Strait-Flex ISR Operating instructions

Product name:

Big-Stick Inside Rolling Tool

Short product description

Big-Stick Inside Roller is designed to speed application time of Inside 90º Big-Stick and

other flex-tape products for 90º inside corners applications. This tool makes installation

extremely fast and squares up corner beads.

Product description

• Speeds application time.

• For use with corner beads and flex tapes.

• Squares up corner beads on walls.

• Attaches to common extension poles.

Applications

• 90º inside corners applications.

Specifications

• Size 8” x 1-7/8” x 1-7/8”

• Color Code YELLOW

• Item# ISR

• 1 roller per case. 1.2lbs. per case.

Direction

Attach the inside rolling tool to an extension pole if needed. Once the drywall compound

is applied to the surface and material is laid into the corner. Use the rolling tool starting

in the middle with minimum pressure roll to the ceiling. Then again from the center roll

to the floor, repeat if needed.