2. Home
  3. Lighting
  4. Stroboscopes & disco lights
  5. Acclaim Lighting
  6. Color Ray MR

Acclaim Lighting Color Ray MR Operation Instructions

  • Hello! I am an AI chatbot trained to assist you with the Acclaim Lighting Color Ray MR Operation Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DESCRIPTIONS
SPECIFICATIONS
The ColorRay MR is a 3 watt high power LED
lighting fixture. It is available in RGBA and WW
verison for you option. The beam angle of lens
is selectable from 20, 40 and 20x40 degree.
The ColorRay MR can be driven by ColorRay
MR Driver from us.
Color Ray MR
Operation Instructions
0.1kg
WEIGHT
50mm(Dia) x 45mm(Depth)
DIMENSIONS
-10 degC to +50 degC
OPERATING TEMPERATURE
CE certifiedLISTING
Luxeon Rebel x4
LED TYPE
Die cast aluminum with powder silver
HOUSING
20, 40 and 20X40 Degree FWHM
BEAM ANGLE
50,000 hours under normal operating conditions
SOURCE LIFE
4.3 million (32 bit)
COLOR RANGE
Cat.5 Cable with RJ45 connetorCONNECTION
POWER CONSUMPTION
8.8W Max at full intensity(RGBA or WW)
ColorRay MR DMX Driver
DRIVER
STORAGE TEMERATURE
-20 degC to +70 degC
4 high power Rebel LEDs(Red,Green, Blue and Amber or WW)
LIGHT SOURCE
350~750mA constant current per cahnnel
POWER REQUIREMENT
FEATURES
Robust construction suitable for outdoor application
Very long operation life in excess of 50,000 hours
Rich color changing effect
Low energy consumption 5W
Fully DMX controlled
ColorRay MR Driver build-in 7 preset programs with 8 selectable fade time & chasing speed
Page 1
PHYSICAL DIMENSIONS & ORDER INFORMAFIONS
SYSTEM CONNECTION SCHEMATIC DIAGRAM
DescriptionPart Number
CRMR-8W-WW-20 MR-16 WW Luxoen Rebelx4 LED
CRMR-8W-RGBA-20 MR-16 RGBA Luxoen Rebelx4 LED
CRMR-8W-WW-40 MR-16 WW Luxoen Rebelx4 LED
CRMR-8W-RGBA-40 MR-16 RGBA Luxoen Rebelx4 LED
CRMR-8W-WW-2040 MR-16 WW Luxoen Rebelx4 LED
CRMR-8W-RGBA-2040 MR-16 RGBA Luxoen Rebelx4 LED
For more information about ColorRay MR Driver, please refer to the following contents in this manual.
Note:
ColorRay MR Driver
(Sold Separately)
Page 2
www.AcclaimLighting.com
ABOUT ColorRay MR Driver
1.2Stand Alone Mode
The Stand Alone Mode is engaged in by flipping the dip-switch 10 to the "OFF" position. And this mode
includes sub-modes with many functions, such as fade time, chasing speed, built-in programs.
1 2 3 4 5 6 7 8 9 10
ON
RS
ON
OFF
1,2,4
3,4
1,3,4
2,3,4
1,2,3,4
1,2,3,4,5,6,7,8,9
1
2
1,2
3
1,3
2,3
1,2,3
4
1,4
2,4
DMX ADDRESS (SLAVE)
SWITCHES ON SWITCHES ON
(Dip Switch 10 = on)
START
CH#
START
CH#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
.
.
511
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1 2 3 4 5 6 7 8 9 10
ON
RS
DMX is short for Digital Multiplex. This is a universal binary language used as a form of communication
between intelligent fixtures. Each dip switch represents a binary value.
1.Operation Guide
A DMX value(address) is set by combining the different dipswitches that will add up to the value you wish to
achieve, for example:
Setting DMX address for 21.
Flip switches1,3,&5 to the
"ON" position
Setting DMX address for 201.
Flip switches1,4,7,& 8 to the
"ON" position
Dipswitches# Value
1=1
3=4
5=16
=21
Dipswitches# Value
1=1
4=8
7=64
8=128
=201
In this mode, the dip-switch 10 is flipped to the "ON" position. And this switch sometimes used to activate
some fixture special functions.
Dip Switch 1 address equals 1
Dip Switch 2 address equals 2
Dip Switch 3 address equals 4
Dip Switch 4 address equals 8
Dip Switch 5 address equals 16
Dip Switch 6 address equals 32
Dip Switch 7 address equals 64
Dip Switch 8 address equals 128
Dip Switch 9 address equals 256
1.1 DMX Control Mode (DMX Addressing)
000
100
010
110
001
101
011
111
0%
100%
1
2
3
ON
FADE TIME
"0" = "OFF" position
"1" = "ON" position.
(Dip Switches 10 = off)
1) The Stand Alone Mode enables.
2) Thus, flip the dip-switch 1,2 & 3(12-way Function Dip Switch) to set a desired level for fade time.
1.2.1 Setting fade time
14%
28%
43%
57%
71%
86%
11 12
11 12
Page 3
www.AcclaimLighting.com
1) The Stand Alone Mode enables;
2) Thus, flip the dip-switch 4,5 & 6(12-way Function Dip Switch)to adjust a desired level for chasing speed.
4
5
6
ON
SPEED
000
100
010
110
001
101
011
111
0.1S
0.2S
0.5S
1S
5S
10S
20S
30S
"0" = "OFF" position
"1" = "ON" position.
(Dip Switches 10 = off)
1.2.2 Adjusting chase speed
1) The Stand Alone mode enables;
2) Thus, flip the dip-switch 7,8 & 9 (12-way Function Dip Switch) to select the desired program.
1.2.3 Selecting Built-in programs
000
100
010
1
2
3
7 8
9
ON
PROGRAM
(Dip Switches 10 = off)
110
001
101
011
111
4
5
6
7
AUTO
"0" = "OFF" position
"1" = "ON" position.
AUTO=a sequence of 7 programs
1) SINGLE Output Mode, one output with R.G.B.A which was controlled by DMX channel 1, the output of
R.G.B.A is identical.
In this function, user can flip the dip-switch 11 & 12(12-way function Dip Switch ) to selec t the desired Output
Loading Mode.
1.3 Loading Mode Setting
1 2 3 4 5 6
OUTPUT TERMINALS
OUTPUT
11
12
1 =ON
0=OFF
00 SINGLE
10 COLOR
01 RGB
11 RGBA
2) COLOR Mode , one output which color of R.G.B. Was controlled by one channel 1.No output for A.
3) RGB Mode , one output which RGB was controlled by 3 DMX channels separately. No output for A
4) RGBA Mode , one output which R.G.B.A was controlled by 4 DMX channels separately.
7 8
1
2
3
4
5 6
7
8
Red+ Red-
Green+
Blue+ Blue- A/W+ A/W-
Green-
Page 4
www.AcclaimLighting.com
2.Technical Specications
8 output terminal strips or 8-position Dual RJ45 receptacles, 4x350mA per output
Output
3-pin male XLR connector or terminal strips
DMX In
DC24V
Power Input
Weight
0.292kg
DMX Out
117.6x100x23mm
Dimensions
3-pin female XLR connector or terminal strips
3.Physical Dimensions
*Please Note
Specifications and improvements in the design of this unit and this manual are subject to change without any
prior written notice.
23
117.6
100
80
91
Top View
weiVediSweiVediS
ColorRay MR Driver
Page 5
www.AcclaimLighting.com
/