Refer to Part II when you need to learn the meanings of features in these
areas. (To learn how to use statistics screens, NCL commands, the Event
Log, and the MIB variables, refer to the User’s Guide.)
Coverage Note This manual addresses the entire range of parameters and other soft-
ware features found in Hewlett-Packard routers, including features that
are not found on all router models. Thus, for some routers, such as the
HP Router PR (J2540), certain features described in this manual are not
available in the router. For information on the features available in your
router, refer to the release notes you received with the router or most
recent software upgrade.
Audience
This guide is intended for network mangers and other technicians who
install, configure, and manage routers.
Organization
Part I: Dictionary of Configuration Parameters logically groups the
Configuration Editor parameters into chapters, according to the options in
the Configuration menu. Each chapter contains an alphabetical listing of the
indicated parameters, along with their corresponding options and descrip-
tions. The individual chapters are:
Chapter 1, ‘‘Global and Session Parameters’’
Chapter 2, ‘‘Software Parameters’’
Chapter 3, ‘‘Lines Parameters’’
Chapter 4, ‘‘Circuits Parameters’’
Chapter 5, “Circuit Group Parameters’’
Chapter 6, ‘‘Bridge Parameters’’
Chapter 7, ‘‘Internet Protocol (IP) Parameters’’
Chapter 8, ‘‘DECnet Parameters’’
Chapter 9, ‘‘SNMP Parameters’’
Operator’s Reference
Preface
4