KOAMTAC KDC380 EZ Charging Adaptor Assembly Instructions

What’s in the box?

• EZ Charging Adaptor

• Steel Plate

KDC350 EZ Charging

Adaptor Assembly Manual

*KDC350 Bluetooth Barcode

Scanner sold separately.

Additional KDC350 Accessories:

• Finger Trigger Glove

• Charging Cradle

• Protective Boot

Assembly Instructions:

1. Remove blue protection tape from steel plate. (A,B)

2. Align steel plate as indicated below, ensuring the

back battery cover and left charging pin are not

covered. (C)

3. Conrm the placement of steel plate and attach to

KDC350. (D, E)

4. Verify alignment of EZ Charging Adaptor matches

bottom of KDC350; Connect KDC350 and Adaptor. (G)

5. Adaptor should be connected as indicated. (H,I)

This manual is also suitable for

Download PDF