm
(13.38”)
483mm
(19”)
170mm
(6.68”)
51mm
(2”)
Note: This product supports
displays with a total maximum
height (from edge to edge) of
up to 450 (17.72”).
Note: This product supports
displays with a total maximum
width (from edge to edge) of
up to 635mm (25”).
Vertical height adjustment
360°Portrait/Landscape adjustment
1
2
3
4
Display Compatibility:
This product supports up to 3 Flat Panel Displays with a physical
dimensions of up to 635mm (25”) wide and 450mm (71.72”)
high and VESA mounting hole configurations of 75mm x 75mm
or 100mm x 100mm.
Cable Management:
Cable Slot and Cable Clips (included in package)
Colour:
Colour is: Charcoal Grey
Warranty:
10 years
limited
Mounting Options:
A. Freestanding
B. Freestanding with optional bolt down
C. Bolt Through
Bolt Through
63mm (2.48”)
Desk Max.
Thickness
MOUNTING OPTIONS:
37mm (1.46”)
Desk Max.
Thickness
Freestanding (with optional bolt down)
Spacedec
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Atdec VF-AT-W/TAA Specification
-
-
-
-
-
Atdec SD-SA-DK-DB-P Installation guide
-
-
Atdec SD-SA-DK-P Specification
-
Atdec SD-AT-DK-P Specification
-
