Active Ventilation RBSF-8-WD Installation guide

Brand
Active Ventilation
Model
RBSF-8-WD
Type
Installation guide
1. Included in box (1) Round back Solar Fan (RBSF)
Top
5 watt
solar panel
only remove bottom shingle
Underside
3. Apply roofing grade sealant, silcone or tar on the underside
of flange.
sealant around perimeter
2. Before installing ( RBSF ), decide location to place opening.
Mark and cut opening *(cut at least two rows down from top
of shingle roof). Remove shingle
Active Ventilation Products, Inc.
311 First Street, Newburgh, NY 12550-4857
800-ROOF VENT (766-3836) Ph: 845-565-7770 Fax: 845-562-8963
Website: roofvents.com Email: sales@roofvents.com
Installation Instructions: RBSF- Shingle Roof
4. Place RBSF above opening by sliding flange in place
underneath shingle. Using a #8 or #10 screw(or nails) should
be placed approximately a distance of 4 inch on center
on all 4 sides.
top half of flange should be
secured underneath shingles
screws should be @ 4" on
center on all 4 sides
  • Page 1 1

Active Ventilation RBSF-8-WD Installation guide

Brand
Active Ventilation
Model
RBSF-8-WD
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents