㪏㪌㪍㪄㪈㪉㪍㪌㪐㪊㪄㪇㪇㪈㪄㪇㪇
Express5800 series N8403-019
ᴛᴶᴀᴕᴐᴉᴲᴊᴒᴵᴜᴳᴈᴯ ᴖᴇᴜᴉᴇᴤᴷᴎᴶᴊᴜᴶ
Disk Array Controller Setup Guide
㪪㪼㪼㩷㫋㪿㪼㩷㫉㪼㫍㪼㫉㫊㪼㩷㫊㫀㪻㪼㩷㫆㪽㩷㫋㪿㫀㫊㩷㪻㫆㪺㫌㫄㪼㫅㫋㩷㪽㫆㫉㩷㪜㫅㪾㫃㫀㫊㪿㩷㫍㪼㫉㫊㫀㫆㫅㪅㩷
̅ဇɥƷƝදॖ ࣏᳸ƣƓᛠLjƘƩƞƍ᳸
ஜᙌԼƷȦȸǶȸǺǬǤȉƸŴȖȬȸȉǵȸȐช˄Ʒ ':24'55$7+.&'4%&41/ ϋƷǪȳȩǤȳȉǭ
ȥȡȳȈƱƠƯӓNJǒǕƯƓǓLJƢŵžȦȸǶȸǺǬǤȉſƴᚡ᠍ƞǕƯƍǔžܤμɥƷƝදॖſž̅ဇɥƷ
ƝදॖſǛᛠǜưŴƦƷϋܾǛǑƘྸᚐƠƨɥư˺ಅǛᘍƬƯƘƩƞƍŵžȦȸǶȸǺǬǤȉſƴᚡ᠍ƞǕƯ
ƍǔදॖʙǛܣǒƣƴӕǓৢƏƱᘺፗǍԗᡀƷܼᝠƴܹǛɨƑǔƹƔǓưƳƘज़ᩓǍƚƕŴ້ͻǛƢǔ
ऀǕƕƋǓLJƢŵஜƸٻЏƴ̬ሥƠŴஜᴎᴈᴜᴶǛᇹɤᎍƴᜯบLJƨƸ٥ҲƢǔƱƖƴƸŴஜǛɟደƴƓบ
ƠƘƩƞƍŵLJƨŴࡑూƴƭƖLJƠƯƸŴӲᐯ˳ƷࡑూᴱᴈᴱƴࢼƬƯƘƩƞƍŵ
ᲶᜩԓᘙᅆƴƭƍƯᲸ
ਦᅆǛܣǒƳƍƱŴʴƕരʧƢǔŴLJƨƸͻǛƏƓƦǕƕƋǓLJƢŵ
ਦᅆǛܣǒƳƍƱŴ້ͻǍƚƕǛƏƓƦǕǍཋྸႎܹǛƏƓƦǕƕƋǓLJƢŵ
ŪƖNJǒǕƨǹȭȃȈӏƼᘺፗˌٳƴܱᘺƠLJƢƱᘺፗƕദࠝƴѣ˺ƠƳƘƳǔƹƔǓưƳƘŴज़ᩓǍ
້໎ƷүᨖƕƋǓLJƢŵLJƨஜᙌԼƸŴ2%+ țȃȈȗȩǰೞᏡǛǵȝȸȈƠƯƓǓLJƤǜŵஜᙌԼ
Ǜ৷ƖࠀƠƢǔئӳƸŴ࣏ƣȖȬȸȉǵȸȐǛȖȬȸȉኛȦȋȃȈƔǒܦμƴࡽƖ৷ƍƯƔǒᘍƬ
ƯƘƩƞƍŵ
ŪȖȬȸȉǵȸȐƷᩓเǛ 1(( ƴƠƨႺࢸƸŴȏȸȉȇǣǹǯȉȩǤȖƳƲǛИNJᘺፗϋƷᢿԼƕ᭗
ภƴƳƬƯƍLJƢŵҗЎƴϬNJƨƜƱǛᄩᛐƠƯƔǒӕǓ˄ƚӕǓٳƠǛᘍƬƯƘƩƞƍŵ
ŪஜᙌԼǛዌݣƴЎᚐƠƨǓŴ̲ྸȷોᡯǛᘍƬƨǓƠƳƍưƘƩƞƍŵᘺፗƕദࠝƴѣ˺ƠƳƘƳǔ
ƹƔǓưƳƘŴज़ᩓǍ້໎ƷүᨖƕƋǓLJƢŵ
ŪஜᙌԼƸŴҔၲೞ֥ȷҾ܇щᚨͳǍೞ֥Ŵᑋᆰܢܬೞ֥ȷᡛᚨͳǍೞ֥ƳƲŴʴԡƴ᧙ǘǔᚨͳǍ
ೞ֥ƓǑƼ᭗ࡇƳࣱ̮᫂Ǜ࣏ᙲƱƢǔᚨͳǍೞ֥ƳƲǁƷኵLjᡂLjǍƜǕǒƷೞ֥ƷСࣂƳƲǛႸ
ႎƱƠƨ̅ဇƸॖƞǕƯƍLJƤǜŵƜǕǒƷᚨͳǍೞ֥ŴСࣂǷǹȆȠƳƲƴஜᘺፗǛ̅ဇƠƨ
ኽௐŴʴ៲ʙŴᝠငܹƳƲƕဃơƯNj࢘ᅈƸƍƔƳǔᝧ˓NjƍƔƶLJƢŵ
දॖ
䈖䈱ⵝ⟎䈲䇮ᖱႎಣℂⵝ⟎╬㔚ᵄ㓚ኂ⥄ਥⷙද⼏ળ㩿㪭㪚㪚㪠㪀䈱ၮḰ䈮ၮ䈨䈒䉪䊤䉴㪘ᖱႎᛛⴚⵝ⟎䈪䈜䇯䈖䈱
ⵝ⟎䉕ኅᐸⅣႺ䈪↪䈜䉎䈫㔚ᵄᅹኂ䉕ᒁ䈐䈖䈜䈖䈫䈏䈅䉍䉁䈜䇯䈖䈱႐ว䈮䈲↪⠪䈏ㆡಾ䈭ኻ╷䉕⻠䈝䉎
䉋䈉ⷐ᳞䈘䉏䉎䈖䈫䈏䈅䉍䉁䈜䇯
㩷
㩷
㩷
ຠ᭽㩷
ஜᙌԼƸŴ5GTKCN#VVCEJGF5%5+Ტ5#5ᲣᙹƷȏȸȉȇǣǹǯǛ 'ZRTGUU ȖȬȸȉǵȸȐϋᢿƴƯ
ዓƢǔƨNJƷȇǣǹǯǢȬǤdzȳȈȭȸȩưƢŵ
ဪ0
ԼӸȇǣǹǯǢȬǤdzȳȈȭȸȩ&KUM#TTC[%QPVTQNNGT
ٳ࢟ݡඥ
ஜ˳OO9ZOO&ZOO* ᴢᴶᴇᴐᴤᴷᴲᴈᴵOO9ZOO&ZOO*
I
ѣ˺ภࡇ ᳸é
ѣ˺ࡇ ᳸
ෞᝲᩓщ 9
䉶䉾䊃䉝䉾䊒ᚻ㗅䋨⚵䉂ㄟ䉂⩄ᤨ䈮䈲䇮䉶䉾䊃䉝䉾䊒ታᣉᷣ䉂䈪䈜䇯䋩㩷
㩷
ǻȃȈǢȃȗڼ
ȖȬȸȉǵȸȐǛኛȦȋȃȈƔǒܦμƴࡽƖ৷ƍƯƘƩƞƍŵ
ஜᙌԼƷӕǓ˄ƚƳǒƼƴ *&& Ʒ᠍
ȖȬȸȉǵȸȐǛኛȦȋȃȈƴ᠍ࢸŴȖȬȸȉǵȸȐƷᩓเ৲λ
දॖᲴȖȬȸȉǵȸȐƷ $+15 ǻȃȈǢȃȗƴƓƍƯᲬሖƷᚨܭƕ࣏ᙲưƢŵ
ᲫᲨᡙьƠƨஜᙌԼ6[RG ǫȸȉƷǪȗǷȧȳ 41/ ƷǹǭȣȳǛஊј'PCDNGFƴƠƯƘƩƞƍŵ
ᲬᲨǪȳȜȸȉ 5%5+Ტ'ODGFFGF5%5+ᲣƷӲȑȩȡȸǿǛј&KUCDNGFƴƠƯƘƩƞƍŵ
dzȳȕǣǰȬȸǷȧȳȦȸȆǣȪȆǣ 9GD$+15 Ʒឪѣ
ȐȸȁȣȫȇǣǹǯƷ˺
ૢӳࣱȁǧȃǯ%JGEM%QPUKUVGPE[
ǻȃȈǢȃȗኳʕ
㶎
ஜᙌԼƷ9KPFQYUဇȉȩǤȐƸŴ᠍ݣᝋǵȸȐƴช˄Ʒ':24'55$7+.&'4%&41/ϋƴӓNJǒǕ
ƯƍǔȉȩǤȐǛ̅ဇƠƯƘƩƞƍŵǷȸȠȬǹǤȳǹȈȸȫܱᘍƴƸŴᐯѣႎƴᢘဇƞǕLJƢŵ
㩷
˄ޓԼƷᄩᛐ ᲢኵLjᡂLjЈᒵƴƸŴǵȸȐƴኵLjᡂLJǕLJƢŵᲣ
ஜᙌԼƷѼረƷɶƴƸŴˌɦƷ˄ޓԼƕλƬƯƍLJƢŵ˄ޓԼƕƢǂƯƦǖƬƯƍǔƜƱǛᄩᛐƠŴƦǕƧ
Ǖໜ౨ƠƯƘƩƞƍŵɢɟឱǓƳƍNjƷǍͻƠƯƍǔNjƷƕƋǔئӳƸŴᝤ٥ࡃƴᡲዂƠƯƘƩƞƍŵ
ȇǣǹǯǢȬǤdzȳȈȭȸȩஜ˳
ӕǓ˄ƚȍǸ̾
ȐȃǯȗȬȸȳȜȸȉ
ϋᢿዓDZȸȖȫஜ
0 ȇǣǹǯǢȬǤdzȳȈȭȸȩ ǻȃȈǢȃȗ ǬǤȉ
࠰ உ И༿
ࡴᅈƷᚩӧƘᙐᙌȷો٭ƳƲǛᘍƏƜƱƸưƖLJƤǜŵ
ஜƷϋܾƸʖԓƳƘ٭ƢǔƜƱƕƋǓLJƢŵ
ஜᙌԼƷӕǓ˄ƚᲩӕǓٳƠƸƓܲಮ̾ʴưNjᘍƑLJƢƕŴƜƷئӳŴᘺፗƓǑƼᢿԼƷᄊLJƨƸᢃဇ
ƠƨኽௐƷࢨ᪪ƴƭƍƯƸƦƷᝧ˓ǛƍƔƶLJƢƷưƝʕ১ƘƩƞƍŵஜᘺፗƴƭƍƯᛇƠƘŴݦᧉႎ
ƳჷᜤǛਤƬƨ̬ܣǵȸȓǹ˟ᅈƷ̬ܣՃƴӕǓ˄ƚᲩӕǓٳƠǛᘍǘƤǔǑƏƓѰNJƠLJƢŵ
Read this "Safety Precautions" and separately provided User's Guide of the server thoroughly
before getting started to use this product safely.
For the detailed operation and installing, refer to the “N8403-019 Disk Array Controller User’s
Guide” in NEC EXPRESSBUILDER CD-ROM that comes with the Blade Server.
After you have read this brochure, store it in the place that is easy to access.
SAFETY PRECAUTIONS
This section describes the information necessary to use this product safely.
Safety Indications
Follow the instructions described in this User's Guide for your safety to use this product. Keep this manual
for future use. To transfer or sell this product to a third party, make sure to provide this setup Guide together
with the Product to a third party. Dispose the product according to all national laws and regulation.
This product contains components with possible danger, hazards that may cause by ignoring warnings, and
preventive actions against such hazards.
In the User's Guide, "WARNING" or "CAUTION" is used to indicate a degree of danger.
These terms are defined as follows:
WARNING
This symbol indicates that using the product improperly in defiance of this symbol is
likely to result in death, serious injury, fire, or damage to the device and peripherals.
CAUTION
This symbol indicates that using the product improperly in defiance of this symbol may
result in injury or only damage to property.
WARNING
ŠThis card to a slot or device other than those specified may cause an electric shock. Do not attach this
card to any non-specified slot or device. This card does not support the PCI hot plug feature. Before
connecting or disconnecting this card, be sure to remove the CPU blade from the Blade Enclosure.
ŠImmediately after the server is powered off, its internal components such as hard disk drives are very hot.
Leave the server until its internal components fully cool down before installing/removing any
components.
ŠDo not attempt to disassemble, repair, or alter this product. Failure to follow this instruction may cause an
electric shock or fire as well as malfunctions of the server.
ŠThis product is not intended to be used with or control facilities or devices concerning human lives,
including medical devices, nuclear facilities and devices, aeronautics and space devices, transportation
facilities and devices; and facilities and devices requiring high reliability. NEC assumes no liability for
any accident resulting in personal injury, death, or property damage if this product has been used in the
above conditions.
CAUTION
To install the product in the server of rack-mount model, you must remove the server from the rack before
installing the product. Read carefully the manuals that come with your server and the rack to conduct the
work safely. NEC recommends that you request a maintenance engineer of your service representative
having the expert knowledge on the server to do the installation and removal procedures.
CE Statement
Warning: This is a Class A product. In domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures (EN55022).
Specifications for Disk Array Controller
Product Model Number N8403-019
Product Name Disk Array Controller
External dimension main Board :113mm(W) x 135mm(D) x 22mm(H)
Backplane : 40mm(W) x 102mm(D) x 39mm(H)
Weight 150g
Temperature 10 é to 35é
Humidity 20% to 80%
Power consumption 19.44 W
Installation
Start setup
Completely pull out the server from the Blade Enclosure.
Install the disk array controller and Hard Disk Drives
Install the server to the Blade Enclosure and Power on.
Note: Configure System BIOS of the Server ( It is necessary to set two places.)
1. Enable Option ROM Scan [Mezzanine Type2 Option ROM]
2. Disable the parameters for the onboard SCSI controller. [Embedded SCSI ]
Run Web BIOS
Create Virtual Disk
Check Consistency
Finish setup
The Driver of Windows for “N8403-019 Disk Array Controller” is in the NEC EXPRESSBUILDER CD-ROM that comes
with the Blade Server.
Please confirm that your kit includes the following items
1. Disk Array Controller Main Board 1 piece
2. Screw 3 pieces
3. Backplane Board 1 piece
4. Internal Cable 1 piece
N8403-019 Disk Array Controller
Set UP Guide
1
st
Edition Oct,2006
Reprinting or changing of this document without prior approval of NEC is prohibited.
The information contained in this document is subject to change at any time, without prior notice.
-
1
-
2
NEC EXPRESS5800 N8403-019 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
NEC SigmaBlade B120a User guide
-
-
-
-
-
-
-
NEC Express5800/120Li User guide
-
-
Other documents
-
Bull NovaScale T840 User guide
-
-
-
-
-
-
-
-
Intel 5800/120Ld User manual
-
Paradigm 819DEFWT Owner's manual