Wren EG12 Product information

Category
Security camera accessories
Type
Product information

This manual is also suitable for

wrensolutions.com (800) 881-2249 solutions@wrensolutions.com
P R O D U C T I N F O R M AT I O N
The Wren Environmental Globe is designed for outdoor applications and
comes standard with a wall mount integrated into the unit. Installation of the
EG12 couldn’t be simpler—attach the housing to the wall, then attach the camera
plate to the housing—it’s that simple. The EG12 features a dual shell for added
protection from the elements, creating a built-in sunshield. The outer shell is
constructed of UV-resistant, ABS material. The unit is designed to minimize any
dust or insect intrusion with a sealed lip on the dome, reducing profit-shrinking
service calls to clean the housing.
Internally, the EG12 provides a very practical environment. The camera plate
has a quick release mechanism to enable easy removal for servicing the cameras
and optional heater/blower kit (mounted above). The multiple camera mount
accommodates up to three cameras at varying heights and positioning. (Check
with the factory for maximum available camera and lens length.) With the
heater/blower kit, the EG12 features a thermostatically controlled heater. Several
optional mounting accessories allow for a variety of installations.
The EG12 is the perfect match of functionality and appearance for any outdoor
housing installation. One try and we’re sure you’ll be hooked.
F E AT U R E S
12 Outdoor Domed Housing
Simple, time-saving
installation
Attractive, side-mount
appearance
Heater/Blower kit available
Dual shell construction
Multiple camera mount
included
H I G H L I G H T S
1) The EG12 is simple to mount with the
keyhole slots of the mounting bracket.
2) A quick release mechanism allows for
easy removal of the camera plate.
3) Double wall construction helps to
regulate internal temperature while
sealed lip minimizes dust and debris
infiltration.
4) Easily adjust camera position by hand
Multiple camera mount accommodates
up to three cameras (as pictured).
O U T D O O R H O U S I N G S
EG12
E N V I R O N M E N TA L G LO B E
T E C H N I C A L S P E C I F I CAT I O N S
Wren®, the Wren logo, The Power to See Your Business, Wren IP Solutions, No Tools Required and Solution Set Series are trademarks of Wren. The trademarks that are
followed by ® are registered trademarks in the U.S. All other trademarks and/or registered trademarks mentioned herein are properties of their respective owners and are
used for reference purposes only. The use of these trademarks does not indicate any affiliation with or sponsorship of or by Wren. ©2007 Wren. All rights reserved.
Wren, 124 Wren Parkway, Jefferson City, MO 65109 USA
telephone (573) 893-2249 toll-free (800) 881-2249 facsimile (877) 893-2317
solutions@wrensolutions.com wrensolutions.com
8L107 Rev-C (02/22/07)
Doc MD 7.2.210.01
U N I T W E I G H T (with shipping weight in parentheses)
Multiple camera mount
Basic unit 7 lbs (13 lbs)
Unit with heater/blower kit 7 lbs (13 lbs)
E L E C T R I C A L P R O P E R T I E S
Input Voltage 24 VAC
Power Requirements 1 heater, blower = 1.8 amps (camera not included)
Blower 51 CFM @ 2.4 watts (continuous operation)
Heaters One (1) 40 watt heater
Power cable 18 AWG (not supplied)
O P T I O N A L A C C E S S O R I E S
HM1202 Pole mount adapter
HM1302 Corner mount adapter
HM1722 Parapet mount
E N V I R O N M E N T
Outdoor
Operating Temperature 30°F to 100°F without heater/blower kit
EG12-HB: -20°F to 120°F (one 40 watt heater with blower)
C E R T I F I C AT I O N S
Designed to meet NEMA-4 guidelines with proper installation
D I M E N S I O N S
( All Dimensions Are in Inches )
O U T D O O R H O U S I N G S
EG12
E N V I R O N M E N TA L G LO B E
BASIC UNIT WEIGHT = 7 LBS
13.625
12.0
5.0
7.0
7.5
  • Page 1 1
  • Page 2 2

Wren EG12 Product information

Category
Security camera accessories
Type
Product information
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI