MIXX F1 User guide

Type
User guide

This manual is also suitable for

FITNESS TRACKER
F1
Colour Fitness
Tracker
HOW TO GUIDE
LET’S CHECK
What’s in the box?
MIXX F1 Fitness Tracker
Touch Button
USB Charger
Watch module
Watch Strap
1
2
3
LET’S DOWNLOAD THE APP
The SMART-TIME App supports iOS 11.0 or later,
Android 5.0 or later as well as Bluetooth 4.0.
1. Turn on your Bluetooth on your mobile
smartphone, tablet or computer.
2. Download and install the SMART-TIME App
on to your smartphone.
The App can be download from:
3. After installing the App, follow the on-screen instructions
to sign up for an account.
Creating an account enables you to transfer (or synchronize)
data back and forth from your mobile device and the F1
Fitness Tracker. Use the App to set up and analyse your goals,
view historical trends and so much more.
4. Continue to follow the onscreen instructions to connect
or pair your F1 Fitness Tracker to your mobile device. When
pairing, make sure that Bluetooth is turned on so that the
watch and mobile device can communicate with each other
i.e., sync their data. Note: the F1 Fitness Tracker will be called
‘B3C’ in the app.
LET’S CONNECT THE F1 FITNESS
TRACKER WITH YOUR DEVICE
1. Open the SMART-TIME App on your phone, select ‘Device’
and then choose ‘Add Device’.
IMPORTANT! DO NOT PAIR WITH THE FITNESS TRACKER
IN YOUR BLUEOOTH SETTINGS - if you have already done
this, please go to your Bluetooth settings and choose ‘unpair’
or ‘forget’ the connection to your F1 Fitness Tracker. It is
important to pair with the F1 Tracker through the SMART-
TIME App otherwise you may not be able to synchronise your
data with the Tracker.
2. Select ‘B3C’ from the Bluetooth
list on the App. The watch will
show a paring notification. Click to
confirm pairing – you will then see
the Bluetooth icon on the top right
of the watch or in the quick setting
page (slide down page) turns to
Blue, then Bluetooth is connected.
3. Tap the touch button on the watch
to accept pairing with your phone
Note: To install the Smart-Time App, you need to be using Android 5.0 or iOS
11.0 or above. The watch can only be paired with one mobile phone. To pair
other mobile phones, please unbind the current phone before pairing.
1
LET’S STAY CHARGED
It takes around 2 hours to fully charge the F1 Fitness Tracker.
When fully charged the display will show a full battery . To
charge the Tracker, push the module through the strap
from behind at the touch button end, and then remove the
module from the strap . The module has a built
in USB connector which you can plug into a computer or wall
charger to charge it. For most laptop computers the module
will plug in screen down:
2
2
2
3
3
Touch Button
USB Connector
1
2
3Strap
1
LET’S PLAY
Adjust the watchstrap so that it is a snug fit (not too tight or
loose) on your wrist and where there is no green light coming
through from the LED light under the body or back of the watch.
The touch button can be used to scroll through the
on-screen options (short press) and to select an option
(long press). The functions that can be used are:
1
1. STEPS
Shows your daily step count. Long press the touch button
to show total distance and calories burned:
1
2. HEART RATE
Long press the touch button to start/stop measuring heart rate
1
3. BLOOD PRESSURE
Long press the touch button to start / stop measuring
1
4. SPORTS
The F1 Fitness Tracker supports running and cycling modes.
Long press the touch button to enter Sports mode.
A. RUN:
Long press the touch button to start: Note – if enabled in the
APP, the Fitness Tracker can connect with your phone’s GPS to
record your location information during your workout allowing a
more accurate calculation of distance.
During your workout, short press the touch button to scroll
through the available statistics for your workout:
At the end of your workout long press the touch button to
finish, then long press the touch button to exit sports mode.
1
1
1
1
1
A. CYCLE:
Long press the touch button to start: Note – if enabled in the
APP, the Fitness Tracker can connect with your phone’s GPS to
record your location information during your workout allowing a
more accurate calculation of distance.
During your workout, short press the touch button to scroll
through the available statistics for your workout:
At the end of your workout, long press the touch button
to finish, then long press to exit Sports mode.
1
1
1
5. WEATHER
Long press the touch button to enter the weather mode
weather is synchronised from your phone. Short press the touch
button to scroll through the weather pages:
1
1
1
G. MORE (SETTINGS)
Long press the touch button to select MORE (Settings)
pages – here you can adjust the Dial face, Find my phone
(sounds an alarm on your phone), Power off the F1 Fitness
Tracker, Factory Reset and view firmware information.
NEED EXTRA HELP? Q&A
Q. My heart-rate signal seems to be missing?
A. If your F1 Fitness Tracker is not showing a heart rate rating
then the data will appear as a dotted line.
Please confirm if you are wearing the watch correctly and that
the strap is not too loose or too tight. The watch strap should
ideally sit back one finger width from your wrist. Not too high
and not too low on your wrist or arm. After adjusting the watch
please do the following:
‘Tap’ the heart rate icon on the F1 to obtain
a manual reading
Check the heart rate monitor feature is turned on in the
Smart-Time App.
Q. I’m having trouble pairing my F1 Fitness Tracker
with my smartphone?
A. Try the following solutions:
Check the F1 is not paired with another mobile device.
Please unbind it from the App to unpair or forget the watch.
Go to LET’S CONNECT THE F1 SMARTWATCH WITH YOUR
DEVICE section and follow the steps.
IOS device users should go to their Bluetooth settings,
unpair or forget this device and pair it again.
EXEMPTION CLAUSE
1. The Heart rate, Blood pressure and Body temperature
data output or results by F1 are not intended to be used on a
medical or diagnostic basis.
2. Self-diagnosis and self-treatment are dangerous. Only
qualified doctors are allowed to diagnose and treat high blood
pressure or any other heart diseases. Please contact your
doctor for professional diagnostic opinions and help.
3. The data and information of heart rate and blood pressure
provided by F1 may not be completely accurate and may
exceed the tolerance as per the specification stated in the
manual due to many factors, such as interference of the signal
from external sources, incorrect wearing position and changes
in weather conditions or user’s body condition.
4. DO NOT adjust any of your medication or therapeutic
schedule based on the results output by F1. Please follow
the doctor’s instructions before taking any treatment or
medication.
The manufacturer disclaims all liability arising from
such inaccuracy and assumes no responsibility for the
consequences of use of such data and information.
WBF1HTG01
mixxwatch.com
@
MIXX Limited
5 The Pavilions, Brighton Road, Pease Pottage,
West Sussex, RH11 9BJ. United Kingdom
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

MIXX F1 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI