Whalen SPLS-RFL-WH is designed to help keep your files organized and secure. It has a maximum weight load of 100 lb, 50 lb, and 30 lb for the top panel, fixed shelf, and drawer respectively. It comes with two file hangers to accommodate either letter or legal-sized folders. The drawer is supported by 16” ball bearing slides and swivel casters for easy movement.
Whalen SPLS-RFL-WH is designed to help keep your files organized and secure. It has a maximum weight load of 100 lb, 50 lb, and 30 lb for the top panel, fixed shelf, and drawer respectively. It comes with two file hangers to accommodate either letter or legal-sized folders. The drawer is supported by 16” ball bearing slides and swivel casters for easy movement.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing Page 1 Factory No. 15548
Date 2014-11-20 Rev. 1 Factory: DOGULU
Raine File White
Model # SPLS-RFL-WH
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
LOT NUMBER:
DATE PURCHASED:
/
/
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 2 Factory No. 15548
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Raine File White (SPLS-RFL-WH)
DATE OF MANUFACTURE: December 2014
MADE IN CHINA
SPECIAL NOTE
Please read the instruction sheets completely before assembly. Examine all packaging
material before discarding carton. Remove any remaining staples from the carton before
discarding. Remove all parts from carton and separate into groups as indicated on part
list. Please ensure all parts are included prior to assembly. Use of power tools to
complete assembly is not recommended.
THIS UNIT IS INTENDED FOR USE ONLY WITH THE
MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE
MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING
POSSIBLE INJURY.
MAXIMUM LOAD 30 lb. (13.6 kg)
MAXIMUM LOAD 100 lb. (45.3 kg)
MAXIMUM RECOMMENDED WEIGHT LOADS
MAXIMUM LOAD 50 lb. (22.7 kg)
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 3 Factory No. 15548
Important
Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-
abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF
WITH DAMP CLOTH.
Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.
You are now ready to assemble the KD unit.
X
X
FINAL
12 43
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 4 Factory No. 15548
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Left Side Frame (1) B- Right Side Frame (1) C- Top Panel (1)
D- Fixed Shelf (1) E- Bottom Crossbar (1) F- Back Panel (1)
G- Drawer Front (1) H- Drawer Back Panel (1) I- Drawer Left Side (1)
J- Drawer Right Side (1) K- Drawer Bottom Panel (1) L- Drawer Bottom Support (1)
M- Caster Support (1) N- Guide Rail (2) O- File Hanger (2) P- 16” Ball Bearing Slides (2)
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 5 Factory No. 15548
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
(1) Small Cam Lock (2) Large Cam Lock (3) Small Cam Bolt (4) Large Cam Bolt
(4+1 extra) (18+1 extra) (4+1 extra) (18+1 extra)
(5) M8 x 30 mm Wood Dowel
(6) Ø3.5 x 12 mm Screw (7) Ø3.5 x 15 mm Screw
(13+1 extra) (12+1 extra) (4+1 extra)
(8) Ø4 x 25 mm
Screw (9) Ø4 x 32 mm Wood Screw (10) Handle (11) Handle Bolt
(4+1 extra) (8+1 extra) (1) (1)
(12) Swivel Caster (1) (13) Cam Lock Cover (8+1 extra) Glue (1) Touch-up Pen (1)
Tools required:
Phillips screwdriver and hammer (not provided).
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 6 Factory No. 15548
Drawer Assembling
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Pick up the 16” Ball Bearing Slides (P) and separate the Slide Runners for the following steps. Extend
the Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and
pull the Slide Runner complete out.
3. Attach the separated Slide Runners (P) to the Drawer Side Panels (I and J) respectively, using three
12 mm Screws (6) per slide runner. As shown. Make sure that the slide opening points towards the edge
with two vertical through holes in a line running against.
4. Align and attach the Caster Support (M) to the bottom side of the Drawer Bottom Support (L) by using four
25 mm
Screws (8) through the countersunk holes and screw into place, as shown.
5. Proceed to fasten the Swivel Caster (12) onto the Caster Support (M) with four 15 mm Pan Head Screws
(7), using the pilot holes as a guide. Tighten the screws with a Phillips screwdriver.
