2. Home
  3. Home security & automation
  4. Security cameras
  5. Axis
  6. Q6042-S

Axis Q6042-S Installation guide

  • Hello! I'm your chat assistant. I've reviewed the installation guide for the AXIS Q60-S Series PTZ Dome Network Cameras, including the Q6042-S, Q6044-S, and Q6045-S Mk II models. This document details how to install these outdoor-ready cameras, connect their power, and configure their network. I'm ready to answer your questions about this device and its setup.
  • What type of SD card is recommended?
    What is the camera's power input?
    Is the multi-connector cable necessary?
    What should I do if the camera dome cover is scratched?
AXISQ60-SSeries
AXISQ6042-SPTZDomeNetworkCamera
AXISQ6044-SPTZDomeNetworkCamera
AXISQ6045-SMkIIPTZDomeNetworkCamera
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPANÕL
ò
ò
¨
¨
¾
¾
InstallationGuide
Legal Considerations
Video surveillance can be regulated by laws that vary from
country to country. Check the laws in your local region
before using this product for surveillance purposes.
This product includes one (1) H.264 decoder license. To
purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis ofce of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and tness for
a particular purpose. Axis Communications AB shall not
be liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance
or use of this material. This product is only to be used for
its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document.
This product contains licensed third-party software. See
the menu item “About” in the product’s user interface for
more information.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in the
user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable
regulatory certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW are registered
trademarks of the respective holders. Java and all
Java-based trademarks and logos are trademarks or
registered trademarks of Oracle and/or its affiliates.
UPnPTM is a certification mark of the UPnPTM Implementers
Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks
of SD-3C, LLC in the United States, other countries or both.
Also, miniSD, microSD, miniSDHC, microSDHC, microSDXC
are all trademarks or registered trademarks of SD-3C, LLC
in the United States, other countries or both.
RegulatoryInformation
Europe
ThisproductcomplieswiththeapplicableCEmarking
directivesandharmonizedstandards:
•ElectromagneticCompatibility(EMC)Directive
2004/108/EC.SeeElectromagneticCompatibility(EMC)
onpage2.
•LowVoltage(LVD)Directive2006/95/EC.SeeSafety
onpage3.
•RestrictionsofHazardousSubstances(RoHS)Directive
2011/65/EU.SeeDisposalandRecyclingonpage3.
Acopyoftheoriginaldeclarationofconformitymaybe
obtainedfromAxisCommunicationsAB.SeeContact
Informationonpage3.
ElectromagneticCompatibility(EMC)
Thisequipmenthasbeendesignedandtestedtofulll
applicablestandardsfor:
•Radiofrequencyemissionwheninstalledaccordingto
theinstructionsandusedinitsintendedenvironment.
•Immunitytoelectricalandelectromagneticphenomena
wheninstalledaccordingtotheinstructionsandused
initsintendedenvironment.
USA
This equipment has been tested using a shielded network
cable (STP) and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
The product shall be connected using a shielded network
cable (STP) that is properly grounded.
AXISQ60-SSeries
SafetyInformation
ReadthroughthisInstallationGuidecarefullybeforeinstallingtheproduct.KeeptheInstallation
Guideforfuturereference.
HazardLevels
DANGER
Indicatesahazardoussituationwhich,ifnotavoided,willresultin
deathorseriousinjury.
WARNING
Indicatesahazardoussituationwhich,ifnotavoided,couldresult
indeathorseriousinjury.
CAUTION
Indicatesahazardoussituationwhich,ifnotavoided,couldresult
inminorormoderateinjury.
NO NO
NOTICE TICE
TICEIndicatesasituationwhich,ifnotavoided,couldresultindamage
toproperty.
OtherMessageLevels
ImportantIndicatessignicantinformationwhichisessentialfortheproduct
tofunctioncorrectly.
NoteIndicatesusefulinformationwhichhelpsingettingthemostout
oftheproduct.
ENGLISH
AXISQ60-SSeries
SafetyInstructions
WARNING
•TheAxisproductshallbeinstalledbyatrainedprofessional.
NO NO
NOTICE TICE
TICE
•TheAxisproductshallbeusedincompliancewithlocallawsandregulations.
•StoretheAxisproductinadryandventilatedenvironment.
•AvoidexposingtheAxisproducttoshocksorheavypressure.
•Donotinstalltheproductonunstablebrackets,surfacesorwalls.
•UseonlyapplicabletoolswheninstallingtheAxisproduct.Excessiveforcecouldcause
damagetotheproduct.
•Donotusechemicals,causticagents,oraerosolcleaners.
•Useacleanclothdampenedwithpurewaterforcleaning.
•Useonlyaccessoriesthatcomplywithtechnicalspecicationoftheproduct.Thesecanbe
providedbyAxisorathirdparty.
•UseonlysparepartsprovidedbyorrecommendedbyAxis.
•Donotattempttorepairtheproductbyyourself.ContactAxissupportoryourAxis
resellerforservicematters.
Transportation
NO NO
NOTICE TICE
TICE
•Keeptheprotectivepackaging.WhentransportingtheAxisproduct,theprotective
packagingshallbereplacedinitsoriginalposition.
•WhentransportingtheAxisproduct,usetheoriginalpackagingorequivalenttoprevent
damagetotheproduct.
Battery
The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal
real-time clock (RTC). Under normal conditions this battery will last for a minimum of ve years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When
the battery needs replacing, a log message will appear in the product’s server report. For more
information about the server report, see the product´s setup pages or contact Axis support.
AXISQ60-SSeries
WARNING
•Riskofexplosionifthebatteryisincorrectlyreplaced.
•ReplaceonlywithanidenticalbatteryorabatterywhichisrecommendedbyAxis.
•Disposeofusedbatteriesaccordingtolocalregulationsorthebatterymanufacturer's
instructions.
DomeCover
NO NO
NOTICE TICE
TICE
•Becarefulnottoscratch,damageorleavengerprintsonthedomecoverbecausethis
coulddecreaseimagequality.Ifpossible,keeptheprotectiveplasticonthedomecover
untiltheinstallationiscomplete.
•Donotcleanadomecoverthatlookscleantotheeyeandneverpolishthesurface.
Excessivecleaningcoulddamagethesurface.
•Forgeneralcleaningofthedomecoveritisrecommendedtouseanon-abrasive,
solvent-freeneutralsoapordetergentmixedwithpurewaterandasoft,cleancloth.Rinse
wellwithpurelukewarmwater.Drywithasoft,cleanclothtopreventwaterspotting.
•Neveruseharshdetergentsoralcohols(isopropyl,butyl,propyl)andavoidcleaningthe
domecoverindirectsunlightoratelevatedtemperatures.
ENGLISH
AXISQ60-SSeries
Installation Guide
This Installation Guide provides instructions for installing AXIS Q6042-S PTZ Dome Network
Camera, AXIS Q6044-S PTZ Dome Network Camera or AXIS Q6045-S Mk II PTZ Dome Network
Camera on your network.
Installation Steps
1.Makesurethepackagecontents,toolsandothermaterialsnecessaryfortheinstallation
areinorder.Seepage9.
2.Studythehardwareoverview.Seepage11.
3.Studythespecications.Seepage18.
4.Installthehardware.Seepage22.
5.Accesstheproduct.Seepage31.
PackageContents
•AXISQ6042-SPTZDomeNetworkCamera,AXISQ6044-SPTZDomeNetworkCameraor
AXISQ6045-SMkIIPTZDomeNetworkCamera
•AXIST8605MediaConverterSwitch
•Multi-connectorcable(IP66),7m(23ft)
•DINrailclip
•InstallationandManagementSoftwareCD
•Printedmaterials
-InstallationGuide(thisdocument)
-Extraserialnumberlabel(2x)
-AVHSAuthenticationkey
RecommendedTools
NO NO
NOTICE TICE
TICE
Stainlesssteeliscorrosion-resistant,butextraneousrustcanappearifthematerialis
handledincorrectly.Usestainlesstoolstoavoidruststainsorpittingcorrosion.
•TorxscrewdriverT10(lid,cableclampingMediaConverterSwitch)
•TorxscrewdriverT20(domecoverremoval)
•TorxscrewdriverT25(domereplacement)
•Slottedscrewdriver2.5mm(socket,MediaConverterSwitch)
ENGLISH
AXISQ60-SSeries
•7mmwrench(groundscrewMediaConverterSwitch)
•8mm(5/16”)wrench/socket(Sunshield,PoleBracketT91C67(hoseclamp))
•10mm(3/8”)wrench/socket(BracketadapterAXIST91C61,AXIST94S01D,PoleBracket
T91C67)
•Cableshoepliers(groundcableMediaConverterSwitch)
•Diagonalpliers(cables)
•Wirestrippingtool(cableconnecting)
OptionalAccessories
•AXIST91C61WallMount
•AXIST94S01DPendantKit
•AXIST91C67PoleMount
•Sunshield
•Smokeddomecover
•AXIST8008PS12PowerSupply
•AXIST8310VideoSurveillanceControlBoard
•AXIST90BIlluminators
•InstallationDisplay
AXISQ60-SSeries
HardwareOverview
21345678
910 11
1Mountingholeforsunshield(3x)
2Pressurereliefvalve
3Multiconnector
4Hookforsafetywire
5Guidehole
6Inletvalve
7Mountinghole(3x)
8Partnumber(P/N)&Serialnumber(S/N)
9SDcardslot(SDHC)
10StatusLEDindicator
11Controlbutton
ENGLISH
AXISQ60-SSeries
DomeCover
1
3
4
2
5
6
1DomebracketscrewT25(4x)
2Domecover
3Rubbergasket
4Rubbergasket
5Domering
6DomeringscrewT20(4x)
Sunshield(SoldSeparately)
1
1Screwholes
AXISQ60-SSeries
MediaConverterSwitch
1
2
3
4
5
6
7
8
10
9
11
12
13
1Powerconnector(DCinput)
2Powerconnector(DCoutput)
3Networkconnector(internal)
4NetworkslotSFP(external)(2x)
5NetworkconnectorRJ45(external)(2x)
6CameraLEDindicator
7NetworkLEDindicator(4x)
8PowerLEDindicator
9Groundclip
10I/Oconnector(internal)
11I/Oconnector(external)
12Multi-connectorcable
13Groundscrew
LEDIndicators
StatusLEDIndication
UnlitConnectionandnormaloperation.
ENGLISH
AXISQ60-SSeries
GreenShowssteadygreenfor10secondsfornormaloperationafter
startupcompleted.
AmberSteadyduringstartup.Flashesduringrmwareupgrade.
Amber/RedFlashesamber/redifnetworkconnectionisunavailableorlost.
RedFlashesredforrmwareupgradefailure.
MediaConverterSwitchLEDIndicators
LEDColorIndication
UnlitDCpowerunconnectedorcurrentprotectionengaged(power
overload)
Power
GreenDCpowerconnected.
Amber10Mbitconnection.Flashesduringactivity.
Network(4x)
Green100/1000Mbitconnection.Flashesduringactivity.
CameraGreen100Mbitconnection.Flashesduringactivity.
ConnectorsandButtons
Forspecicationsandoperatingconditions,seepage18.
NetworkConnector
NO NO
NOTICE TICE
TICE
Theproductshallbeconnectedusingashieldednetworkcable(STP).Allcablesconnecting
theproducttothenetworkshallbeintendedfortheirspecicuse.Makesurethatthe
networkdevicesareinstalledinaccordancewiththemanufacturer’sinstructions.For
informationaboutregulatoryrequirements,seeElectromagneticCompatibility(EMC)on
page2.
Multi-connector
Terminalconnectorforconnectingthesuppliedmediaconverterswitch,whichprovidesthe
followingsignals:
•DCPower
•Network(Ethernet10/100Base-T)
•Input/Output(I/O)
Thesuppliedmulti-connectorcableisrequiredinordertomaintaintheproduct’sNEMA/IPrating.
Formoreinformation,seeMulti-ConnectorCableonpage15.
AXISQ60-SSeries
SDCardSlot
SupportsSDcardswithupto64GBofstorage.Forbestrecordingperformance,useanSDHC
orSDXCcardwithspeedclass10.
ControlButton
Forlocationofthecontrolbutton,seeHardwareOverviewonpage11.
Thecontrolbuttonisusedfor:
•Resettingtheproducttofactorydefaultsettings.Seepage31.
