Sales Support - Projection
www.barco.com
Page 1 of 2
V1.0 – CMAD 02/15
INFITEC Glasses Options
GENERAL RELEASE APPROVED
INFITEC
®
Glasses Options
For your convenience Barco resells selective INFITEC
®
glasses via its Projection, Collaboration & IP
Products Pricelist. A brief overview of these products is provided below.
About:-
INFITEC
®
designs, manufactures and markets a range of high performance glasses and supporting
systems for graphically challenging applications. Glasses are lightweight and ergonomic. They can be
worn for extended periods without causing fatigue.
Warranty:-
INFITEC
®
products are supplied with a 2 year manufacturer’s limited warranty (refer to manufacturer
for further information).
The following INFITEC
®
Glasses are available for purchase through Barco:-
Standard INFITEC
®
Options:-
Barco Part No’
R9801296
(Infitec Plus Glasses)
Product Description
Wide Field of View, foldable arms
Dimensions
28.5 x 45.5 mm
Lens Type
Curved
Weight
46g
Suggested Application
Events & Theme Parks
Barco Part No’
R9801297
(Infitec Premium Glasses)
Product Description
Wide Field of View, foldable arms
Dimensions
62 x 45 mm
Lens Type
Curved
Weight
73g
Suggested Application
Simulation, Virtual Reality &
Theme Parks
Sales Support - Projection
www.barco.com
Page 2 of 2
V1.0 – CMAD 02/15
INFITEC Glasses Options
GENERAL RELEASE APPROVED
INFITEC
®
EX Glasses Options:-
Barco Part No’
R9801207
(Infitec Plus Ex Glasses)
Product Description
Wide Field of View, foldable arms
Dimensions
28.5 x 45.5 mm
Lens Type
Curved
Weight
46g
Suggested Application
Events & Theme Parks
Barco Part No’
R9801298
(Infitec Premium Ex Glasses)
Product Description
Wide Field of View, foldable arms
Dimensions
62 x 45 mm
Lens Type
Curved
Weight
73g
Suggested Application
Simulation, Virtual Reality &
Theme Parks
Additional Information – Metallic Content (applicable to medical imaging applications):-
Infitec Plus and Infitec Plus EX Glasses both have metal hinges. As standard they are supplied
with a metal foil label.
Premium Infitec and Premium Infitec Ex Glasses both have plastic hinges. As standard they are
supplied with a metal foil label.
INFITEC
®
recommends the use of Premium Glasses for Medical Imaging applications. These
glasses can be custom ordered minus the metal foil label direct from the manufacturer.
Specifications correct based upon information available on the manufactures website. Errors and
omissions exempt. Please refer to http://www.infitec.net for additional information.
/