6
J
P
6
P
P
I
L
M
8
7
M
L
12
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 7 Factory No. 15548
Drawer Assembling
6. Locate the Drawer Front (G) on a carpeted floor with the holes facing up. Securely screw four Small
Cam Bolts (3) into the designated small holes as shown in the illustration.
7. Attach the Drawer Side Panels (I and J) to the Drawer Front (G) by engaging four Small Cam Locks (1)
(Refer to page 3 on Cam Lock system operation supplement). Make sure that the grooves face inward
and line up with each other.
8. Attach the Drawer Bottom Support (L) between the Drawer Side Panels (I and J) with the installed
Caster (12) facing out, using four 32 mm
Wood Screws (9). As shown.
3
3
3
3
1
1
G
G
J
I
G
J
I
L
L
J
I
9
9
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 8 Factory No. 15548
Drawer Assembling
9. Slide the Drawer Bottom Panel (K) into the grooves between the Drawer Side Panels (I and J) until fully
inserted into the Drawer Front (G). Make sure the finished surface will face up. As shown.
10. Fasten the Drawer Back Panel (H) to Drawer Side Panels (I and J) using four 32 mm
Wood Screws (9).
Make sure that Drawer Bottom Panel (K) fits securely into the groove of the Drawer Back Panel (H).
Tighten all the screws with a Phillips screwdriver.
9
H
J
J
I
K
H
I
9
J
I
L
K
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 9 Factory No. 15548
Assembly Instructions
11. Turn the assembled drawer upright. Fit 2 Guide Rails (N) onto the Drawer Side Panels (I and J) with the
high side facing inward. As shown.
12. Hook 2 File Hangers (O) onto the high edge of the Guide Rails (N). Slide the File Hangers front and
back to accommodate letter or legal-sized folders.
13. Attach the Handle (10) to the outside of Drawer Front (G) using the provided Handle Bolt (11).
14. With the pilot holes as a guide, attach the separated Slide Tracks (P) to the slide supports on the Left
and Right Side Frames (A and B) respectively, using three 12 mm Screws (6) per slide track. As shown.
Make sure that the slide opening faces the front of the unit.
P
6
6
6
P
P
B
A
6
11
J
O
N
G
I
10
O
N
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 10 Factory No. 15548
Assembly Instructions
15. Securely screw the Large Cam Bolts (4) into the designated small holes on the Side Frames (A and B)
and the Top Panel (C), as shown in the illustration.
16. Attach the Fixed Shelf (D) to the Back Panel (F) with two Wood Dowels (5). As shown. Make sure that
the molding of Fixed Shelf (D) will face the bottom of the unit.
F
D
5
5
4
4
4
A
B
4
4
4
4
4
C
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 11 Factory No. 15548
Assembly Instructions
17. Insert four Wood Dowels (5) into the middle end holes of the Fixed Shelf (D) and the Back Panel (F) at
both ends. DO NOT put dowels into the Cam Bolt holes.
18. Align the inserted Wood Dowels (5) on last assembly with the drilled holes on the Right Side Frame (B)
and press them together. Secure the unit in place by engaging four Large Cam Locks (2).
19. Align and attach the Bottom Crossbar (E) to the Right Side Frame (B) using two Wood Dowels (5) and
two Large Cam Locks (2). As shown. Make sure that the cutout of Bottom Crossbar (E) points towards
the front of the unit and the Cam Locks will face the floor.
20. Repeat the same procedure to attach the Left Side Frame (A) at the opposite end.
21. Insert three Wood Dowels (5) into the top middle holes of the Side Frames (A and B) and the Back
Panel (F). Position the Top Panel (C) onto the inserted Wood Dowels (5) and attach it in place by
engaging six Large Cam Locks (2). As shown.
5
5
2
2
F
D
E
A
B
5
5
2
2
2
2
5
5
5
5
2
C
F
A
B
5
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 12 Factory No. 15548
Assembly Instructions
22. Stand the unit upright.
23. Plug the Cam Lock Covers (13) onto the visible Cams Locks to conceal the Cams.
24. Extend the Sliding Tracks on the Side Frames (A and B) all the way forward (including ball bearing
cart). Then align the Slide Runners on the assembled drawer with the Slide Tracks and push the drawer
carefully inside until it stops.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release
lever of the ball bearing slide up on one side and down on the other side, and then pull it completely out.
13
C
A
B
J
G
I
Model # SPLS-RFL-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Page 13 Factory No. 15548
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage your furniture’s finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or
shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from province to
province (state to state).
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenfurniture.com
IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW
Raine File White (SPLS-RFL-WH)
*SPLS-RFL-WH-1-TP Top Panel *SPLS-RFL-WH-17-SCL Small Cam Lock
*SPLS-RFL-WH-2-LSF Left Side Frame *SPLS-RFL-WH-18-LCL Large Cam Lock
*SPLS-RFL-WH-3-RSF Right Side Frame *SPLS-RFL-WH-19-SCB Small Cam Bolt
*SPLS-RFL-WH-4-FS Fixed Shelf *SPLS-RFL-WH-20-LCB Large Cam Bolt
*SPLS-RFL-WH-5-BC Bottom Crossbar *SPLS-RFL-WH-21-M8x30WD M8 x 30 mm Wood Dowel
*SPLS-RFL-WH-6-BP Back Panel *SPLS-RFL-WH-22-12S Ø3.5 x 12 mm Screw
*SPLS-RFL-WH-7-DF Drawer Front *SPLS-RFL-WH-23-15S Ø3.5 x 15 mm Screw
*SPLS-RFL-WH-8-DLSP Drawer Left Side Panel *SPLS-RFL-WH-24-25S Ø4 x 25 mm Screw
*SPLS-RFL-WH-9-DRSP Drawer Right Side Panel *SPLS-RFL-WH-25-32WS Ø4 x 32 mm Wood Screw
*SPLS-RFL-WH-10-DBP Drawer Back Panel *SPLS-RFL-WH-26-H Handle
*SPLS-RFL-WH-11-DBP Drawer Bottom Panel *SPLS-RFL-WH-27-22HB 22 mm Handle Bolt
*SPLS-RFL-WH-12-DBS Drawer Bottom Support *SPLS-RFL-WH-28-SC Swivel Caster
*SPLS-RFL-WH-13-CS Caster Support *SPLS-RFL-WH-29-G Glue
*SPLS-RFL-WH-14-16BBS 16” Ball Bearing Slides *SPLS-RFL-WH-30-CLC Cam Lock Cover
*
SPLS RFL WH 15 GR
Guide Rail
*
SPLS RFL WH 31 TUP
Touch up Pen
SPLS
-
RFL
-
WH
-
15
-
GR
Guide
Rail
SPLS
-
RFL
-
WH
-
31
-
TUP
Touch
-
up
Pen
*SPLS-RFL-WH-16-FH File Hanger *SPLS-RFL-WH-CH Complete Hardware
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Whalen SPLS-RFL-WH is designed to help keep your files organized and secure. It has a maximum weight load of 100 lb, 50 lb, and 30 lb for the top panel, fixed shelf, and drawer respectively. It comes with two file hangers to accommodate either letter or legal-sized folders. The drawer is supported by 16” ball bearing slides and swivel casters for easy movement.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whalen SPLS-RDS-WH User manual
-
Whalen WS3060926FP Operating instructions
-
Whalen SPLS-RBK-WH User manual
-
Whalen DMRD-E / 855284 User manual
-
Whalen WS-RWTB-4D User manual
-
Whalen SPUS-BLDH User manual
-
Whalen 618127 User manual
-
Whalen SPCA-GDH User manual
-
Whalen SAGE7PD-E User manual
-
Whalen WSHDFOW User manual
Other documents
-
Simpli Home AXCBCACA-05 Installation guide
-
Furniture of America IDF-AC291BK-3 Installation guide
-
Walker V42GBB User manual
-
Displays2go DBMOTOWS Assembly Instructions
-
Home Decorators Collection 1590000410 Installation guide
-
-
Furniture of America IDF-AC331 Installation guide
-
Swiss Madison SM-BV901WG SM-BV901WG Installation guide
-
-
