Panasonic 999-6120-000K User manual

Operating Instructions

HD Integrated Camera

VQT3U65A(E)M1111MS0 -FJ

ENGLISH

 How the Operating Instructions are configured

<Basics>:

The <Basics> describes the procedure for basic operation and installation. Before installing this unit, be

sure to take the time to read through <Basics> to ensure that the unit will be installed correctly.

<Operations and Settings> (this manual):

This <Operations and Settings> describes how to operate the unit and how to establish its

settings.

Model No.

Before useWeb setting Camera menu Basic

operations Adjustment ShootingOther settingsReference

2

Trademarks and registered trademarks

 Microsoft, Windows, Windows Vista, Windows 7 and

Internet Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States

and other countries.

 Intel and Intel Core are trademarks or registered

trademarks of Intel Corporation in the United States and

other countries.

 Adobe and Reader are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

 HDMI, the HDMI logo and High-Definition Multimedia

Interface are the trademarks or registered trademarks

of HDMI Licensing, LLC in the United States and other

countries.

 Other names of companies and products contained

in these Operating Instructions may be trademarks or

registered trademarks of their respective owners.

About copyright and licence

Distributing, copying, disassembling, reverse compiling,

reverse engineering, and also exporting in violation of export

laws of the software provided with this unit are expressly

prohibited.

Abbreviations

The following abbreviations are used in this manual.

 Microsoft® Windows® 7 Professional SP1 32/64-bit is

abbreviated to “Windows 7”.

 Microsoft® Windows Vista® Business SP2 32-bit is

abbreviated to “Windows Vista”.

 Microsoft® Windows® XP Professional SP3 and Microsoft®

Windows® XP Home Edition SP3 are abbreviated to

“Windows XP”.

 Windows® Internet Explorer® 8.0 and Windows® Internet

Explorer® 9.0 are abbreviated to “Internet Explorer”.

For the purposes of this manual, the model numbers of the

units are given as listed in the table below.

Model number

of unit Model number

given in manual

AW-HE120WP

AW-HE120

AW-HE120KP

AW-HE120WE

AW-HE120KE

AW-HS50N AW-HS50

AW-HS50E

AW-PS550N AW-PS550

AW-PS550E

AW-RP50N AW-RP50

AW-RP50E

AW-RP555N AW-RP555

AW-RP555L

AW-RP655N AW-RP655

AW-RP655L

Illustrations and screen displays featured in the

manual

 What is shown in the manual’s illustrations and screen

displays may differ from how it is actually appears.

3

Contents

Before use ...........................................................................4

Overview ..........................................................................4

Required personal computer environment .......................4

Disclaimer of warranty......................................................5

Network security ..............................................................5

Basic shooting operations ................................................6

How to turn the power on and off .....................................7

Turning the power on .......................................................7

Turning the power off .......................................................8

Selecting the units ..............................................................9

Selecting the shooting modes (scene files) .....................9

Types of shooting modes .................................................9

How to select the shooting mode ...................................10

Shooting ............................................................................12

What to do when encountering problems

in the basic shooting operations ................................13

More advanced operations ..............................................14

Manual shooting ...............................................................15

Manually adjusting the focus ..........................................15

Manually adjusting the iris ..............................................16

Manually adjusting the shutter speed ............................17

Manually adjusting the gain ...........................................18

Preset memories ...............................................................19

White balance adjustment ...............................................22

White balance adjustment ..............................................22

Black balance adjustment ...............................................25

Black balance adjustment ..............................................25

Black level (master pedestal) adjustment ......................26

Black level (master pedestal) adjustment.......................26

Genlock adjustment .........................................................28

Genlock adjustment .......................................................28

Basic operations ...............................................................29

When performing the operations

using the wireless remote control ..............................31

Control exercised from the Multi-Function

Controller AW-RP655 ................................................32

Control exercised from the Multi Hybrid

Control Panel AW-RP555 ..........................................34

Control exercised from the Remote

Camera Controller AW-RP50 ....................................36

Setting the camera menu items ......................................37

Setting the camera menu items .....................................37

Top Menu .......................................................................37

Camera screen ..............................................................38

Brightness screen ..........................................................38

Picture 1/3 screen ..........................................................40

Picture 2/3 screen ..........................................................41

Picture 3/3 screen ..........................................................42

Matrix 1/4 screen ...........................................................42

Matrix 2/4 screen ...........................................................43

Matrix 3/4 screen ...........................................................43

Matrix 4/4 screen ...........................................................44

System screen ...............................................................45

Genlock screen ..............................................................45

Output screen ................................................................46

Other 1/3 screen ............................................................48

Other 2/3 screen ............................................................49

Other 3/3 screen ............................................................50

Maintenance screen .......................................................51

Firmware VER 1/2 screen ..............................................51

Firmware VER 2/2 screen ..............................................51

IP Network screen ..........................................................52

Camera menu item table ..................................................53

Web setting screen ...........................................................55

Menu operations ............................................................56

Control screen ................................................................59

Setup screen ..................................................................61

System log displays .........................................................85

Limiters ..............................................................................86

Setting/releasing the limiters ..........................................87

Basic limiter operations ..................................................87

Setting the limiters .........................................................87

Releasing the limiters .....................................................88

Resetting the limiters .....................................................88

Safe mode .........................................................................89

Concerning the safe mode .............................................89

Detection of equipment trouble ......................................89

Cooling fan .....................................................................89

Notes on Windows Vista® / Windows® 7 .........................90

Index ..................................................................................96

4

Before use

 Overview

 This unit is a full HD camera integrated with a pan-tilt

head and featuring a newly developed 1/3-type full HD

3MOS sensor and digital signal processor (DSP).

 In addition to the optical 20 zoom lens, the unit comes

with a 10 digital zoom to achieve vibrant high-quality

images that have a horizontal resolution of 1000 lines.

 By connecting a controller, the camera operations can be

performed smoothly by IP control or serial control.

 By connecting the unit to a personal computer through an

IP network, it is possible to operate the unit from the Web

browser screen.

 There is a choice of color — white in the case of the

AW-HE120W or black in the case of the AW-HE120K — to

suit the intended application and environment.

 Required personal computer

environment

CPU Intel® CoreTM2 DUO 2.4 GHz or faster

recommended

Memory 512 MB or more

(When using Microsoft® Windows Vista®:

1 GB or more, and when using

Microsoft® Windows® 7: 1 GB [32 bits]

or 2 GB [64 bits] or more)

Network

function 10Base-T or 100Base-TX port 1

Image display

function Resolution: 1024  768 pixels or

more

Color generation: True Color 24 bits or

more

Supported

operating

system and

Web browser

Microsoft® Windows® 7 Professional

SP1 64-bit*1

Microsoft® Windows® 7 Professional

SP1 32-bit*1

Windows® Internet Explorer® 8.0*2

Windows® Internet Explorer® 9.0*2

Microsoft® Windows Vista® Business

SP2 32-bit

Windows® Internet Explorer® 7.0

Microsoft® Windows® XP Home Edition

SP3*3

Microsoft® Windows® XP Professional

Edition SP3*3

Microsoft® Internet Explorer® 6.0 SP3

*1: This cannot be used in the

Windows® XP compatibility mode.

*2: This cannot be used with the 64-bit

version of Internet Explorer® 8.0.

*3: The Microsoft® Windows® XP

Professional x64 Edition is not

supported.

Other CD-ROM drive

(for using the Operating Instructions and

various software)

Adobe® Reader®

(for browsing the Operating Instructions

on the CD-ROM)

5

Before use

Before use (continued)

IMPORTANT

 Failure to provide the required personal computer

environment may slow down the delineation of

the images on the screen, make it impossible for

the web browser to work and cause other kinds of

problems.

 When using Microsoft® Windows Vista® or Microsoft®

Windows® 7, refer to the “Notes on Windows Vista® /

Windows® 7” (page 90) for details on the personal computer

environment that is required and on the precautions and

other items.

 Disclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE

TO ANY PARTY OR ANY PERSON, EXCEPT FOR

REPLACEMENT OR REASONABLE MAINTENANCE OF

THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT

LIMITED TO BELOW:

 ANY DAMAGE AND LOSS, INCLUDING WITHOUT

LIMITATION, DIRECT OR INDIRECT, SPECIAL,

CONSEQUENTIAL OR EXEMPLARY, ARISING OUT

OF OR RELATING TO THE PRODUCT;

 PERSONAL INJURY OR ANY DAMAGE CAUSED BY

INAPPROPRIATE USE OR NEGLIGENT OPERATION

OF THE USER;

 UNAUTHORIZED DISASSEMBLE, REPAIR OR

MODIFICATION OF THE PRODUCT BY THE USER;

 INCONVENIENCE OR ANY LOSS ARISING WHEN

IMAGES ARE NOT DISPLAYED, DUE TO ANY

REASON OR CAUSE INCLUDING ANY FAILURE OR

PROBLEM OF THE PRODUCT;

 ANY PROBLEM, CONSEQUENTIAL

INCONVENIENCE, OR LOSS OR DAMAGE, ARISING

OUT OF THE SYSTEM COMBINED BY THE DEVICES

OF THIRD PARTY;

 LOSS OF REGISTERED DATA CAUSED BY ANY

FAILURE.

 Network security

As you will use this unit connected to a network, your

attention is called to the following security risks.

 Leakage or theft of information through this unit

 Use of this unit for illegal operations by persons with

malicious intent

 Interference with or stoppage of this unit by persons

with malicious intent

It is your responsibility to take precautions such as those

described below to protect yourself against the above

network security risks.

 Use this unit in a network secured by a firewall, etc.

 If this unit is connected to a network that includes PCs,

make sure that the system is not infected by computer

viruses or other malicious entities (using a regularly

updated antivirus program, anti-spyware program, etc.).

 Protect your network against unauthorized access by

restricting users to those who log in with an authorized

user name and password.

 Take measures by authenticating the users of the unit in

order to restrict access, for example, so that the setting

information contained inside the unit is not leaked over the

network.

 Do not install the camera in locations where the camera or

the cables can be destroyed or damaged by persons with

malicious intent.

 Refrain from connections that use public lines.

Usage restrictions

Use of the same segment is recommended for the network

in which the unit and the controller or personal computer are

connected.

If the equipment uses connections with different segments,

events based on the settings inherent to the network

equipment, for instance, may occur so check this thoroughly

prior to operation.

6

Basic shooting operations

1 Set the subject brightness to the appropriate

level.

2 Turn on the power of all the units and devices

in the system.

3 Select the unit to be operated.

Even when using only one unit, it must still be selected

from the wireless remote control or controller.

4 Select the shooting mode.

One of four shooting modes (Scene1, Scene2, Scene3

or Scene4) — whichever one will best suit the shooting

conditions — can be selected.

The shooting modes are set by the user.

For details of the factory settings, refer to pages 53 to 54.

Select the mode that satisfies the shooting conditions

and suits your preferences.

When continuing to shoot in the same circumstances,

there is no need to select another mode.

5 Start shooting.

(After shooting, turn off the power of all the

units and devices in the system.)

 Some of the initial settings are auto settings and

cannot be operated manually. To perform manual

operations for these settings, switch the auto

settings to manual settings as necessary.

Note

If the settings have already been changed and the original

settings are to be restored, refer to the “What to do when

encountering problems in the basic shooting operations”

(page 13) and “Camera screen” (page 38) in

“Setting the camera menu items”.

7

Shooting

How to turn the power on and off

 Turning the power on

When performing the operations

using the wireless remote control

1 Set all the power switches of the units and

devices connected in the system to ON.

 This unit does not have a power switch.

When power is supplied to it, the status display lamp

will light up orange, and the unit is set to the standby

mode.

2 Press one of the [CAM1] to [CAM4] buttons on

the wireless remote control to select the unit.

3 Press the [ON/STANDBY] button on the

wireless remote control for 2 seconds.

The POWER ON mode is established, images are

output, and control can be exercised.

 The unit’s status display lamp now lights up green.

 It takes maximum 30 seconds per unit for the initial

settings operation to be completed.

During this period, the unit cannot be operated.

(Status display lamp: light up orange)

 When operation is transferred to the STANDBY

mode: The current zoom, focus and iris positions

are stored in the memory (POWER ON preset).

 When operation is transferred to the POWER ON

mode: The zoom, focus and iris are adjusted to

the positions which were stored in the memory

(POWER ON preset) when operation was

transferred to the STANDBY mode.

Notes

4 If a multiple number of units are going to be

used, repeat steps 2 and 3 as required.

The unit’s status display lamp blinks green when a signal

matched by the remote control ID has been received, and

it blinks orange when a signal that is not matched by the

remote control ID has been received.

When performing the operations using the controller

When the AW-RP655 or AW-RP555 is connected:

1 Set all the power switches of the units and

devices connected in the system to ON.

 This unit does not have a power switch.

When power is supplied to it, the status display lamp

will light up orange, and the unit is set to the standby

mode.

2 Set the [OPERATE] switch on the controller to

ON.

The POWER ON mode is established, images are

output, and control can be exercised.

 The unit’s status display lamp now lights up green.

 It takes maximum 30 seconds per unit for the initial

settings operation to be completed.

During this period, the unit cannot be operated.

(Status display lamp: light up orange)

 When operation is transferred to the STANDBY

mode: The current zoom, focus and iris positions

are stored in the memory (POWER ON preset).

 When operation is transferred to the POWER ON

mode: The zoom, focus and iris are adjusted to

the positions which were stored in the memory

(POWER ON preset) when operation was

transferred to the STANDBY mode.

Notes

Before setting the [OPERATE] switch on the controller to ON,

be absolutely sure to set all the power switches of the units

and devices connected in the system to ON.

For further details, refer to the Operating Instructions of the

controller.

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

8

How to turn the power on and off (continued)

 Turning the power off

When performing the operations

using the wireless remote control

1 Press one of the [CAM1] to [CAM4] buttons on

the wireless remote control to select the unit.

2 Press the [ON/STANDBY] button on the

wireless remote control for 2 seconds.

The unit is set to the standby mode.

 The unit’s status display lamp now lights up orange.

3 If a multiple number of units are going to be

used, repeat steps 1 and 2 as required.

4 Set all the power switches of the units and

devices connected in the system to OFF.

 This unit does not have a power switch.

 When operation is transferred to the STANDBY

mode: The current zoom, focus and iris positions

are stored in the memory (POWER ON preset).

 When operation is transferred to the POWER ON

mode: The zoom, focus and iris are adjusted to

the positions which were stored in the memory

(POWER ON preset) when operation was

transferred to the STANDBY mode.

Notes

When performing the operations using the controller

When the AW-RP655 or AW-RP555 is connected:

1 Set the [OPERATE] switch on the controller to

OFF.

All the cameras (including the unit) connected to the

controller are set to the standby mode.

 The unit’s status display lamp now lights up orange.

2 Set all the power switches of the units and

devices connected in the system to OFF.

 This unit does not have a power switch.

 When operation is transferred to the STANDBY

mode: The current zoom, focus and iris positions

are stored in the memory (POWER ON preset).

 When operation is transferred to the POWER ON

mode: The zoom, focus and iris are adjusted to

the positions which were stored in the memory

(POWER ON preset) when operation was

transferred to the STANDBY mode.

Notes

For further details, refer to the Operating Instructions of the

controller.

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

9

Shooting

Selecting the units

Up to four units can be operated using one wireless remote

control.

Up to five units and devices can be operated using one

controller.

Select the unit (or units) to be operated from the wireless

remote control or controller.

Even when using only one unit, it must still be selected.

When performing the operations

using the wireless remote control

To select the unit using the wireless remote control, the IR ID

switches on the unit’s back panel must be set.

For details of the IR ID switch settings, refer to pages 36 and 39

in the <Basics>.

1 Press the [CAM1], [CAM2], [CAM3] or [CAM4]

button.

The unit’s status display lamp blinks green when a signal

matched by the remote control ID has been received,

and it blinks orange when a signal that is not matched by

the remote control ID has been received.

When performing the operations using the controller

When the AW-RP655 is connected:

1 Press the [1], [2], [3], [4] or [5] button of

[CONTROL/PREVIEW MONITOR OUT SEL].

When the AW-RP555 is connected:

1 Press the [1], [2], [3], [4] or [5] button of

[CONTROL].

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

Selecting the shooting modes (scene files)

 Types of shooting modes

One of four shooting modes (Scene1, Scene2, Scene3

or Scene4) — whichever one will best suit the shooting

conditions — can be selected.

The shooting modes are set by the user.

For details of the factory settings, refer to pages 53 to 54.

Select the mode that satisfies the shooting conditions and

suits your preferences.

The settings can be changed by menu operations.

 The results of the white balance and other adjustments

are stored in the memory separately by shooting mode.

Be absolutely sure to select the shooting mode before

making any adjustments.

 Some of the initial settings are auto settings and

cannot be operated manually. To perform manual

operations for these settings, switch the auto

settings to manual settings as necessary.

Note

Scene1

Scene2

Scene3

Scene4

The settings of your preferences can be established

in line with the shooting scene, lighting and other

conditions.

10

Selecting the shooting modes (scene files) (continued)

 How to select the shooting mode

When performing the operations

using the wireless remote control

2, 8

4, 6, 7

3, 5, 7

1

1 Press the [CAM1], [CAM2], [CAM3] or [CAM4]

button to select the unit.

2 Press the [MENU] button for 2 seconds.

The Top Menu is displayed.

Top Menu

Camera Scene: Scene1

System

Maintenance

3 Press the [] or [] button to bring the cursor

to “Camera”.

4 Press the [] button.

The “Camera” sub-menu is displayed on the monitor.

Camera

Scene Scene1

Brightness

Picture

Matrix

Return

5 Press the [] or [] button to bring the cursor

to “Scene”.

6 Press the [] button.

The shooting mode blinks.

7 Press the [] or [] button to select the

shooting mode (Scene1, Scene2, Scene3 or

Scene4) to be used, and press the [] button to

enter the selection.

8 Press the [MENU] button for 2 seconds.

The camera menu display is exited.

11

Shooting

Selecting the shooting modes (scene files) (continued)

When performing the operations using the controller

When the AW-RP655 is connected:

1 Press one of the [1] to [5] buttons of

[CONTROL/PREVIEW MONITOR OUT SEL] to

select the unit which is to be operated.

2 Press the [MENU] button to set the LCD panel

display to the menu mode.

3 Turn the jog dial (main) until CAMERA SETTING

appears, and press the [OK] button.

CAMERA SETTING

OK Key

4 When the scene selection menu has appeared

on the LCD panel, select the scene to be set,

and press the [OK] button.

SCENE HALOGEN

OK Key

The scene names displayed on the LCD panel correlate

with the scene files of the AW-HE120 as shown below.

AW-RP655 display AW-HE120 scene file

HALOGEN Scene1

FLUORESCENT Scene2

OUTDOOR Scene3

USER Scene4

5 When the following message appears on the

LCD panel, press the [MENU] button twice to

exit the menu mode.

OPEN CAMERA MENU ?

OK Key

When the AW-RP555 is connected:

1 Press the [1], [2], [3], [4] or [5] button of

[CONTROL] to select the unit.

2 Press the [1], [2], [3] or [USER] button of

[SCENE FILE] to select the shooting mode.

Shooting mode [SCENE FILE] button

Scene1 [1]

Scene2 [2]

Scene3 [3]

Scene4 [USER]

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

12

Shooting

When performing the operations

using the wireless remote control

Changing the camera’s direction

Moving the camera toward the left or right (panning):

Press the [] or [] button.

Moving the camera up or down (tilting):

Press the [] or [] button.

Moving the camera diagonally:

Press the [] or [] button and [] or [] button at

the same time.

Returning the camera to the reference position:

Press the [HOME] button for 2 seconds.

Using the zoom function

Zooming in (the subject becomes magnified in size):

Press the [T] button of [ZOOM].

Zooming out (the subject becomes reduced in size):

Press the [W] button of [ZOOM].

Switching the panning/tilting and lens

operation speed

Changing the direction or zoom at high speed:

Press the [FAST] button.

Changing the direction or zoom at low speed:

Press the [SLOW] button.

The speeds at which the pan, tilt, zoom focus and iris are

controlled are now switched.

When performing the operations using the controller

Changing the camera’s direction

Moving the camera toward the left or right (panning):

Tilt the [PAN/TILT] lever toward L or R.

Moving the camera up or down (tilting):

Tilt the [PAN/TILT] lever toward UP or DOWN.

Moving the camera diagonally:

Tilt the [PAN/TILT] lever diagonally.

Returning the camera to the reference position:

If the controller has a [HOME] button, press the

[HOME] button.

Using the zoom function

Zooming in (the subject becomes magnified in size):

Tilt the [ZOOM] lever toward the TELE direction.

Zooming out (the subject becomes reduced in size):

Tilt the [ZOOM] lever toward the WIDE direction.

 The indicator displays of the AW-RP655 are

indicators that show the positions of the optical

zoom. They will not work for electronic zooming.

Note

Switching the panning/tilting and lens

operation speed

AW-RP655 and AW-RP555

1 Press the [SPEED] button.

Each time the [SPEED] button is pressed, the control

speed is switched between the high speed (the button’s

lamp is off) and low speed (the button’s lamp is lit).

The speeds at which the pan, tilt, zoom focus and iris are

controlled are now switched.

AW-RP50

Refer to the Operating Instructions of the controller.

13

Shooting

What to do when encountering problems in the basic shooting operations

If the trouble is not resolved by taking the action suggested

below, refer to “Troubleshooting” (page 42 in the <Basics>).

When performing the operations

using the wireless remote control

The unit does not move.

 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to

select the unit which is to be operated.

If only one unit is being used, it is normally selected using

the [CAM1] button.

 Check that the IR ID switches have been set correctly.

(Refer to pages 36 and 39 in the <Basics>.)

 If the unit’s status display lamp is off or lights up orange, it

means that the unit’s power is not on.

Refer to “Turning the power on” (page 7), and turn on the

power.

 If the unit’s status display lamp does not blink even when

the wireless remote control is operated near the unit’s

wireless remote control signal light-sensing area, it means

that the wireless remote control’s batteries have run down.

Replace the batteries.

Multiple color bands (color bars) are displayed.

Press the [MODE] button to switch to the camera picture.

The menu screen is displayed.

Press the [MENU] button for 2 seconds to exit the camera

menu.

The lens focus is not adjusted automatically.

Press the [A/FOCUS] button to switch to auto focusing.

The camera picture is too light or too dark.

1. Press the [A/IRIS] button to switch automatically to the

lens iris adjustment.

2. Press the [AUTO] button of [GAIN] to switch automatically

to the gain adjustment.

Something is wrong with the coloring of the

camera pictures.

Refer to “Auto tracking white adjustment (ATW)” (page 24), and

switch to “ATW”.

The camera menus are not displayed.

If any of the camera menus are displayed within less than

a minute after the camera was restarted, the menus will be

displayed in all the outputs.

Check “OSD Mix” (page 50) on the camera menu Other 3/3

screen.

When performing the operations using the controller

The unit does not move.

 Select the unit to be operated by following the procedure

below.

When the AW-RP655 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL/

PREVIEW MONITOR OUT SEL].

When the AW-RP555 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL].

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

 If the [OPERATE] lamp on the controller is off, it means

that the power of the controller is not on.

 If the unit’s status display lamp is off or lights up orange, it

means that the unit’s power is not on.

Refer to “Turning the power on” (page 7), and turn on the

power.

Multiple color bands (color bars) are displayed.

Press the [MODE] button to switch to the camera picture.

The menu screen is displayed.

Press the [MENU] button to exit the camera menu.

The lens focus is not adjusted automatically.

Press the [EXT(AF)] button to switch to auto focusing.

The camera picture is too light or too dark.

1. Press the [IRIS] button several times to turn on its lamp,

and switch the lens iris adjustment to auto.

2. Press the [GAIN] button several times to turn on its lamp,

and switch the gain adjustment to auto.

Something is wrong with the coloring of the

camera pictures.

Refer to “Auto tracking white adjustment (ATW)” (page 24), and

switch to “ATW”.

The camera menus are not displayed.

If any of the camera menus are displayed within less than

a minute after the camera was restarted, the menus will be

displayed in all the outputs.

Check “OSD Mix” (page 50) on the camera menu Other 3/3

screen.

14

More advanced operations

Manual shooting (see pages 15 to 18)

 Manual adjustment of focus

 Manual adjustment of iris

 Manual adjustment of shutter speed

 Manual adjustment of gain

Preset memories (see pages 19 to 21)

 Up to 100 settings for the camera direction (panning and

tilting), zoom, focus, iris, gain up and white balance can be

registered in the preset memories, and called.

 The number of settings that can be registered and

called depends on the type of wireless remote control

(12 settings) or controller that is used for operation.

White balance adjustment

(see pages 22 to 24)

 This adjustment is performed to express the white

accurately. Its setting also has an effect on the color tones

of the entire screen.

 It must be performed when using the unit for the first

time or when the unit has not been used for a prolonged

period.

 It must be performed when the lighting conditions or

brightness has changed.

 Once the white balance has been attained, no further

adjustment is required provided that the unit is going to be

used under the same conditions.

Black balance adjustment (see page 25)

 This adjustment is performed to express the black

accurately. Its setting also has an effect on the color tones

of the entire screen.

 It must be performed when using the unit for the first

time or when the unit has not been used for a prolonged

period.

 It must be performed when the ambient temperature has

changed significantly and at the change of the seasons.

 Once the black balance has been attained, no further

adjustment is required provided that the unit is going to be

used under the same conditions.

Black level (master pedestal) adjustment

(see pages 26 to 27)

 This adjustment is performed to align the black level

(pedestal level) of a multiple number of cameras.

 Ask your dealer to perform this adjustment.

Genlock adjustment (see page 28)

 This adjustment is performed to achieve phase alignment

by applying external synchronization (genlock) when a

multiple number of cameras will be used or when the unit

will be used in combination with other devices.

 Ask your dealer to perform this adjustment.

15

Shooting

Manual shooting

 Manually adjusting the focus

The lens focus can be adjusted manually.

When performing the operations

using the wireless remote control

1 Press the [M/FOCUS] button to switch the

focus to manual adjustment.

2 Press the [F] or [N] button of [FOCUS], and

adjust the focus.

When the [F] button is pressed, the focus moves further

away (far); conversely, when the [N] button is pressed, it

moves nearer (near).

The speed of focusing and other adjustments can

be switched to fast or slow by pressing the [FAST] or

[SLOW] button, respectively.

3 If necessary, press the [A/FOCUS] button to

return the focus to the automatic adjustment.

When performing the operations using the controller

When the AW-RP655 is connected:

1 Press the [EXT(AF)] button to switch the focus

to manual adjustment.

2 Adjust the focus manually by turning the dial

above the lit [FOCUS] lamp whether it is the

lamp of the [PAN/TILT] lever or [ZOOM] lever.

Furthermore, every time the [SPEED] button is pressed,

the speed of the focusing and other adjustments can be

switched to fast or slow.

3 If necessary, press the [EXT(AF)] button to

return the focus to the automatic adjustment.

When the AW-RP555 is connected:

1 Press the [EXT(AF)] button to switch the focus

to manual adjustment.

2 Adjust the focus manually by tilting the

[FOCUS] lever.

Furthermore, every time the [SPEED] button is pressed,

the speed of the focusing and other adjustments can be

switched to fast or slow.

3 If necessary, press the [EXT(AF)] button to

return the focus to the automatic adjustment.

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

 When the focus is set to manual, the subject may

go out of focus during panning, tilting and zooming.

Therefore, the unit comes with a function which

compensates for this. (Focus compensation during

zooming function: Focus ADJ With PTZ.)

This function was set to ON at the factory.

If the function has been set to OFF, either adjust the

focus, as required, after zooming or set the focus to

auto. (See page 49 and page 73.)

Note

16

Manual shooting (continued)

 Manually adjusting the iris

The lens iris can be adjusted manually.

When performing the operations

using the wireless remote control

1 Press the [M/IRIS] button to switch the iris to

manual adjustment.

2 Adjust the iris using the [IRIS +] or [IRIS –]

button.

Press the [IRIS +] button to adjust the lens iris in the

opening direction; conversely, press the [IRIS –] button to

adjust the lens iris in the closing direction.

The speed of the iris and other adjustments can be

switched to fast or slow by pressing the [FAST] or

[SLOW] button, respectively.

3 If necessary, press the [A/IRIS] button to return

the iris to the automatic adjustment.

When performing the operations using the controller

When the AW-RP655 is connected:

1 Press the [IRIS] button several times to turn

off the button’s lamp and switch to manual

adjustment.

2 Adjust the iris manually by turning the dial

above the lit [IRIS] lamp whether it is the lamp

of the [PAN/TILT] lever or [ZOOM] lever.

3 If necessary, press the [IRIS] button several

times and turn on its lamp to return the iris to

the automatic adjustment.

When the AW-RP555 is connected:

1 Press the [IRIS] button to turn off its lamp and

switch to manual adjustment.

2 Turn the [LEVEL] dial of [IRIS] to adjust the iris

manually.

The position of the [LEVEL] dial does not represent an

absolute value.

This is why the brightness may differ from one camera to

another even when the dial is set to the same position.

3 If necessary, press the [IRIS] button to turn on

its lamp and switch to automatic adjustment in

order to return the iris to automatic adjustment.

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

17

Shooting

Manual shooting (continued)

 Manually adjusting the shutter speed

The shutter speed can be set using two methods. One is

a method that specifies the time (where a time such as

1/250 sec. is designated), and the other is a method that

specifies the frequency (where synchro scan, 60.17 Hz, etc.

is designated).

When shooting a TV screen or PC monitor screen, the

horizontal noise generated when the screen is shot can

be minimized by adjusting the frequency to the screen

frequency using synchro scan.

When performing the operations

using the wireless remote control

Perform the adjustments on the Camera menu.

For further details, refer to the [Shutter Mode] on page 38 and

[Step/Synchro] items on page 39.

When performing the operations using the controller

The procedure is the same as for “When performing the

operations using the wireless remote control” in “Basic

operations” (pages 29 to 36).

When the AW-RP555 is connected:

1 Press the [SHUTTER] button and turn its lamp

on.

The shutter speed set ahead of time is selected.

2 If necessary, press the [SHUTTER] button and

turn its lamp off in order to return the shutter to

the OFF setting.

 How to set the shutter speed using the AW-RP555

1 With the [MEMORY] button still held down,

press the [SHUTTER] button.

The [PRESET] [1] to [5] and [6] to [10] buttons blink

alternately.

2 Press one of the [1] to [8] buttons or the

[10] [PRESET] button — whichever button

corresponds to the shutter speed which is to

be set.

Any of the shutter speeds in the table below can be set.

[When 59.94 Hz has been set as the unit’s frequency]

OFF 1/59.94 [6] 1/4000

[1] 1/100 [7] 1/10000

[2] 1/250 [8] Synchro Scan

[3] 1/500 [9] ELC

[4] 1/1000 [10] OFF

[5] 1/2000

[When 50 Hz has been set as the unit’s frequency]

OFF 1/50 [6] 1/4000

[1] 1/120 [7] 1/10000

[2] 1/250 [8] Synchro Scan

[3] 1/500 [9] ELC

[4] 1/1000 [10] OFF

[5] 1/2000

 Any change in the shutter speed is reflected the next

time the [SHUTTER] button is pressed and its lamp is

turned on.

 When OFF is selected, the shutter will not operate

even when the [SHUTTER] button is pressed.

 Select the synchro scan setting on the menu.

 The shutter speed setting performed here is stored in

the memory even when the power of the AW-RP555

is turned off.

For further details, refer to the Operating Instructions of the

AW-RP555.

18

Manual shooting (continued)

 Manually adjusting the gain

There are two ways to adjust the gain. One way involves

using the buttons on the wireless remote control or controller;

the other way involves using the Camera menu or Web

setting.

The gain can be adjusted more precisely using the Camera

menu or Web setting.

For further details, refer to the [Gain] item on page 39 and

page 64.

 When adjusting the gain, the light quantity may

change suddenly (causing the image output to be

subjected to a shock).

Note

When performing the operations

using the wireless remote control

1 Press the [OFF], [LOW] or [HI] button.

These buttons enable the gain increase to be selected in

three steps.

[LOW] is used to select 9 dB; [HI] is used to select 18 dB.

2 If necessary, press the [AUTO] button in order

to return the gain to the automatic adjustment

(AGC).

When performing the operations using the controller

When the AW-RP655 is connected:

1 Press the [GAIN] button to turn off its lamp, and

then switch to manual adjustment.

The preset gain increase amount is now selected.

For further details on the gain increase amount setting,

refer to the Operating Instructions of the AW-RP655.

2 If necessary, press the [GAIN] button and turn

on its lamp in order to return the gain to the

automatic adjustment (AGC).

When the AW-RP555 is connected:

1 Press the [GAIN] button to turn off its lamp.

Each time this button is pressed, one of the three gain

increase amounts can be selected in sequence.

The current status is displayed as follows.

[MANU]

[L] lamp [MANU]

[H] lamp [GAIN]

button

0 dB Off Off Off

LOW Lit Off Off

HIGH Off Lit Off

AUTO Off Off Lit

Other Lit Lit Off

2 If necessary, press the [GAIN] button several

times and turn on its lamp in order to return the

gain to the automatic adjustment (AGC).

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

In any case, the maximum gain of the automatic adjustment

can be set by the camera menu or Web setting.

For further details, refer to the [AGC Max Gain] item on

page 39 and page 64.

19

Adjustment

Preset memories

This unit enables up to 100 settings for the camera direction

(panning and tilting), zoom, focus, iris, gain and white

balance to be registered in its preset memories, and called.

However, the number of settings that can be registered and

called depends on the type of wireless remote control or

controller that is used for operation.

 The focus and iris operating modes (manual and auto

settings) are neither registered nor recalled.

The current focus and iris values are registered.

 The focus and iris values can be recalled only when the

manual settings are applicable.

 For the white balance, the current White Balance Mode

adjustment values are registered. If a preset value

is recalled when AWB A or AWB B is selected, the

adjustment value selected when it was registered as a

preset will be recalled.

 The White Balance Mode (ATW, AWB A or AWB B)

stored using the AW-RP655 are recalled only when the

AW-RP655 is connected.

 When there is a large difference in the environmental

temperature between the time of registration and the

time the setting is called, displacement of the preset

position may occur.

 If displacement occurs, perform registration again.

 When a manual operation is performed for pan, tilt,

zoom, focus or iris during preset recall, the preset

operation for the pan, tilt, zoom, focus or iris operation

concerned will be aborted.

 If another preset has been recalled during an ongoing

preset recall, the preset being recalled is aborted,

and operation for the preset called last is performed

instead.

Notes

When performing the operations

using the wireless remote control

Twelve settings (preset No.1 to No.12) can be registered and

called using the wireless remote control.

The [1] to [12] buttons correspond to the unit’s preset

memories No.1 to No.12.

 Registering the settings in the preset memories

1 Display the picture to be shot on the monitor.

Operate the pan, tilt or zoom buttons to determine the

camera angle.

Adjust the focus, iris, gain and white balance if they need

to be adjusted.

2 While holding down the [PRESET] button, press

the button corresponding to the preset memory

number.

 If a preset memory number with an already registered

setting has been selected, the existing setting will be

erased and replaced with the new one.

 Calling the settings of the preset memories

1 Press the button in which the preset memory

setting has been registered.

20

Preset memories (continued)

When performing the operations using the controller

When the AW-RP655 is connected:

Up to 50 settings can be registered and called.

The [1] to [50] buttons of [TRACING/PRESET MEMORY]

correspond to the unit’s preset memories No.1 to No.50.

 Registering the settings in the preset memories

1 Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2 Set to the memory recording mode.

Press the [M.LOCK] button to turn off its lamp.

3 Display the picture to be shot on the monitor.

Operate the [PAN/TILT] lever and [ZOOM] lever to

determine the camera angle.

Adjust the focus, iris, gain and white balance if they need

to be adjusted.

4 Hold down the [MEMORY] button.

The buttons among the [1] to [50] buttons of [TRACING/

PRESET MEMORY] in which settings can be registered

now start blinking in sequence.

 Preset memory settings cannot be registered in

buttons whose lamps are off (since they contain

tracing memory settings).

5 With the [MEMORY] button still held down,

press the button of the preset memory number

in which the setting is to be registered.

 Calling the settings of the preset memories

1 Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2 Press the button among the [1] to [50] buttons

of [TRACING/PRESET MEMORY] in which the

desired setting was registered.

 Erasing preset memory settings

1 Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2 Set the memory recording mode.

Press the [M.LOCK] button to turn off its lamp.

3 Hold down the [RESET] button.

The buttons among the [1] to [50] buttons of [TRACING/

PRESET MEMORY] whose settings can be erased now

start blinking in sequence.

 The settings for the buttons whose lamps are off

cannot be erased (since they contain tracing memory

settings).

4 With the [RESET] button still held down, press

the button of the preset memory number whose

setting is to be erased.

Page is loading ...

Panasonic 999-6120-000K User manual

Panasonic 999-6120-000K User manual

Related papers

Other documents