Roche COBAS AMPLIPREP User manual

Type
User manual

This manual is also suitable for

Roche COBAS AMPLIPREP is a fully automated sample preparation system designed to simplify and expedite molecular diagnostic testing. It offers several key features and capabilities to enhance your laboratory workflow:

  • Automation: The system automates the entire sample preparation process, from nucleic acid extraction to amplification-ready samples, reducing manual labor and the risk of contamination.

  • High Throughput: With the ability to process up to 96 samples simultaneously, COBAS AMPLIPREP enables rapid and efficient sample processing, meeting the demands of high-volume testing laboratories.

Roche COBAS AMPLIPREP is a fully automated sample preparation system designed to simplify and expedite molecular diagnostic testing. It offers several key features and capabilities to enhance your laboratory workflow:

  • Automation: The system automates the entire sample preparation process, from nucleic acid extraction to amplification-ready samples, reducing manual labor and the risk of contamination.

  • High Throughput: With the ability to process up to 96 samples simultaneously, COBAS AMPLIPREP enables rapid and efficient sample processing, meeting the demands of high-volume testing laboratories.

COBAS
®
AmpliPrep Instrument
Addendum version 1.0
For use with the AMPLILINK Software
Roche Diagnostics
2 Addendum · version 1.0
1 COBAS® AmpliPrep Instrument
Publication information
Edition notice
This addendum contains revisions to released COBAS
®
AmpliPrep Instrument
publications.
CAUTION
General attention
To avoid serious or fatal injury, ensure that you are familiar with the system and safety
information before you use the system.
r Pay particular attention to all safety precautions.
r Always follow the instructions in this publication.
r Do not use the instrument in a way that is not described in this publication.
r Store all publications in a safe and easily retrievable place.
Copyright © 2016, F. Hoffmann-La Roche Ltd. All rights reserved.
Trademarks The following trademarks are acknowledged:
AMPLILINK, COBAS, AMPLIPREP, and TAQMAN are trademarks of Roche.
All other trademarks are the property of their respective owners.
Feedback Every effort has been made to ensure that this publication fulfills the intended use. All
feedback on any aspect of this publication is welcome and is considered during
updates. Contact your Roche representative, should you have any such feedback.
Contact addresses
Publication version Revision date Changes
1.0 September 2016 First version
Table 1 Revision history
Roche Molecular Systems, Inc.
1080 US Highway 202 South
Branchburg, NJ 08876
USA
Made in Switzerland
Roche Diagnostics GmbH
Sandhofer Strasse 116
68305 Mannheim
Germany
Roche Diagnostics
Addendum · version 1.0 3
COBAS® AmpliPrep Instrument
T
able of contents
About the addendum content...............................................................................................4
Revisions to COBAS
®
AmpliPrep Instrument publications..............................................5
Revision 1: Addition of RoHS directive and update of CE compliance....................5
Revision 2: Addition of information about a fluorinated greenhouse gas ...............6
Revision 3: Addition of print quality details for barcodes..........................................7
COBAS® AmpliPrep Instrument
Roche Diagnostics
4 Addendum · version 1.0
About the addendum content
Roche recommends that you familiarize yourself with the new and/or revised content
provided in this addendum.
The following illustration explains how this content is presented in this document.
Figure 1 Structure of a revision
q
If you print these pages, Roche recommends printing them single-sided. In this way, you
can easily insert the new and/or revised content in its appropriate location(s) in the
existing document.
A Change ID C Topic affected
B Change summary D Changed element
B
C
D
A
Roche Diagnostics
Addendum · version 1.0 5
COBAS® AmpliPrep Instrument Revisions to COBAS
®
AmpliPrep Instrument publications
Revision 1: Addition of RoHS directive and update of CE compliance
Revisions to COBAS
®
AmpliPrep Instrument publications
Revision 1: Addition of RoHS directive and update of CE compliance
Approvals
The COBAS
®
AmpliPrep Instrument meets the requirements laid down in:
Directive 98/79/EC of the European Parliament and of the Council of 27 October
1998 on in vitro diagnostic medical devices.
Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011
on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
Compliance is provided by means of the Declaration of Conformity.
The following marks demonstrate compliance:
Publication title Publication version Software version Publication date Revised topic title
Instrument Manual
For use with the AMPLILINK
Software
2.0 3.3 and 3.4 June 2015 Publication information
Instrument Manual
For use with the
cobas s 201 system Operator’s
Manual and the AMPLILINK
Software
2.0 3.3 September 2014 Publication information
Table 2 Revision location
For in vitro diagnostic use.
Complies with the provisions of the applicable EU directives.
Issued by Underwriters Laboratories, Inc. (UL) for Canada and the
US.
Roche Diagnostics
6 Addendum · version 1.0
Revisions to COBAS
®
AmpliPrep Instrument publications COBAS® AmpliPrep Instrument
Revision 2: Addition of information about a fluorinated greenhouse gas
Revision 2: Addition of information about a fluorinated greenhouse gas
Fluorinated greenhouse gas The product contains a fluorinated greenhouse gas in the hermetically sealed
refrigeration.
Publication title Publication version Software version Publication date Revised topic title
Instrument Manual
For use with the AMPLILINK
Software
2.0 3.3 and 3.4 June 2015 Publication information
Table 3 Revision location
Type Charge weight (kg) CO
2
equivalent
(tonne)
Global warming
potential
R134a 0.200 0.286 1430
Table 4 Fluorinated greenhouse gas detail
Roche Diagnostics
Addendum · version 1.0 7
COBAS® AmpliPrep Instrument Revisions to COBAS
®
AmpliPrep Instrument publications
Revision 3: Addition of print quality details for barcodes
Revision 3: Addition of print quality details for barcodes
Barcode scanner
Publication title Publication version Software version Publication date Revised topic title
Instrument Manual
For use with the AMPLILINK
Software
2.0 3.3 and 3.4 June 2015 System description > Overview
> Technical specifications
Instrument Manual
For use with the
cobas s 201 system Operator’s
Manual and the AMPLILINK
Software
2.0 3.3 September 2014 System description > Overview
> Technical specifications
Table 5 Revision location
COBAS
®
AmpliPrep Instrument
A barcode scanner automatically reads barcodes on racks,
reagent cassettes, sample clips, and special control clips as
racks are loaded onto the instrument.
Print quality
Specimen barcodes should be printed to achieve ISO/IEC
15416 Grade 2.5 - 4.0 (formerly ANSI X3.182 - 1990
Grade A or B) to ensure reliable barcode reading.
Roche Diagnostics
8 Addendum · version 1.0
Revisions to COBAS
®
AmpliPrep Instrument publications COBAS® AmpliPrep Instrument
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Roche COBAS AMPLIPREP User manual

Type
User manual
This manual is also suitable for

Roche COBAS AMPLIPREP is a fully automated sample preparation system designed to simplify and expedite molecular diagnostic testing. It offers several key features and capabilities to enhance your laboratory workflow:

  • Automation: The system automates the entire sample preparation process, from nucleic acid extraction to amplification-ready samples, reducing manual labor and the risk of contamination.

  • High Throughput: With the ability to process up to 96 samples simultaneously, COBAS AMPLIPREP enables rapid and efficient sample processing, meeting the demands of high-volume testing laboratories.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI