Hagerco 904S - Vinyl Carpet / Tile Transition Installation guide

PVC Carpet/Tile Dividers

Installation Instructions

6500-8032 / I-TW00287

Rev 1, Rev Date: 12/5/2017 6500-8032 Page 1 of 1

Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com

Do not install so that the product inhibits the opening or closing of the door.

1. Check the adjustment of the door to insure the door assembly closes and latches properly.

2. Measure for exact size.

3. Cut threshold to size required.

4. Notch around door frame if required.

5. Apply solid beads of adhesive to underside of threshold legs. When set the adhesive should spread thinly to cover

base of all legs.

NOTE: Adhesive must be type designed to bond PVC, concrete, wood, metal or other material that threshold is

being bonded to.

DO NOT WALK ON OR APPLY WEIGHT TO THRESHOLD FOR 24 HOURS ALLOWING ADHESIVE TO FULLY CURE.

POSITIVE PRESSURE TESTED GASKETING MATERIALS FOR FIRE DOORS

FOR APPLICATION TO HOLLOW-METAL-TYPE FIRE DOORS RATED UP TO

3 HOURS, WOOD AND PLASTIC COVERED COMPOSITE-TYPE FIRE

DOORS RATED UP TO 1-1/2 HOURS AND WOOD CORE DOORS RATED

UP TO 20M

This manual is also suitable for

Download PDF