2. Room Board
  3. COLES

Room Board COLES Installation guide

  • Hello! I've reviewed the Room&Board Coles vanities installation and specifications document. It outlines important steps for moving, storing, and installing these vanities, including using a two-person team, applying silicone, and leveling feet. I'm ready to assist with any questions you may have about the installation process or the features described.
  • Can I return the vanity after installation?
    What do I do if I notice damage or defects?
    How should I handle the vanity during the installation?
4/18/23
800.486.6554 | roomandboard.com
COLES VANITIES INSTALLATION
AND SPECIFICATIONS
PROFESSIONAL INSTALLATION RECOMMENDED
Please inspect your new vanity prior to installation. Once the vanity has been installed or altered, such as
cutting the cabinet’s back panel or adhering the top, it cannot be returned. If you notice any damage or
defects, please contact us at 800.486.6554 or [email protected] for assistance.
CAUTION
Moving and Storage
• Keep in original packaging until installation to protect from damage.
• Do not stack anything on top of the packaging.
• Use a two-person team to lift and move.
Installation Requirements
• Professional installation with a two-person team.
• Water supply and plumbing installed according to local code.
• Level floor and plumb walls at installation site.
Vanity Installation Recommendations
• Cut or drill holes in the back or bottom panel of the vanity cabinet to accommodate plumbing.
• Attach the vanity cabinet securely to the wall using appropriate hardware for your wall material.
• If needed, use the supplied leveler feet to accommodate a floor that is not level. To use, remove plastic foot caps, insert the
levelers and set at the desired height.
Top Installation Recommendations
• Apply a nickel-sized amount of clear 100% silicone to all four corners of the top edge of the vanity cabinet.
• Using a two-person team, lift and place the vanity top. Lower it slowly; do not drop it onto the vanity cabinet.
• Wipe o excess silicone immediately.
Backsplash and Side Splash Installation Recommendations
• Apply a nickel-sized amount of clear 100% silicone every eight to ten inches on the wall where the backsplash will be installed.
• Install the backsplash by gently pushing it onto the wall and centering it on the top.
• If you selected a left overhang or right overhang top, a side splash is included. Install the side splash after the backsplash.
• Once cured, run a small bead of 100% clear silicone along the joint where the backsplash and optional side splash meet
the vanity top.
For wood and quartz cleaning and care information, visit roomandboard.com/care.
4/18/23
800.486.6554 | roomandboard.com
48"
24.25"
24.66"
38.5"
46.5"
23.5"
10.81"
7.5"
.75”
2" 9.25"
2.5"
.5"
36w 21.75d 34h Single-Sink Vanity
Tops with an overhang left side only or
right side only are 35.25" wide.
.75"
23.25"
12.13"
24.25"
2"
24.25"
26”
2.5"
9.25"
.5"
23.5"
.75"
20.13"
21.5"
1.25"
16"
3"
.75"
26w 21.75d 34h Single-Sink Vanity
Tops with an overhang left side only
or right side only are 25.25" wide.
Side view measurements
apply to all vanity sizes
and both sink shapes.
Coles Vanities
48w 21.75d 34h Single-Sink Vanity
Tops with an overhang left side only or right side only
are 47.25" wide.
60w 21.75d 34h Single-Sink Vanity
Tops with an overhang left side only or right side only are 59.25" wide.
60"
.75”
24.25"
12.75"
50"
58.5"
.5"
16.25"
7.5"
23.5"
9.25"
2.5"
2"
.75"
23.25"
17.19"
24.25"
2"
24.25"
34.5"
36"
2.5"
9.25"
.5"
72"
62"
70.5"
.5"
24.25"
14.5"
27.5"
7.5"
.75”
23.5"
2.5"
9.25"
2"
72w 21.75d 34h Double-Sink Vanity
Tops with an overhang left side only or right side only are 71.25" wide.
60"
7.75"
8.25"
25"
24.25" 23.5"
50"
58.5"
.5"
9.25"
2.5"
2"
60w 21.75d 34h Double-Sink Vanity
Tops with an overhang left side only or right side only are 59.25" wide.
