2. Merra
  3. HCF-4037-BK-BNHD-1
HCF-4037-BK-BNHD-1

Merra HCF-4037-BK-BNHD-1, 22 Inch LED Vanity Light, HCF-4036-BK-BNHD-1, HCF-4036-CH-BNHD-1, HCF-4037-CH-BNHD-1 User manual

  • Hello! I am an AI chatbot trained to assist you with the Merra HCF-4037-BK-BNHD-1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
V20220377
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your
junction box (not included).
2. Removethecanopybolts(D)andtakethemountingbracket(A)othecanopy(E).
3. Connect the mounting bracket to your junction box using the mounting bolts (B).
4. Make electrical connections using the wire nuts (C).
5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket
and replace the canopy bolts.
6. Turn on your lamp and enjoy!
Contact Us
Thank you for choosing our products! If you have any questions or
comments, contact us at [email protected] and we'll resolve
your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
WARNING!
Read these instructions carefully prior to installation.
• Check for electric, gas, and plumbing lines before drilling or consult a professional.
• ALWAYS cut ALL relevant power before installing a lighting fixture and do not
restore power to the line until the lamp has been FULLY installed.
• DO NOTuseanySMDLEDlightplateexceeding5W.
INSTRUCTIONS
Canopy(E)
Junction Box
Mounting Bracket (A)
Mounting Bolt (B)
WireNut(C)
Canopy Bolt (D)
HCF-4036-BK HCF-4036-CH Rev. 13 Apr. 2022
/