Wren EG8-HB Product information

Category
Security camera accessories
Type
Product information
wrensolutions.com (800) 881-2249 solutions@wrensolutions.com
P R O D U C T I N F O R M AT I O N
The Wren Environmental Globe (EG8) is an attractive, durable solution for out-
door applications. Made from the highest quality materials, the EG8 is easy to
install and maintain. It is an ideal solution for situations where reliability and
aesthetics are important such as retail, property management, commercial and
industrial facilities.
The EG8 has many features for protection from the elements, such as a dual shell
that creates a built-in sunshield. The outer shell is constructed of UV-resistant, ABS
material. The unit is designed to minimize any dust or insect intrusion with a sealed
lip on the dome, minimizing costly service calls to clean the housing. An optional
heater/blower kit extends the EG8’s range to -20°F and has a thermostatically
controlled heater.
The EG8 comes standard with a pendant mount integrated into the unit, and instal
-
lation is easy by simply attaching the housing to a 1½
pipe (not included). Designed
to fit into virtually any installation, the EG8 has multiple mounting options, such as
wall, corner, pole and parapet.
The inside of the unit is practical and flexible, accommodating single, fixed and PTZ
cameras. All single, fixed camera models come standard with a liner. All options
come with simple mounts for easy positioning.
The EG8 is the perfect match of functionality and appearance for any outdoor
housing installation.
F E AT U R E S
8 Outdoor Domed Housing
Simple, time-saving
installation
Heater/Blower kit available
Dual shell construction
Independently certified to
IP66 requirements
Designed to meet NEMA-4
guidelines
Many mounting options
O U T D O O R H O U S I N G S
EG8
E NV IR O N M E NTA L G LO B E
H I G H L I G H T S
1) Mounting is simple by threading
onto 1½
pipe.
2) Easily remove camera plate for
servicing of cameras and optional
heater blower kit. (Plate shown
with one blower.)
3) Double wall construction helps to
regulate internal temperature
while sealed lip minimizes dust
and debris infiltration.
T E C H N I C A L S P E C I F I CAT I O N S
Wren®, the Wren logo, The Power to See Your Business, Wren IP Solutions, No Tools Required and Solution Set Series are trademarks of Wren. The trademarks that are
followed by ® are registered trademarks in the U.S. All other trademarks and/or registered trademarks mentioned herein are properties of their respective owners and are
used for reference purposes only. The use of these trademarks does not indicate any affiliation with or sponsorship of or by Wren. ©2007 Wren. All rights reserved.
Wren, 124 Wren Parkway, Jefferson City, MO 65109 USA
telephone (573) 893-2249 toll-free (800) 881-2249 facsimile (877) 893-2317
solutions@wrensolutions.com wrensolutions.com
8L103 Rev-E (02/22/07)
Doc MD 7.2.210.16
E L E C T R I C A L P R O P E R T I E S
Input Voltage 24 VAC +/- 10%
Power Requirements 1 heater, blower = 1.8 amps (camera not included)
Blower 4.7 CFM @ 2.2 watts
Heater One (1) 40 watt heater
O P T I O N A L A C C E S S O R I E S
HM1102 Curved wall mount
HM1202 Pole mount
HM1302 Corner mount
HM1722 Roof (parapet) mount
(Contact Wren Technical Support for more information about Optional Accessories
compatibility.)
E N V I R O N M E N T
Outdoor
Operating Temperature 30°F to 100°F without heater/blower kit
EG8-HB: -20°F to 120°F
(one 40 watt heater with blower)
C E R T I F I C AT I O N S
Designed to meet NEMA-4 guidelines and independently certified to IP66 requirements
with proper installation
D I M E N S I O N S
( All Dimensions Are in Inches )
O U T D O O R H O U S I N G S
EG8
E N V I R O N M E N TA L G LO B E
BASIC UNIT WEIGHT = 6 LBS
UNIT WITH HEATER/BLOWER
WEIGHT = 6 LBS
10.7
8.
0
8.
2
3.
7
2.
3
  • Page 1 1
  • Page 2 2

Wren EG8-HB Product information

Category
Security camera accessories
Type
Product information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI