2. Active Ventilation Products
  3. VPC-7-BL
VPC-7-BL

Active Ventilation Products VPC-7-BL, VPC-7, VPC-7-WT User manual

  • Hello! I've reviewed the installation instructions for the Vent Pipe Cap VPC-7. This document outlines how to correctly install the vent pipe cap using self-tapping screws. It also details product dimensions. I'm ready to answer any questions you have.
  • What is the model number of the vent pipe cap?
    How many screws are needed for installation?
    What type of screw is recommended for installation?
3 1/8"
[7.94 cm]
5"
[12.70 cm]
1 1/4"
[3.18 cm]
10 1/4"
[26.03 cm]
7 1/4"
[18.41 cm]
Flashing Detail & InstructionsFlashing Detail & Instructions
Exhaust Pipe
FastenerFastener
Active Ventilation Products, Inc.
Website: roofvents.com Email: [email protected]
Installation Instructions
Vent Pipe Cap Model: VPC-7 Diameter: 7"
3/24/2022
1. Slide the Vent Pipe Cap over the existing pipe.
2. Observe the screws located on top of the vent. Use this
as a pattern to attach the vent to the pipe.
3. To secure the vent, attach the vent to the pipe using a
#8 self-tapping sheet metal screw.
4. Total number of screws needed = 3
5. Recommended installation screw:
#8 x 1/2" Sheet Metal Screw
6. Screws not included.
* All Aluminum Construction, Thickness = 0.025" [0.635 mm]
/