ASSEMBLY INSTRUCTIONS
PACKAGE CONTENTS
B
EF
AD
C
G
http://www.factorydirectwholesales.com
Warning:
Maximum weight capacity per short
shelf is 10lbs, when weight equally
distributed.
Maximum weight capacity per long
shelf is 10lbs, when weight equally
distributed.
Maximum weight capacity per hanging
bar is 20lbs,when weight equally
distributed.
Maximum entire unit weight capacity
is 110lbs, when weight equally
distributed.
Failure to follow these instructions may
result in serious injury or death of
yourself and people around you.
Some of the part are heavy and/or has
shape edge, please install it carefully to
avoid hurt you and people around you.
Caution:
Do not stand on or climb on the
shelving unit.
Place heavier items on lower shelves
and lighter ones on top shelves.
Double Rod Standing Closet
x10
End connector
x3
End connector
(With round sticker pasted)
x2
Long Shelf
x5
Short Shelf
x4
Long Vertical Pole
x16
Short Vertical Pole
x2
Hanging rod
E
EE
E
AD
DD
D
B
B
A
AA
A
A
AA
G
G
F
F
A
F
F
F
F
F
F
F
A
A
C
C
D
B
1Start by assembling the
bottom sections. Insert parts
(C) and (D) into parts (A)
and (B) as shown.
2Building up from the assembled
bottom section, insert poles
(E) and (F) into end connector
(A) and (B). And insert parts
(D) into parts (A) and (A).
Then place them onto the
top of poles (F).
3Insert short vertical poles
(F) into end connector (A).
And insert parts (D) into
parts (A) and (B). Next place
the assembled section onto
the top of poles (F). Then
place one hanging rod (G)
between middle end
connectors (A) and (B).
4Insert vertical pole (E) and (F)
into (A) and (B), hand tighten.
And insert parts (D) into parts
(A). Then place the assembled
section onto the top of (F).
5Insert short vertical pole (F) into the corner holes of (A).
6Repeat step 1 to assemble the top section, then insert another
hanging rod (G) into the assembled top section.
7Place the assembled top section onto the top of the vertical pole
(E) and (F). Assembly is now complete.
WS-G4568-Silver
/
