2. Pepperl+Fuchs
  3. Flush Mounting PIR20

Pepperl+Fuchs Flush Mounting PIR20 Operating instructions

  • Hello! I've reviewed the datasheet for the PIR20 Flush Mounting PIR20 sensor frame. This document provides detailed information on its dimensions, mounting procedure and technical data. I'm ready to assist you with any questions you have about this product.
  • What material is the frame made of?
    What are the dimensions of the frame?
    What is the setting angle?
    What is the suitable series for this frame?
Merkmale
www.pepperl-fuchs.com
Asia Pacific Headquarters
Pepperl + Fuchs Pte Ltd.
Singapore 139942
Telephone +65 6779 9091
Telefax +65 6873 1637
[email protected]
USA Headquarters
Pepperl + Fuchs Inc.
Twinsburg Ohio, 44087 · USA
Telephone +1 330 425-3555
Telefax +1 330 425-4607
[email protected]
Worldwide Headquarters
Pepperl+Fuchs GmbH
68307 Mannheim · Germany
Telephone: +49 621 776-0
Telefax: +49 621 776-1000
info@de.pepperl-fuchs.com
Zubehör TTA
TTA Accessories
Part-No: 203967 EDM: 45-2380
Date: 2007-10-12 DIN A3 -> DIN A7
Adressen
Addresses
Features
Bestellbezeichnung
Model Number
Flush Mounting PIR20
Unterputz-Einbaurahmen für Sensoren der Serien PIR20
Flush-mounted frame for sensors in the PIR20
• Einfache Montage • Simple mounting
Technische Daten
Allgemeine Daten
Einstellwinkel 0 °
Mechanische Daten
Material ABS, schwarz
Masse ca. 11 g
Abmessungen 110 mm x 40 mm x 37 mm
Befestigung Befestigungsmaterial inklusive
Passende Serien
Serie PIR20
Hinweise
1. Schieben Sie den Sensor in Befestigungsbügel.
2. Fixieren Sie den Sensor mit den mitgelieferten Schrauben (2,9 mm x 6,5 mm).
3. Setzen Sie den montierten Sensor in den vorbereiteten Ausschnitt mit den Abmessungen 77mmx29mm
und fixieren Sie den Sensor mit den mitgelieferten Befestigungsschrauben.
1
2
3
Technical data
General specifications
Setting angle 0 °
Mechanical specifications
Material ABS, black
Mass approx. 11 g
Dimensions 110 mm x 40 mm x 37 mm
Mounting Mounting accessories included
Suitable series
Series PIR20
Notes
1. Insert the sensor into the brackets.
2. Use the provided screws (2.9 mm x 6.5 mm) for fixing the sensor.
3. Integrate the mounted sensor into the hole with dimensions 77mmx29mm and fixing with provided screws.
1
2
3
Abmessungen/Dimensions
90
27
110
2 x ø 4.5
14
40
16.5
37
/