•ConnectingtoanAXISVideoHostingSystemserviceorAXISInternetDynamicDNS
Service.Formoreinformationabouttheseservices,seetheUserManual.
Multi-ConnectorCable
Note
Thesuppliedmulti-connectorcableisrequiredinordertomaintainthecamera’sNEMA/IP
rating.
Themulti-connectorcableisconnectedtothecamera’smulti-connector,seeHardwareOverview
onpage11.
Thewiresareconnectedtothesuppliedmediaconverterswitch,seeMediaConverterSwitch
onpage13.
Thecableprovidesthefollowingsignals:
•DCpowertocamera
•Network(Ethernet10/100Base-T)
•Input/Output(I/O)
ENGLISH
AXISQ60-SSeries
1
2
3
4
5
6
7
8
9
10
12 11
1 8
2 7
9
3 6
4 5
Multi-connectorcableoverview
1Powerwire(red)
2DigitalI/Owire(blue)
3Ethernetwire(green/white)
4Ethernetwire(green)
5Ethernetwire(orange/white)
6Ethernetwire(orange)
7DigitalI/Owire(yellow)
8Groundwire(black)
9Powerwire(red)
10Ethernetwirefoilshield(2x)
11Outerfoilshield
12Braidedshieldcoil
FunctionPin–wireNotesSpecications
Digitalinput–Connecttopin
8toactivate,orleaveoating
(unconnected)todeactivate.
0tomax30VDC
Congurable
(Inputor
Output)
2–blue
7–yellow
Digitaloutput–Connectedto
pin1whenactivated,oating
(unconnected)whendeactivated.If
usedwithaninductiveload,e.g.a
relay,adiodemustbeconnectedin
parallelwiththeload,forprotection
againstvoltagetransients.
0tomax30VDC,
opendrain,
100mA
RX+3–green/whiteEthernet–receiving
AXISQ60-SSeries
RX-4–greenEthernet–receiving
TX+5–orange/whiteEthernet–transmitting
TX-6–orangeEthernet–transmitting
0VDC(-)8–black0VDC
DCoutput
(12V)1,9–redUsedtopowercamera12–13.2VDC
MediaConverterSwitchConnectors
Forspecications,seepage18.
NO NO
NOTICE TICE
TICE
Theproductshallbeconnectedusingashieldednetworkcable(STP).Allcablesconnecting
theproducttothenetworkshallbeintendedfortheirspecicuse.Makesurethatthe
networkdevicesareinstalledinaccordancewiththemanufacturer’sinstructions.For
informationaboutregulatoryrequirements,seeElectromagneticCompatibility(EMC)on
page2.
Important
Themediaconverterswitchdoesnotsupporthotswapping.Disconnectpowerfromthe
switchbeforeswappingcameras.Anattempttohotswapcouldcausetheswitchtofreeze,
inwhichcaseitmustberestarted.
Powerconnector(DCinput)-2-pinterminalblockforpowerinput.
Powerconnector(DCoutput)-Two2-pinterminalblockforpoweroutput(pin4isnotused).
NetworkconnectorRJ45(external)-TwoRJ45connectors(10/100Base-T)fornetwork
connectivity.
NetworkslotSFP(external)-TwoSFPslots(100Base-FX/1000Base-X)fornetworkconnectivity.
EachRJ45andSFPporthasitsowndipswitch.Thedipswitchescontrolhowtheportforwards
data.Formoreinformation,seetheUserManual.
DipswitchpositionDescriptionofuse
Default(middle)BWhenconnectingtothenetwork,directlyorthrougha
routerornetworkswitch.
ENGLISH
AXISQ60-SSeries
LeftAWhenconnectingtoacameraoradevicethatisnot
intendedforviewingdata.
RightCWhenconnectingtoanothermediaconverterswitch.
Networkconnector(internal)-Two2-pinEthernetterminalblocks.
I/Oconnector(external)-6-pincongurableI/Oterminalblock,whichisconnectedtothe
camerathroughthemulti-connectorcable.Usewithexternaldevicesincombinationwith,for
example,tamperingalarms,motiondetection,eventtriggering,timelapserecordingandalarm
notications.Inadditiontothe0VDCreferencepointandpower(DCoutput),theI/Oconnector
providestheinterfaceto:
•Digitaloutput–ForconnectingexternaldevicessuchasrelaysandLEDs.
ConnecteddevicescanbeactivatedbytheVAPIX®ApplicationProgramming
Interface,outputbuttonsontheLiveViewpageorbyanActionRule.Theoutput
willshowasactive(shownunderSystemOptions>Port&Devices>Port
Status)ifthealarmdeviceisactivated.
•Digitalinput–Analarminputforconnectingdevicesthatcantogglebetween
anopenandclosedcircuit,forexample:PIRs,door/windowcontacts,glass
breakdetectors,etc.Whenasignalisreceivedthestatechangesandtheinput
becomesactive(shownunderSystemOptions>Port&Devices>PortStatus).
I/Oconnector(internal)-2–pinI/Oterminalblock.
Specications
OperatingConditions
TheAxisproductisintendedforoutdooruse.
ProductClassicationTemperatureHumidity
AXISQ6042-S
AXISQ6044-S
AXISQ6045-SMkII
IEC60721-4-3
Class3K3
IEC/EN60529IP66
ISO20653IP6K9K
-30°Cto50°C
(-22°Fto122°F)10–100%RH(con-
densing)
StorageConditions
TheAxisproductisintendedforoutdooruse.
AXISQ60-SSeries
ProductTemperature
AXISQ6042-S
AXISQ6044-S
AXISQ6045-SMkII
-40°Cto60°C
(-40°Fto140°F)
ElectricalSpecication
NO NO
NOTICE TICE
TICE
For conrmed compliance with the requirements for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS), use the power supply (sold separately) recommended by Axis.
ProductFunctionDescription
AXISQ6042-S
AXISQ6044-S
AXISQ6045-SMkII
Inputpower12VDC,max60W
Inputvoltage12.0–13.2VDC
Inputpower70W(min)
Availableoutputpower65W(min)
Mediaconverterswitch
Nominaloutputvoltage12.5VDC
123
70 W
65 W
60 W
1Mediaconverterswitch
2Multi-connectorcable
3Networkcamera
ENGLISH
AXISQ60-SSeries
Connectors
SDCardSlot
SupportsSDcardswithupto64GBofstorage.Forbestrecordingperformance,useanSDHC
orSDXCcardwithspeedclass10.
MediaConverterSwitchConnectors
ExternalConnectors
GroundScrewGroundscrewforconnectingthemedia
converterswitchtoearthground.Make
surethatbothendsofthegrounding
wireareincontactwiththeirrespective
groundingsurfaces.
Powerconnector
2-pinterminalblockforpowerinput.
-+
21
FunctionPinNotesSpecications
0VDC(-)10VDC
DCinput
12VDC2Powerinfrompower
supply(soldseparately)12.0-13.2VDC,
min75W
I/Oterminalconnector
6-pinterminalblocksfor:
•DigitalInput/Output
•Power(DCoutput)
•0VDC(-)
21 43 65
FunctionPinNotesSpecications
0VDC(-)1,4,60VDC
DCoutput2Powerout12VDC,50mA
AXISQ60-SSeries
Digitalinput0tomax30VDC
Congurable
I/O1(InputorOutput)
3
Digitaloutput(transistor–
opencollector)
0tomax30VDC,
opendrain,100mA
Digitalinput0tomax30VDC
Congurable
I/O2(InputorOutput)
5
Digitaloutput(transistor–
opencollector)
0tomax30VDC,
opendrain,100mA
CameraConnectors
Powerconnector
Two2-pinterminalblocksforpoweroutput(pin4
isnotused).
++
2143
-
FunctionPinNotesSpecications
12VDC1,2Powerouttocamera12.0-13.2VDC,
min70W
0VDC(-)30VDC
DC
output
N/a4N/a
Networkconnector
Two2-pinEthernetterminalblocks.
I/Oterminalconnector
2-pinterminalblock.
ENGLISH
AXISQ60-SSeries
InstalltheHardware
NO NO
NOTICE TICE
TICE
•Duetolocalregulationsortheenvironmentalandelectricalconditionsinwhichthe
productistobeused,ashieldednetworkcable(STP)maybeappropriateorrequired.
Allcablesconnectingtheproducttothenetworkandthatareroutedoutdoorsorin
demandingelectricalenvironmentsshallbeintendedfortheirspecicuse.Makesurethat
thenetworkdevicesareinstalledinaccordancewiththemanufacturer’sinstructions.For
informationaboutregulatoryrequirements,seeRegulatoryInformationonpage2.
•Mounttheproductwiththedomecoverfacingdownward.
•Becarefulnottoscratch,damageorleavengerprintsonthedomecoverbecausethis
coulddecreaseimagequality.Ifpossible,keeptheprotectiveplasticonthedomecover
untiltheinstallationiscomplete.
TheAxisproductcanbeinstalledwiththecablesroutedthroughoralongthewallorroof.
Readalltheinstructionsbeforeinstallingtheproduct.Someinstallationstepswouldbenetfrom
beingcompletedtogetherbecausetheyrequireremovalofthedomecover.
Ahardwareinstallationcanincludethefollowing:
•Theproductissuppliedwithacleardomecover(premounted).Asmokeddomecoveris
availableasanaccessory.Toreplacethedomecover,seepage22.
•AstandardorhighcapacitySDcard(notincluded)canbeusedtostorerecordingslocally
intheproduct.ToinstallanSDcard,seepage23.
•ToinstalltheproductusingaT91C61WallMount(soldseparately),seepage29.
AttachtheSunshield
Attachingthesunshieldisoptional.Thesunshieldhelpskeepthetemperatureinsidethecamera
down.
1.Removethescrewplugsfromthecameraunit.
2.Placethesunshieldonthecameraunit.
3.Securethesunshieldusingthesuppliedscrews.
ReplacetheDomeCover
Replacingthedomecoverisonlynecessaryifyouwanttouseasmokeddomecoverorifthe
domecoverisscratchedordamaged.Smokeddomecoversandsparecleardomecoverscanbe
purchasedfromyourAxisreseller.
UsetheInstallationGuidedeliveredwiththedomecover.
AXISQ60-SSeries
InstallanSDCard
ItisoptionaltoinstallanSDcard(notincluded),whichcanbeusedforlocalrecordingwith
removablestorage.
1.Loosenthedomeringscrewsandremovethedomecover.
2.InsertanSDcard(notincluded)intotheSDcardslot.
3.Attachthedomecovertothetopcoverandtightenthescrews(torque3.2Nm).
NO NO
NOTICE TICE
TICE
Topreventcorruptionofrecordings,theSDcardshouldbeunmountedbeforeitisejected.
Tounmount,gotoSetup>SystemOptions>Storage>SDCardandclickUnmount.
PressurizetheCamera(Recommended)
ThecamerahousingcanbelledwithNitrogengastopreventcondensation.
Thellingprocessisrepeatedthreetimes,releasingthepressurebetweenllings,tomakesurethat
allairandhumidityispurgedfromthehousing.
Note
Thecamerahousinghasanpressurereliefvalvethatlimitsthellingpressureto0.5bar
(7psi).Duringnormalusethepressureinsidethecamerahousingmaydropbelowthat
pressure.Forfullprotectionmakesurethatthepressureisabove0.2bar(3psi).
1.Settheregulatorgaugeonthegascylinderto0.5bar(7psi).
2.Removethecapsfromtheinletvalveandthepressurereliefvalve.
3.Placethechuckontheinletvalveandpressdowntollthecamerawithnitrogen.
4.Whenthepressureinsidethecamerahousingreaches0.5bar(7psi)thepressurerelief
valvewillopen.Placeyourhandoverthepressurereliefvalvetoverifythatthegas
isowingout.
5.Keepthegasowingthroughthecamerahousingforoneminutebeforeremovingthe
chuckfromtheinletvalve.
6.Liftthepressurereliefvalvetolettheoverpressureoutofthecameraunit.
7.Repeatthellingprocessatotalof3times,leavingthethecamerapressurizedthe
lasttime.
8.Putthecapsbackontheinletvalveandthepressurereliefvalve.
InstallthePowerSupplyandtheMediaConverterSwitch
Thesuppliedmediaconverterswitchenablesthemulti-connectorcabletosendpowerfromthe
powersupply(soldseparately)andtosendandreceivedatatoandfromexternalalarmdevices
andthenetwork.
ENGLISH
/