2. Room Board
  3. Gardner
Gardner

Room Board Gardner User manual

  • Hello! I've reviewed the Installation Instructions for the GARDNER Light Fixture. This document details the necessary steps for installing the light, and includes a list of components and tools needed. I'm ready to answer any specific questions you may have about the installation process.
  • What tools are recommended for installation?
    What components are included with the product?
    What is the first step in the installation process?
800.486.6554 | roomandboard.com 9/21/22
B.
A.
C.
A. -Gardner Light Fixture
B. - Mounting Plate
C. - Mounting Plate Screws
D. - Back Plate Screws
E. - Wire Nuts
(hardware not to scale)
E.
D.
GARDNER
INSTALLATION INSTRUCTIONS
Keep these instructions for future use
ATTENTION
(hardware not to scale)
Recommended Tools
• Phillips Screwdriver
• Flat Head Screwdriver
• Wire Strippers
This Product Includes
A. Gardner Light Fixture
B. Mounting Plate
C. Mounting Plate Screws x2
D. Back Plate Screws x2
E. Wire Nuts
If you do not have an existing electrical light box in your intended
installation site, have one installed by a licensed professional.
800.486.6554 | roomandboard.com 9/21/22
Installation Instructions
Attach mounting plate to junction box using
provided mounting plate screws.
Using the included wire nuts, twist together the
wires from the sconce with their corresponding
wires from the junction box. Tuck the excess wire
into the junction box.
Attach sconce to mounting plate using provided
back plate screws.
Return power to circuit and turn on light.
1
2
3
4
CAUTION Cut power to circuit
before installation.
/