2. Active Ventilation
  3. RBSF-8

Active Ventilation RBSF-8 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Active Ventilation RBSF-8 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Included in box (1) Round back Solar Fan (RBSF)
Top
5 watt
solar panel
only remove bottom shingle
Underside
3. Apply roofing grade sealant, silcone or tar on the underside
of flange.
sealant around perimeter
2. Before installing ( RBSF ), decide location to place opening.
Mark and cut opening *(cut at least two rows down from top
of shingle roof). Remove shingle
Active Ventilation Products, Inc.
311 First Street, Newburgh, NY 12550-4857
800-ROOF VENT (766-3836) Ph: 845-565-7770 Fax: 845-562-8963
Website: roofvents.com Email: sales@roofvents.com
Installation Instructions: RBSF- Shingle Roof
4. Place RBSF above opening by sliding flange in place
underneath shingle. Using a #8 or #10 screw(or nails) should
be placed approximately a distance of 4 inch on center
on all 4 sides.
top half of flange should be
secured underneath shingles
screws should be @ 4" on
center on all 4 sides
/