Strait-Flex MF-100S User manual

Type
User manual

This manual is also suitable for

A C C E L E R A T E P E R F E C T I O N
P A P E R - F A C E D L A M I N A T E D C O M P O S I T E C O R N E R T A P E
P R O F E S S I O N A L G R A D E
Applications
n Off angles and outside 90º corners.
n Outside corners where a large fill or straightening
is required.
n Outside corners of bay windows, coffers.
n Vaulted ceilings and butterfly vaults.
n Replacing damaged metal corner bead.
Product Description
n Memory-free hinge design allows for ease of
installation, straight corners and perfect angles.
n Diamond-punched 94 lb. paper edging allows for
easier feathering, faster drying, and the highest
bonding strength. Also guarantees an even lay-down
of the paper, providing maximum adhesion with no
rippling or blistering.
n PUR-laminated nose ensures perfect corners with-
out paper fuzz-up during finishing and sanding.
n Prefinished surface. Just skim coat edges to finish.
n Rustproof.
n Cuts easily with knife or scissors.
n Straightens common framing irregularities.
n No cracks. No callbacks.
Highly Recommended
for Corners in
Vaulted Ceilings
I N F O R M A T I O N S H E E T P h o n e : 8 8 8 - 7 4 7 - 0 2 2 0
L940911
n 3” x 100’ roll size.
n Color Code BLACK
n Item# MF-100
UPC 6-56690-12372-9
n WHOLESALE PKG
CASE ITEM# MF-100C
Case weight: 39 lbs.
10rls per case.
24 cases per pallet.
Advantages Over Competitors
STRAIT-FLEX COMPETITOR COMPETITOR
MID-FLEX 300 PAPER/PLASTIC FLEX PAPER/METAL FLEX
PUR-Laminated Nose No Protective Nose No Protective Nose
Diamond-Punched Formulated Surface Standard 84 lb. Paper
94 lb. Paper Paper
Superior Bond Adequate Bond Good Bond
Measurements Printed No Printing No Printing
in US and Metric
Printed Center Line No Printing No Printing
for Easy Alignment
Will Not Rust Will Not Rust Will Rust
Directions for Use
1 Cut Strait-Flex MID-FLEX
300
to desired length. Fold in half at center crease to
desired angle.
2 Using a 5” or 6” taping knife, apply a liberal coat of all-purpose joint compound
to inside or outside corners.
3 Press MID-FLEX
300
into wet compound. Adjust if necessary to create a straight
line. Wipe down with knife with additional pressure to the outer edge of
MID-FLEX
300
. Immediately apply light skim coat of joint compound to outer
edge and let dry.
4 Apply final coat, let dry, and sand.
REPAIRS OVER PAINTED SURFACES. Strait-Flex recommends the use of
Strait-Flex Super-Bond or latex paint, mixed with all-purpose joint compound,
for increased bonding strength.
Specifications
Warranty
Strait-Flex tapes are backed by a three year warranty. When applied to a sound
structure, built on a permanent foundation using recommended application
techniques, we warrant that these products will not edge-crack for a period of
three years from the date of purchase. Strait-Flex International, Inc. will match
any manufacturer’s warranty on a similar product. Contact Strait-Flex
International, Inc. for complete details.
Check out our website at www.straitflex.com
Diamond-punched
pattern ensures
ultimate bonding and
faster drying.
Strait-Flex’s PVC
composite material
Memory-free
hinge design
allows for sharp
inside or outside
corners
  • Page 1 1
  • Page 2 2

Strait-Flex MF-100S User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI