Golden Lighting 6070-BA1 BLK-AB Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 6070-BA1 BLK-AB Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
For Customer Service, please
contact the place of purchase.
AssemblyInstructions:6070-BA3 (Tribeca)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the
important notes above. Shut off the power at the
circuit breaker and completely remove the old xture
from the wall, including the old mounting strap.
1.Mountingstrap(B)maybeattachedtobackplate
(F).Ifso,unscrewbackplatescrews(A)andplacethe
screwstothesideforfutureuse.Findthepairofholes
onmountingstrap(B)thatmatchesthespacingofthe
holesonthejunctionboxandthexture’sbackplate(F).
2.Themountingstraphaskeyholesthatneedtobe
positionedlevelatthetopandbottominorderforthe
xturetohangstraight.Lineuptheholesinbackplate
(F)withtheholesinmountingstrap(B)totestbefore
insertingmountingscrews(D)throughmountingstrap
(B)tosecuremountingstrap(B)tothejunctionbox.
CONNECTING THE WIRES
5.Haveanassistantsupporttheweightofthextureduringthewiringprocess.Attachthexture’swirestothepowersupplywiresfrom
thejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(orribbed);groundtoground(greenorcopper).Twisttheendsof
thewirepairstogether,thentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisnogroundwire(greenor
copper)fromthejunctionbox,locategroundscrew(E)onmountingstrap(B)andwrapthexture’sgroundwirearoundthegreenground
screw(E).Useascrewdrivertosecuregroundscrew(E)ontothemountingbracket.Tuckallwiresneatlyintothejunctionbox.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
3.Pullthehousewiresthroughthecenterofmounting
strap(B).Tightenmountingscrews(D)securely.
4.Attachaccents(G)tobackplate(F)byusingwashers
(H)followedbyscrews(C).
Front View
Side View
G
N
D
A
B
CD
E
F
G
H
J
K
L
I
FINISHING THE INSTALLATION
6.Placethexture’sbackplate(F)overmountingstrap(B)sothattheholesinthetopandbottomofbackplate(F)matchupwiththe
holesinthekeytabsatthetopandbottomofmountingstrap(B).Threadbackplatescrews(A)intotheholestosecurebackplate(F)to
mountingstrap(B).Screwuntilthebackplateofthextureissnugagainstthewall,butbecarefulnottoscratchthexture.
7.Carefullyslideglassshades(K)oversockets(J)andsecureinplacewithsocketrings(L).
8.Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattagein
thespecications.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
/