Strait-Flex OSR Operating instructions

Product name:

Big-Stick Outside Rolling Tool

Short product description

Big-Stick Outside Roller is designed to speed application time of Arch-Flex, Outside 90º

Big-Stick and other flex-tape products for 90º outside corners applications. This tool

makes installation extremely fast and squares up corner beads.

Product description

• Speeds application time.

• For use with corner beads and flex tapes.

• Squares up corner beads on walls.

• Attaches to common extension poles.

Applications

• 90º outside corners applications

Specifications

• Size 6-1/4”x 3-3/8”x 3-3/8”

• Color Code YELLOW

• Item# OSR

• 1 roller per case. 1.2lbs. per case.

Direction

Attach the outside rolling tool to an extension pole if needed. Once the drywall

compound is applied to the surface and material is laid into the corner. Use the rolling

tool starting in the middle with minimum pressure roll to the ceiling. Then again from

the center roll to the floor, repeat if needed.