2. Unbranded
  3. 6 Shelf Wire Shelving Unit NSF Garage Storage Shelves Large Heavy Duty Metal Shelf Organizer Height Adjustable Commercial Grade Steel Rack 2100 LBS Capacity

Unbranded 6 Shelf Wire Shelving Unit NSF Garage Storage Shelves Large Heavy Duty Metal Shelf Organizer Height Adjustable Commercial Grade Steel Rack 2100 LBS Capacity, Wire Shelving Unit, WS-776-Black User manual

  • Hello! I am an AI chatbot trained to assist you with the Unbranded 6 Shelf Wire Shelving Unit NSF Garage Storage Shelves Large Heavy Duty Metal Shelf Organizer Height Adjustable Commercial Grade Steel Rack 2100 LBS Capacity User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
4. Turn assembly upright and push
tapered locks (B). Note: Make sure
the lip of shelf (A) is facing down
and the levelers (F) on bottom
5. Repeat steps 2-4 for the second
shelf (A).
6. Screw top pole (C) onto bottom
pole (D). Hand tighten.
7-1 . Repeat steps 2-4 for the remaining
shelves (A).
Refer to image 7-1 for the
assembled unit of stationary option.
ASSEMBLY INSTRUCTIONS
1. Stationary Option: Screw each
feet leveler (F) into the bottom of
each bottom pole (D). Turn clock-
wise to screw in place.
Mobile Option: Screw each wheel
(E) into the bottom of each bottom
pole (D). Turn clock-wise to screw
in place.
3. Rest shelf (A) on its side, then
insert the bottom poles (D) through
the corner holes of the shelf (A).
1
B
3
D
D
D
7-1
4
5
6
C
PACKAGE CONTENTS
Shelf
x 6
B
x 48 +2 extra
Tapered Lock
Feet Leveler
(for stationary option)
F
x 4
6-TIER WIRE SHELVING RACK
A
D
x 4 Bottom Pole (with feet leveler preassembled)
x 4 Top Pole (with pole cap and pole connector preassembled)
C
E
Wheel
(2 locking, 2 non-locking)
(for mobile option)
x 4
2. With the tapered end facing up,
snap the two halves of a tapered
lock (B) at the desired height on
bottom pole (D). Repeat for the
remaining bottom poles (D),
making sure the tapered locks (B)
are installed at the same grooved
line on each bottom pole (D).
2
B
D
MOBILE
STATIONARY
E
F
D
D
B
D
D
D
D
D
A
7-2
7-2 . Repeat steps 2-4 for the remaining
shelves (A).
Refer to image 7-2 for the
assembled unit of mobile option.
http://www.factorydirectwholesales.com
Warning:
Maximum weight capacity per shelf
is 220lbs when equally distributed on
feet levelers.
Maximum entire unit weight capacity
is 500lbs when equally distributed on
casters.
Failure to follow these instructions may
result in serious injury or death of
yourself and people around you.
Some of the part are heavy and/or has
shape edge, please install it carefully to
avoid hurt you and people around you.
Caution:
Do not stand on or climb on the
shelving unit.
Place heavier items on lower shelves
and lighter ones on top shelves.
WS-776
C
C
C
C
/