Hagerco 908S - Door Bottom | Hospitality Installation guide

908S - Door Bottom | Hospitality
Hagerco
Brand
Hagerco
Model
908S - Door Bottom | Hospitality
Type
Installation guide

This manual is also suitable for

906S – 909S Finned Door Shoes
Installation Instructions
6500-8030 / I-TW00288
Rev 3, Rev Date: 5/19/2020 6500-0830 Page 1 of 1
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
Do not install so that the product inhibits the opening or closing of the door.
1. Check the adjustment of the door to insure the door assembly closes and latches properly.
2. Measure for exact size.
3. Use hacksaw to cut door shoe to length.
4. Slide the door shoe onto bottom of door and position so the gasket touches the threshold or floor. Mark for
screw holes and drill pilot holes.
5. Install all screws by working from one end of the holder to the other. Slotted holes allow adjustment to maintain
Installation Tips:
Avoid cutting next to a screw hole, if necessary to shorten, cut length from each end. Locate holes and screws where
they will not interfere with butting part together.
906S
POSITIVE PRESSURE TESTED GASKETING MATERIALS
FOR FIRE DOORS FOR APPLICATION TO HOLLOW-
METAL-TYPE FIRE DOORS RATED UP TO 3 HOURS,
WOOD AND PLASTIC COVERED COMPOSITE-TYPE FIRE
DOORS RATED UP TO 1-1/2 HOURS AND WOOD CORE
DOORS RATED UP TO 20M
906SN, 907S, 907SN, 908S, 908SN, 909S, 909SN
GASKETING MATERIALS FOR FIRE DOORS FOR
APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS
RATED UP TO 3 HOURS, WOOD AND PLASTIC
COVERED COMPOSITE-TYPE FIRE DOORS RATED UP
TO 1-1/2 HOURS AND WOOD CORE DOORS RATED UP
TO 20M
  • Page 1 1

Hagerco 908S - Door Bottom | Hospitality Installation guide

908S - Door Bottom | Hospitality
Hagerco
Brand
Hagerco
Model
908S - Door Bottom | Hospitality
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents