Pepperl+Fuchs Flush Mounting AIR20 Operating instructions

  • Hello! I'm a chat assistant, and I've reviewed the datasheet for the Pepperl+Fuchs mounting frame, specifically the Flush Mounting AIR20 model. This document details the features and specifications of the frame, including its simple mounting, adjustable setting angle, and compatibility with the AIR20 and PIR20 sensor series. I'm ready to answer any questions you have about this product.
  • What is the setting angle of the mounting frame?
    What material is the mounting frame made of?
    What are the dimensions of the mounting frame?
    What sensor series are compatible with this mounting frame?
Merkmale Zubehör TTA
Accessory DGE
Adressen
Addresses
Features
www.pepperl-fuchs.com
Pepperl+Fuchs GmbH
68301 Mannheim · Germany
Tel. +49 621 776-4411
Fax +49 621 776-27-4411
E-mail: fa-inf[email protected]
Worldwide Headquarters
Pepperl+Fuchs GmbH · Mannheim · Germany
E-mail: fa-inf[email protected]
USA Headquarters
Pepperl+Fuchs Inc. · Twinsburg · USA
E-mail: fa-inf[email protected]
Asia Pacific Headquarters
Pepperl+Fuchs Pte Ltd · Singapore
E-mail: fa-inf[email protected]
Company Registration No. 199003130E
Part-No: 203966 EDM: 45-2379A
Date: 2013-09-03 DIN A3 -> DIN A7
Bestellbezeichnung
Model Number
Flush Mounting AIR20
Unterputz-Einbaurahmen für Sensoren der Serien AIR20
Flush-mounted frame for sensors in the AIR20
Einfache Montage Simple mounting
Technische Daten
Allgemeine Daten
Einstellwinkel 0 ... 15 °
Mechanische Daten
Material ABS, schwarz
Masse ca. 8 g
Abmessungen 110 mm x 40 mm x 37 mm
Befestigung Befestigungsmaterial inklusive
Passende Serien
Serie AIR20 , PIR20
Hinweise
1. Schieben Sie den Sensor in Befestigungsbügel
2. Stellen Sie den gewünschten Neigungswinkel zwischen 0° und 15° ein
3. Fixieren Sie den Sensor mit den mitgelieferten Schrauben (2,9 mm x 6,5 mm)
4. Setzen Sie den montierten Sensor in den vorbereiteten Ausschnitt mit den Abmessungen 77mmx29mm
und fixieren Sie den Senosr mit den mitgelieferten Befestigungsschrauben
1
3
2
4
Technical data
General specifications
Setting angle 0 ... 15 °
Mechanical specifications
Material black ABS
Mass approx. 8 g
Dimensions 110 mm x 40 mm x 37 mm
Mounting Mounting accessories included
Suitable series
Series AIR20 , PIR20
Notes
1. Insert the sensor into the brackets
2. Adjust the inclination angle between 0° und 15°
3. Use the provided screws (2.9 mm x 6.5 mm) for fixing the sensor
4. Integrate the mounted sensor into the hole with dimensions 77mmx29mm and fixing with provided screws
1
3
2
4
Abmessungen/Dimensions
59
90
110
24
40
2 x ø 4.5
16.5
37
/