4/18/23
800.486.6554 | roomandboard.com
• All vanity tops available
with left and right side
overhang, no overhang,
overhang left side only or
overhang right side only.
• Backsplash included;
side splash included for
overhang left side only or
overhang right side only.
Rectangular sink front view
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
7.5 "
6"
1.75"
21.75"
26"
4.375"4.375"
Oval sink front view
11.625"
1.875"
3"
1.375"
3.875”
1.75"
7.5 "6"
21.75"
26"
5.625"5.625"14.625"
26" and 36" RECTANGULAR SINKS, 8" spread faucet holes
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
7.5 "
6"
1.75"
21.75"
26"
4.375"4.375"17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
21.75"
36"
9.375"9.375"
1.75"
17.25"
12.25"
1.875"
2.375"
1.375"
5.625"
3.875"
7.5 "
6"
4"
4.375"
21.75"
26"
1.75"
4.375"17.25"
12.25"
1.875"
3.875"
21.75"
36"
9.375"9.375"
2.375"
1.375"
5.625"
4"
1.75"
26" and 36" RECTANGULAR SINKS, single faucet hole
26" and 36" OVAL SINKS, single faucet hole
26" and 36" OVAL SINKS, 8" spread faucet holes
11.625"
1.875"
3"
1.375"
3.875”
1.75"
7.5 "6"
21.75"
26"
5.625"5.625"14.625"
11.625"
1.875"
3"
1.375"
3.875"
1.75"
21.75"
36"
10.625"10.625"14.625"
11.625"
3.875"
1.75"
7.5 "
6"
21.75"
26"
5.625"5.625"
14.625"
3"
1.875"
1.375"
4"
11.625"
3.875"
1.75"
21.75"
36"
10.625"10.625"
14.625"
3"
1.875"
1.375"
4"
26w 21.75d 34h Single-Sink Vanity
Tops with no overhang are 24.5" wide;
tops with an overhang left side only or
right side only are 25.25" wide.
36w 21.75d 34h Single-Sink Vanity
Tops with no overhang are 34.5" wide;
tops with an overhang left side only or
right side only are 35.25" wide.
Vanity Tops and Sinks
800.486.6554 | roomandboard.com 1/1/21
• All vanity tops available
with left and right side
overhang, no overhang,
overhang left side only or
overhang right side only.
• Backsplash included;
side splash included for
overhang left side only or
overhang right side only.
Rectangular sink front view
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
7.5 "
6"
1.75"
21.75"
26"
4.375"4.375"
Oval sink front view
11.625"
1.875"
3"
1.375"
3.875”
1.75"
7.5 "6"
21.75"
26"
5.625"5.625"14.625"
48" RECTANGULAR SINKS, 8" spread faucet holes
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
21.75"
48"
15.375"15.375"
1.75"
17.25"
12.25"
1.875"
3.875"
21.75"
48"
15.375"15.375"
2.375"
1.375"
5.625"
4"
1.75"
11.625"
1.875"
3"
1.375"
3.875"
1.75"
21.75"
48"
16.625" 16.625"14.625"
11.625"
3.875"
1.75"
21.75"
48"
16.625"16.625"
14.625"
3"
1.875"
1.375"
4"
48" RECTANGULAR SINKS, single faucet hole
48" OVAL SINKS, single faucet hole
48" OVAL SINKS, 8" spread faucet holes
48w 21.75d 34h Single-Sink Vanity
Tops with no overhang are 46.5" wide; tops with an over-
hang left side only or right side only are 47.25" wide.
Vanity Tops and Sinks
4/18/23
800.486.6554 | roomandboard.com
• All vanity tops available
with left and right side
overhang, no overhang,
overhang left side only or
overhang right side only.
• Backsplash included;
side splash included for
overhang left side only or
overhang right side only.
Rectangular sink front view
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
7.5 "
6"
1.75"
21.75"
26"
4.375"4.375"
Oval sink front view
11.625"
1.875"
3"
1.375"
3.875”
1.75"
7.5 "6"
21.75"
26"
5.625"5.625"14.625"
60" RECTANGULAR SINKS, 8" spread faucet holes
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
21.75"
60"
21.375"21.375"
1.75"
17.25"
12.25"
1.875"
3.875"
21.75"
60"
21.375"21.375"
2.375"
1.375"
5.625"
4"
1.75"
11.625"
1.875"
3"
1.375"
3.875"
1.75"
21.75"
60"
22.625" 22.625"14.625"
11.625"
3.875"
1.75"
21.75"
60"
22.625"22.625"
14.625"
3"
1.875"
1.375"
4"
60" RECTANGULAR SINKS, single faucet hole
60" OVAL SINKS, single faucet hole
60" OVAL SINKS, 8" spread faucet holes
60w 21.75d 34h Single-Sink Vanity
Tops with no overhang are 58.5" wide; tops with an overhang left side
only or right side only are 59.25" wide.
Vanity Tops and Sinks
4/18/23
800.486.6554 | roomandboard.com
60" RECTANGULAR SINKS, single faucet hole
60" RECTANGULAR SINKS, 8" spread faucet holes
60" OVAL SINKS, single faucet hole
60" OVAL SINKS, 8" spread faucet holes
60w 21.75d 34h Double-Sink Vanity
Tops with no overhang are 58.5” wide; tops with an overhang left side only or right
side only are 59.25” wide.
Vanity Tops and Sinks, continued
• All vanity tops available
with left and right side
overhang, no overhang,
overhang left side only or
overhang right side only.
• Backsplash included;
side splash included for
overhang left side only or
overhang right side only.
Rectangular sink front view
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
7.5 "
6"
1.75"
21.75"
26"
4.375"4.375"
Oval sink front view
11.625"
1.875"
3"
1.375"
3.875”
1.75"
7.5 "6"
21.75"
26"
5.625"5.625"14.625"
4/18/23
800.486.6554 | roomandboard.com
72" RECTANGULAR SINKS, single faucet hole
17.25"
12.25"
1.875"
2.375"
1.375"
5.625"
3.875"
21.75"
72"
6.25" 25" 6.25"17.25"
12.25"
1.875"
2.375"
1.375"
5.625"
3.875"
1.75"
1.75"
72" RECTANGULAR SINKS, 8" spread faucet holes
17.25"
12.25"
2.375"
3.875"
1.75"
21.75"
72"
6.25"25"6.25"
17.25"
12.25"
1.875"
2.375"
3.875"
1.75"
1.875"
1.375"
5.625"
4"1.375"
5.625"
4"
72" OVAL SINKS, single faucet hole
11.625"
1.875"
3"
1.375"
3.875"
1.75"
21.75" 7.312" 28.125"14.625"
11.625"
1.875"
3"
1.375"
3.875"
1.75"
7.312"14.625"
72"
72" OVAL SINKS, 8" spread faucet holes
11.625"
3.875"
1.75"
21.75"7.312"28.125"
14.625"
11.625"
3.875”
1.75"
7.312"
14.625"
72"
3"
1.875"
1.375"
4"
3"
1.875"
1.375"
4"
72w 21.75d 34h Double-Sink Vanity
Tops with no overhang are 70.5" wide; tops with an overhang left side only or right
side only are 71.25" wide.
Vanity Tops and Sinks, continued
• All vanity tops available
with left and right side
overhang, no overhang,
overhang left side only or
overhang right side only.
• Backsplash included;
side splash included for
overhang left side only or
overhang right side only.
Rectangular sink front view
17.25"
12.25"
1.875"
2.375"
1.375"5.625"
3.875"
7.5 "
6"
1.75"
21.75"
26"
4.375"4.375"
Oval sink front view
11.625"
1.875"
3"
1.375"
3.875”
1.75"
7.5 "6"
21.75"
26"
5.625"5.625"14.625"
/