Star Trac 8TRx-PVS Installation guide

Brand: Star Trac

Model: 8TRx-PVS

Type: Installation guide

This manual is also suitable for

ASSEMBLY

MANUAL

8-TRx

Core Health & Fitness

Star Trac

Page 1

9-9251 - 110V, 18AMP

9-9252 - 220V, UL/FCC

9-9254 - 220V, 10AMP. CE

9-9201 - 110V, 18AMP, CSA/UL/FCC

9-9202 - 220V, UL

9-9204 - 220V, CE 8-TRx

Overall Weight Width Length Height Max User Weight

475 lbs (167.5 kg) 38.6 in (98 cm) 85.9 in (218.2 cm) 31.7 in (80.5 cm) 0-350 lbs (0-159 kg)

All products may be covered by US and Foreign Patents and Patents Pending.

PRODUCT SPOTLIGHT

Page 2

SKU Description

701-0002-XX RAIL, SIDE, LT, E-TRx

701-0003-XX RAIL, SIDE, RT, E-TRx

020-7528 GROMMET, HANDRAIL, LEFT, E-TRX, TEARDROP

020-7527 GROMMET, HANDRAIL, RIGHT, E-TRX, TEARDROP

110-3416 SCREW, 5/16-18 X 1, SHC, HE, AS, BO, NP

120-0496

WASHER, LOCK, SPLIT, 0.58 OD, 0.32 ID, 0.078

THK, CS, ZP

120-0490

WASHER, 5/16 SAE FLAT, 11/16” OD X 11/32” ID,

.06 THICK

020-7528 GROMMET, HANDRAIL, LEFT, E-TRX, TEARDROP

715-4034-XX ASSY, NECK, E-TRxe

110-3126

SCREW, 5/16-18x3.0, FULL THD, SHC, HE, CS, ZI,

715-4032-XX NECK SPACER, RAIL SHAPE

715-4031-XX RAIL SPACER, TEAR-DROP SHAPE

715-4137-XX ASSY, HANDRAIL, W/HB, 8TRx/TC

110-0506 SCREW, 1/4-28, 3/8, BHC, HK, AS, BO, NP

740-4588 Screw, M8x1.25, 16mm, BHC, HK, SS

731-0561 WASHER,M8,1MM THK

020-7034-XX Shroud Motor, E-TRx

715-3959-XX COVER, PLASTIC, RAIL, LEFT

715-3862-XX COVER, PLASTIC, RAIL, RIGHT

110-3450 Screw, 10-24, 3/4”, THM, PH, CS, ZP

020-7232-XX CAP MOTOR SHROUD , E-TRx

140-3428 GROMMET NECK 6”X2” , OX

020-7460-XX PLASTICS, DISPLAY, MAIN REAR, TM-TC

701-0210-XX

PLASTIC, DISPLAY, LCD, DECORATIVE, QKS,

TREAD, W/ INSERTS

Required Tools:

• 1/4” Allen Key

• 5/32” Allen Key

• #2 Phillips Screwdriver

Page 3

1. Use a 1/4” allen key to install the left side rail

(701-0002-XX) to the frame using three (3) pieces

each of the 5/16” x 1” socket head cap screw

(110-3416), 5/16” split lock washer (120-0496),

and 5/16”  at washer (120-0490). Once the

handrail is installed, slide the left side handrail

grommet (020-7528) onto the rail - be careful of

orientation of the grommet.

2. Repeat Step 1 for the right side rail (701-0003-XX)

and rail grommet (020-7527).

DO NOT FULLY TIGHTEN

3. Use a 1/4” allen key to install the mast (715-4034-

XX) to the frame using two (2) pieces each of the

5/16” x 1” and 5/16” x 3” (110-3126) socket head

cap screws, and four (4) pieces each of the 5/16”

split lock washer and 5/16”  at washer.

DO NOT FULLY TIGHTEN

4. Ensure that the supplementary power cable is

connected to the J20 port on the MCB and the

main data cable is connected to the J1 port on

the MCB.

J20 -

Supplementary

Power

J1 -

Main

Data

Cable

5. Install the mast beauty ring (715-4032-XX) onto

the mast, ensure that the tab on the ring is facing

in towards the rear of the unit.

6. Install one (1) rail beauty ring (715-4031-XX)

onto both the left and right rails. Ensure that the

small cutout on the bottom of the ring is facing

forward to the front of the machine.

Page 4

7. Install the upper handrail assembly (715-4137-

XX) onto the mast and the left and right rails,

then use 5/32” allen key to secure the upper

handrail to the rails using four (4) pieces of the

1/4” x 3/8” button head cap screw (110-0506).

8. Secure the upper handrail to the mast using four

(4) pieces each of the M8 x 16mm button head

cap screw (740-4588) and M8  at washer (731-

0561).

9. Use a 1/4” allen key to fully tighten the hardware

from Steps 1-3.

10. Install the motor shroud(020-7034-XX), left side

deck cover(715-3959-XX), and right side deck

cover (715-3862-XX) onto the frame, then use a

#2 phillips screwdriver to secure the shrouds to

the frame using four (4) pieces of the 10-24 x 3/4”

pan head machine screw (110-3450).

11. Use a #2 phillips screwdriver to  nish securing

the motor shroud to the frame using two (2)

pieces of the 10-24 x 3/4” pan head machine

screw, then slide the motor shroud cap (020-

7232-XX) into place. Finally, install the mast

grommet (140-3428) ensuring a tight seat

between the mast, motor shroud, and motor

shroud cap.

Page 5

12. Use a #2 phillips screwdriver to secure the back

console shroud (020-7460-XX) to the console

weldment using ten (10) pieces each of the #8-18

x 3/4” screw (110-3402) and M4 washer (120-

3307).

13. Refer to the documentation contained inside the

console box in order to connect the console to

the unit.

NOTE: Depending on which console was purchased,

the install instructions could di er.

14. Use a #2 phillips screwdriver to secure the

console front (701-0210-XX) to the back shroud

using ten (10) pieces of the #8-18 x 3/4” screw.

15. Plug the power cable into the power inlet on

the bottom of the machine, then route the cable

through the power cord retention brackets and

tighten with a #2 phillips screwdriver to secure

the cord.

Page 6

The Support website provides a wealth of resources to help you get the best experience from your

unit. It is important to check the website periodically for Owner’s Manual and Installation Instruc-

tions, Service Bulletins, and other information. The resources include:

• Contact number and email for Technical Support

Go to https://support.corehandf.com/ for support information and information on all

Startrac products.

• Warranty information is available at: https://corehandf.com/warranty

•

Updated Owner’s Manual, Assembly Manual, Service Manual, Service Bulletins,

Instructional Videos, and other information are at: https://support.corehandf.com/8TRX

Contact Information

CORE HEALTH & FITNESS

4400 NE 77th Avenue, Suite 300

Vancouver, WA 98662

Telephone: (888) 678-2476

http://www.corehandf.com

Customer Support

Contact your local distributor, or Core Health &

Fitness directly at: 1-800-503-1221

support@corehandf.com

Please supply the serial number of your unit and the date of purchase when you call. Use the space

in the boxes below to write down this information.

Serial Number

Date of Purchase

You may download the latest version of the Installation Guide, as well as view instructional videos,

by visiting the support website at:

https://support.corehandf.com/8TRX

SUPPORT AND SERVICE

Star Trac 8TRx-PVS Installation guide

Brand: Star Trac

Model: 8TRx-PVS

Type: Installation guide

This manual is also suitable for

Download PDF

report

Star Trac 8TRx-PVS Installation guide

This manual is also suitable for

Star Trac 8TRx-PVS Installation guide

Related papers

Other documents