Golden Lighting 8401-WSC SB-NVY Operating instructions

Type
Operating instructions
Assembly Instructions: 8401-WSC (Leighton)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromthewall,includingtheold
mounting strap.
1. Take mounting strap (B) from the parts bag. Mounting strap (B) contains several pairs of threaded holes. Find the pair of holes that
matchesthespacingoftheholesonthejunctionboxandyourxture’sbackplate.
2.Pullthehousewiresthroughthecenterofmountingstrap(B),andplacemountingstrap(B)overthejunctionboxsothatmounting
screws(A)arehorizontal,andinalignmentwiththeholelocationsonbackplate(G).
3.Securemountingstrap(B)tothejunctionboxwithmountingscrews(C)andascrewdriver.Tightenthescrewssecurely.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down
the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
G
N
D
J
K
I
E
C
B
D
F
A
G
H
L
CONNECTING THE WIRES
4.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Cutawaytheexcesswires.Refertothewiringdiagram
andattachthexture’swirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundto
Ground.Twisttheendsofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.
Ifthereisnohousegroundwirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrapand
wrapthexture’sgroundwirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewiresand
intothemountingbracket/mountingstrap.Tuckthewiresintothejunctionbox.
FINISHING THE INSTALLATION
5.Placexturebackplate(G)overmountingscrews(A)ofmountingstrap(B).
6.Securebackplate(G)tomountngstrap(B)bythreadingdeconuts(F)ontotheexposedthreadsofmountingscrews(A).
7.Placedecorativespacers(J)overposts(L)andthreaddecorativescrews(K)intoposts(L).
8.Installalightbulb(notprovided)inaccordancewiththexture’sspecications.
9.Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
  • Page 1 1

Golden Lighting 8401-WSC SB-NVY Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI