Hatteland Technology HT B30Gx STC-xxx-Mxxxxx User manual

HT B30Gx STC-xxx-Mxxxxx
Hatteland Technology
Brand
Hatteland Technology
Model
HT B30Gx STC-xxx-Mxxxxx
Type
User manual

This manual is also suitable for

Please visit www.hattelandtechnology.com for the latest electronic version of this manual.
USER MANUAL
HT B30Gx STC-yzz-Mzzzzz (Long Depth Model)
HT B30Gx STC-yzz-Mzzzzz (Long Depth Model) - HW00
HT B30Kx STC-yzz-Ezzzzz (Short Depth Model)
where “x” is CPU type, “y” = Operating System (OS) type,
“z” = hardware configuration dependent
Compact / Ultra Compact Fanless Computer
User Manual HT B30
Updated: 02 Oct 2020 Doc Id: INB100610-3 (Rev 02)
Created: 363 Approved: 6987
Copyright © 2020 Hatteland Technology AS
Eikeskogvegen 52, N-5570 Aksdal, Norway.
All rights are reserved by Hatteland Technology AS. This information may not, in whole or in part, be
copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Technology AS. Review also:
www.hattelandtechnology.com/hubfs/pdf/misc/doc100703-1_permission_to_create_user_manuals.pdf
The products described, or referenced, herein are copyrighted to the respective owners.
The products may not be copied or duplicated in any way. This documentation contains proprietary
information that is not to be disclosed to persons outside the user’s company without prior written consent
of Hatteland Technology AS.
The copyright notice appearing above is included to provide statutory protection in the event of
unauthorized or unintentional public disclosure.
All other product names or trademarks are properties of their respective owners !
WARNING: This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Statement above last revised 31 Jul. 2019
3
IND100206-30
Contents
Contents .................................................................................... 3
Contents of package ...................................................................................7
General ...................................................................................... 9
About this manual ......................................................................................10
About Hatteland Technology .....................................................................10
www.hattelandtechnology.com ..................................................................10
Contact Information ...................................................................................10
HT B30 Computers introduction ................................................................11
Product Labelling .......................................................................................12
Installation ............................................................................... 13
Installation and mounting of computers ..................................................... 14
Cables .......................................................................................................15
Housing / Terminal Block Connector Overview .........................................16
Accessible Storage Device removal / replacement HT B30G ...................18
Mounting Bracket Kit (Wall / Desktop) HT B30G (Long Depth Models) ....19
Mounting Bracket Kit (Wall / Desktop) HT B30K (Short Depth Models) ....20
Mounting Guidelines and tips ....................................................................21
Physical Overview - HT B30xx STC-xxx-xxxxxx ......................................22
Front area of HT B30G (Long Depth Model) ........................................................... 22
Connector area of HT B30G (Long Depth Model) ................................................... 22
Front area of HT B30G (Long Depth Model) - HW00 .............................................. 23
Connector area of HT B30G (Long Depth Model) - HW00 ...................................... 23
Front area of HT B30K (Short Depth Model) ........................................................... 24
Connector area of HT B30K (Short Depth Model) ................................................... 24
Front User Controls & Unit Operation - HT B30G (Long Depth Model) ................... 25
Front User Controls & Unit Operation - HT B30G (Long Depth Model) - HW00 ..... 26
Rear User Controls & Unit Operation - HT B30K (Short Depth Model) ................... 27
Connectors & Connectivity (All models) .................................................................. 28
Module Expansion Matrix ..........................................................................32
Factory Standards .....................................................................................32
COM Ports Numbering .............................................................................35
Contents
4
IND100206-30
Specications ......................................................................... 37
Specications - HT B30Gx STC-xxx-Mxxxxx ............................................38
Specications - HT B30Gx STC-xxx-Mxxxxx (HW00) ...............................39
Specications - HT B30Kx STC-xxx-Exxxxx .............................................40
Specications - CAN Module with CO-Processor .....................................41
ZIA0001310-B ......................................................................................................... 41
Specications - CAN Module with CO-Processor .....................................42
ZIA0001310-SLCAN ................................................................................................ 42
Specications - NMEA / IEC COM Module RS-422 / RS-485 ...................43
PCA200828-1 .......................................................................................................... 43
Specications - Isolated Digital Input/Output Module ................................47
PCA100297-1 .......................................................................................................... 47
Specications - LAN Module .....................................................................49
PCA100298-1 .......................................................................................................... 49
Specications - Isolated COM Module RS-232 .........................................50
PCA100309-1 .......................................................................................................... 50
Specications - External Modules (USB) ..................................................51
Technical Drawings ................................................................ 53
Technical Drawings - HT B30Gx STC-xxx-Mxxxxx....................................54
Technical Drawings - HT B30Gx STC-xxx-Mxxxxx (HW00) ......................55
Technical Drawings - HT B30Kx STC-xxx-Exxxxx.....................................56
Contents
5
IND100206-30
Technical Drawings - Accessories ........................................ 57
Technical Drawings - Mounting Bracket Kit - HT B30G .............................58
HT MBK STD-A1 ..................................................................................................... 58
Technical Drawings - Mounting Bracket Kit - HT B30K .............................59
HT MBK STD-A2 ..................................................................................................... 59
Technical Drawings - Cable Retainer/Relief Kit .........................................60
HT RET STD-A1 ...................................................................................................... 60
Technical Drawings - 2U Rack Mount Kit ..................................................61
HT RMK STD-A1 ..................................................................................................... 61
Technical Drawings - 2U Rack Mount Kit w/handles .................................62
HT RMK STD-H1 ..................................................................................................... 62
Technical Drawings - 19 inch Rack Mount Kit ...........................................63
HT SRK STD-A2 (with 1 x HT B30) ......................................................................... 63
HT SRK STD-A2 (with 2 x HT B30) ......................................................................... 64
Packaging Instructions HT SRK STD-A2 ................................................................ 65
Technical Drawings - 19 inch Rack Mount Kit ...........................................66
HT SRK STD-A1 ..................................................................................................... 66
Technical Drawings - Mounting Rails Kit 20 inch ....................................... 67
SF-41-20 .................................................................................................................. 67
Technical Drawings - Mounting Rails Kit 26 inch ....................................... 68
SF-41-26 .................................................................................................................. 68
Technical Drawings - Mounting Plate/Cable Tension Relievers ................69
for HT B30G (w/HT 00228 OPT-A1) ........................................................................ 69
Technical Drawings - Mounting Plate/Cable Tension Relievers ................70
for HT B30K (w/HT 00228 OPT-A1) ........................................................................ 70
Technical Drawings - External Modules (USB) .......................................... 71
Contents
6
IND100206-30
Appendixes ............................................................................. 73
Pinout Assignments ...................................................................................74
SSD Selection Guide .................................................................................77
ATX / AT Power Modes .............................................................................. 80
BIOS - How to create RAID volume ..........................................................81
Trusted Platform Module (TPM) 2.0 ..........................................................85
TDP (Thermal Design Power) ...................................................................86
Display Output Behavior ............................................................................87
DisplayPort (DP++) Output Note ...............................................................88
Secure Boot ...............................................................................................89
Battery Status and Alarm ...........................................................................90
WakeOnLan (WOL) function .....................................................................91
BIOS Settings Overview ............................................................................98
Trouble-shooting ...................................................................................... 105
BIOS HOT-KEYS Functions ....................................................................106
Notes .......................................................................................................107
Declaration of Conformity ........................................................................108
Return Of Goods Information ..................................................................109
General Terms and Conditions ................................................................ 110
Revision History ......................................................................................112
7
IND100207-19
Item Description Illustration
TP52/TC01-1,8M
1 x Power Cable (Black) European Type F “Schuko” to IEC.
Length: 1.8m (5.9 ft)
Applicable only for models with AC Power Input (HT B30Gx models)
EUR TYPE F
IEC
TP11/TC01-1,8M
1 x Power Cable (Black) US Type B plug to IEC.
Length: 1.8m (5.9 ft)
Applicable only for models with AC Power Input (HT B30Gx models)
US TYPE B
IEC
Test Reports papers:
1 x Product Declaration
1 x Computer Checklist
1 x BurnInTest Certificate
HT MBK STD-A1
Mounting Bracket Kit suitable for Wall or Desktop mounting, consists of:
2 x P020079 (L shape mounting bracket - HTB30 long)
6 x FDA04001-QB (M4x8 Black Torx DIN7046 Stainless Steel with nylon thread lock)
6 x M5 Locking Nut DIN985 (Locking Nut)
6 x M5,3 skive DIN 125 (Washer)
6 x 145 050x020 A4-80B (M5x20 Unbrako DIN912 Black)
Applicable only for Long Depth Models (HT B30G).
HT MBK STD-A2
Mounting Bracket Kit suitable for Wall or Desktop mounting, consists of:
2 x P020051 (L shape mounting bracket - HTB30 short, 5052-H32)
6 x FDA04001-QB (M4x8 Black Torx DIN7046 Stainless Steel with nylon thread lock)
6 x M5 Locking Nut DIN985 (Locking Nut)
6 x M5,3 skive DIN 125 (Washer)
6 x 145 050x020 A4-80B (M5x20 Unbrako DIN912 Black)
Applicable only for Short Depth Models (HT B30K).
HT RET STD-A1
Cable Retainer/Relief Kit which consists of:
1 x for DisplayPort (DP) / HDMI
1 x for USB
1 x for all other general cables.
Screws: 3 pcs M3x4 DIN 965-10.9 Torx BLANK + 3 pcs M3x4 DIN 965-10.9 Torx BLANK
Applicable for both Long Depth (HT B30G) and Short Depth (HT B30K) models.
Terminal Block Connectors
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
1 x 2-pin Terminal Block 5.08 for DC Power In (for HT B30G models)
2 x 2-pin Terminal Block 5.08 for DC Power In (for HT B30K models)
Refer to “Conguring Housing / Terminal Block Connector” section for usage.
Contents of package
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Contents of package
8
IND100207-19
Package may also include: (based on accessories/options ordered)
Item Description Illustration
Terminal Block Connectors
Depending on factory mounted options, Terminal Bracket Connector kit as follows:
4 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 NMEA COM (PCA200828-1)
4 x 4-pin Terminal Block 3.81 for CAN Interface (ZIA0001310-B)
4 x 5-pin Terminal Block 3.81 for Digital Input/Output (PCA100297-1)
HT RMK STD-A1
Rack Mount Kit (2U Rack Mount) contains:
2 x 2U Rack bracket
4 x M4x10 CSK Torx DIN7984
Note: Can be mounted on front or back of unit, depending on installation needs.
Applicable for both Long Depth (HT B30G) and Short Depth (HT B30K) models.
HT RMK STD-H1
Rack Mount Kit w/handles (2U Rack Mount) contains:
2 x 2U Rack bracket
2 x 3299.1231 - MENTOR handle 75,5mm
8 x M4x10 CSK Torx DIN7984
Applicable for both Long Depth (HT B30G) and Short Depth (HT B30K) models.
HT SRK STD-A2
19 inch Rack Mount Kit (suitable for 1 or 2 x HT B30G/K side-by-side) contains:
1 x 19 inch Rack - slide shelf (A010645)
2 x 2U Rack bracket (P020660, AISI Type 316L stainless steel)
8 x M4x6 Countersunk Torx
4 x M4x10 Countersunk Torx
1 x HT SRK STD-A2 Shelf bracket (P022975, AISI Type 316L stainless steel)
Supports Mounting Rails Kit SF-41-20 (20 inch) and SF-41-26 (26 inch)
Applicable for both Long Depth (HT B30G) and Short Depth (HT B30K) models.
Example 1 x HT B30
Example 2 x HT B30
HT SRK STD-A1
Note: Item obsoleted Q1/2020. Replaced by HT SRK STD-A2 above.
HT SRK STD-A1 was suitable for HT B30G - HW00 models.
19 inch Rack Mount Kit (suitable for 2 x HT B30G/K side-by-side) contains:
1 x 19 inch Rack - slide shelf
2 x 2U Rack bracket
8 x M4x6 Countersunk Torx
4 x M4x10 Countersunk Torx
Supports Mounting Rails Kit HT 00224 OPT-A1 (20 inch) and HT 00225 OPT-A1 (26 inch)
Applicable for both Long Depth (HT B30G) and Short Depth (HT B30K) models.
HT 00228 OPT-A1
Kit contains:
1 x Mounting Plate with cable relief, RAL 9011.
6 x M4x8 (Torx ISO 7046 Black A4 Stainless Steel) screws
(additional screws may be provided for similar computer models, please use M4x10 for HT B30).
Applicable for both Long Depth (HT B30G) and Short Depth (HT B30K) models.
HT 00300 MSOS IMAGE-Axx
Recovery/Restore Kit (1 x USB Memory Stick with original installation).
For reverting back to factory/customized Operating System installations.
For more information, visit:
https://www.hattelandtechnology.com/options-for-downgrade-upgrade-change-or-add-of-microsoft-windows
Note: Only applicable for factory delivered units with Storage Devices installed.
?
For computers that include 3rd party hardware; the package / accessories box may also include
additional CD / HW / Information from 3rd party supplier(s) depending on customized order.
9
General
10
Hatteland Technology AS
IND100077-1
General
About this manual
The manual contains electrical, mechanical and input/output signal specications. All specications in this manual,
due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last updated
and revision date of this manual are shown both on the frontpage and also in the “Revision History” chapter. This
user manual is a standard/general manual that applies to all variations of its product family, i.e. deviation from actual
conguration may exist.
About Hatteland Technology
Hatteland Technology is the leading technology provider of specialized display and computer products, delivering high
quality, unique and customized solutions to the international maritime, naval and industrial markets.
The company represents innovation and quality to the system integrators worldwide. Effective quality assurance and
investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil
tested products. Our customer-oriented approach, technical knowledge and dedication to R&D, makes us a trusted
and preferred supplier of approved solutions, which are backed up by a strong service network.
www.hattelandtechnology.com
You will nd our website full of useful information to help you make an informed choice as to the right product for your
needs. You will nd detailed product descriptions and specications for the entire range on Displays, Computers and
Panel Computers, Military solutions as well as the range of supporting accessories. The site carries a wealth of
information regarding our product testing and approvals in addition to company contact information for our various
ofces around the world, the global service locations and the technical help desk, all ensuring the best possible
support wherever you, or your vessel, may be in the world.
Contact Information
Head ofce, Aksdal / Norway:
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal, Norway
Switchboard:
Tel: +47 4814 2200
mail@hattelandtechnology.com
Sales ofce, Frankfurt / Germany:
Hatteland Technology GmbH
Werner Heisenberg Strasse 12,
D-63263 Neu-Isenburg, Germany
Uwe Scheumann:
Tel: +45 2463 9565
Elke Freisens:
Tel: +49 173 6174753
Goetz Vogelmann: (Sales Director ASIA)
Tel: +49 (0) 6102 37 09 54
Sales ofce, Oslo / Norway:
Hatteland Technology AS
Strandveien 35
N-1366 Lysaker
Norway
Switchboard:
Tel: +47 4814 2200
mail@hattelandtechnology.com
Sales ofce, Aix-en-Provence / France:
Hatteland Technology SAS
Actimart- 1140, rue Ampère, CS 80544
13594 Aix-en-Provence, Cedex 3
France
Mehdi Bounoua (Sales Director Europe, Middle East & Africa):
Tel : +33 6 88 33 64 93
Sales ofce, Vista / USA:
Hatteland Technology Inc
450 South Melrose Drive,
Suite #107
Vista, CA 92081
USA
Donna Pallonetti:
Tel: +1 858-282-0659
Fax: +1 858-408-1834
For an up-2-date list, please visit https://www.hattelandtechnology.com/contact
11
Computers
IND101057-19
General
HT B30 Computers introduction
The HT B30 range is based on the latest Intel chipset and Skylake processor
platform, delivering even more power for maritime technology developers to
design and build high-end vessel control and monitoring solutions that enable
safer and more effecient maritime operations.
HT B30 computers are available in two new form factors, short depth and long
depth, allowing for flexible installation options including 3U rack mounting in
pairs. Using the same system architecture as Hatteland Technology’s new,
second generation Series X Panel Computers, the HT B30 range offers
significant processing speed and graphical performance improvements, which
when combined with multiple-drive solid state storage and silent, fanless
operation, positions them among the most advanced computing platforms for
maritime applications.
Hatteland Technology offers a choice of three Intel Core processors, up to i7,
for its HT B30 computers. Graphical output is handled by 1 x DVI-I, 1 x DVI-D
and 1 x Display Port (DP) while standard interfaces include 4 x Ethernet Ports,
4 x USB2.0 and 4 x USB3.0. The HT B30 platform also supports a wide range
of interface modules such as CAN/NMEA COM/COM and DIO, ensuring it is
ready of-the-shelf for all maritime applications. In addition, HT B30 features a
lightweight, fully enclosed aluminium chassis and comes with either Dual DC or
Hatteland Technology’s Multi-power system (both AC and DC power built in).
While the silent operation of fanless computers can improve the bridge working
environment, the fact that there are no moving parts inside is the key benefit,
as this prolongs lifetime and reduces service costs while contributing to the
reliability and availability of critical systems on board.
By boosting the power of these high-end computers, we are providing an even
more advanced platform for the maritime technology industry to create solutions
that meet the on board control, monitoring and data needs of both ship owners
and crew.
12
IND100240-14
General
Product Labelling
Serial Number Label Layout
Serial Number Label Placement (external)
Label Size: 6cm x 2cm. Silver background with black text
Barcode “128” (TYP+SNO)
Compass Safe Distance info
Product Type
Input Voltages & Power Rating
Manufactured Date yyyymmdd
Manufacturer & Country
Please note that typenumber shown above is a generic sample only. May not reect products mentioned in this manual. Please review
actual product S/N label.
Rear Side of unit
HT B30G (Long Depth)
Front Side of unit
HT B30K (Short Depth)
Label Size and Types
ID Label Layout Description Specication
Type : Serial Number Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Note: Text content of label will match specications
derived from Data Sheet.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly dened as ISO/IEC 15417:2007.)
Type : Operating System (OS) label.
Size : 70mm wide x 23mm high (rectangle size)
Note: Label only present if OS was part of factory
option order. Linux OS does not have any label.
As per delivered from supplier.
Label applies for:
Windows® 7 Professional
Windows® 7 Ultimate
Type : Operating System (OS) label.
Size : 22mm wide x 9mm high (rectangle size)
Note: Label only present if OS was part of factory
option order. Linux OS does not have any label.
As per delivered from supplier.
Label applies for:
Windows® Emb. Standard 7
Windows® 10 IoT Enterprise
Type : Quality Control (QC) Label
Size : 30mm wide x 23mm high (oval size)
This label indicates that the unit is produced, tested and
packed according to the manufacture’s QA specications.
It will include a Personal ID and signature by the
personnell responsible for approving the unit in
production, test and warehouse departments.
Ordinary sticker with glue on
back.
Only present if the unit was delivered with factory installed Operating System (OS) such as
Microsoft® Windows® Embedded Enterprise. The same Product Key is also printed on the
“Product Declaration” sheet that follows the unit, check contents of package. Note: For certain OS,
there is no physical Product Key Label required or a Product Key Number that must be entered
during installation / usage of the unit.
13
Installation
14
Installation
IND100210-12
General Installation Recommendations
Installation and mounting of computers
1. Units may be intended for various methods of installation or mounting (rack mounting, panel mounting,
bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings.
2. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must
denitely be kept clear; coverings which restrict ventilation are not permissible. The product might be without
any ventilation aperatures, in which the cooling chassis design will allow heat to dissipate properly away
from the unit instead. Make sure you allow space around for the heat to excess properly.
3. Exposure to direct sunlight can cause a considerable increase in the temperature of the unit, and might under
certain circumstances lead to overtemperature. This point should already be taken into consideration when
the bridge equipment is being planned (sun shades, distance from the windows, ventilation, etc.)
4. Space necessary for ventilation, for cable inlets, for the operating procedures and for maintenance, must be
provided.
5. To further improve the cooling of the unit we recommend installing Cooling Fans underneath blowing upwards
into the unit air inlet. This may be required in high temperature applications and also when there is reason to
expect temperature problems due to non-optimal way of mounting.
6. Products with AC input shall be grounded to protective Earth (Safety Ground) when necessary via the bolt
(usually on terminal plate) available on the product.
Products with DC input shall be grounded to protective Earth (Safety Ground) via the bolt (usually on terminal
plate) available on the product.
A shorter and thicker cable gives better grounding. A 6mm² is recommended, but a 4mm² or even 2.5mm² can
be used for this purpose.
7. Expose to heavy vibration and acoustic noise might under certain circumstances affect functionality and
expected lifetime. This must be considered during system assembly and installation. Mounting position must
be carefully selected to avoid any exposure of amplied vibration.
General mounting instructions
1. The useful life of the components of all Electronics Units generally decreases with increasing ambient
temperature; it is therefore advisable to install such units in air-conditioned rooms. If there are no such
facilities, these rooms must at least be dry, adequately ventilated and kept at a suitable temperature in order
to prevent the formation of condensation inside the unit.
2. With most Electronic Units, cooling takes place via the surface of the casing. The cooling must not be
impaired by partial covering of the unit or by installation of the unit in a conned cabinet.
3. In the area of the wheel house, the distance of each electronics unit from the magnetic standard compass or
the magnetic steering compass must not be less than the permitted magnetic protection distance. This
distance is measured from the centre of the magnetic system of the compass to the nearest point on the
corresponding unit concerned. The exact distance is often mentioned in the specic product specications.
4. Transportation damage, even if apparently insignicant at rst glance, must immediately be examined and be
reported to the freight carrier. The moment of setting-to-work of the equipment is too late, not only for
reporting the damage but also for the supply of replacements.
5. The classication is only valid for approved mounting brackets provided by Hatteland Technology. The unit
shall be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type
of mounting might require test and re-classication.
15
General Installation Recommendations
Installation
IND100210-12
Cables
Use only high quality shielded signal cables. For RGB/DVI/DP/HDMI cables use only cables with separate coax for
Red, Green and Blue.
16
General Installation Recommendations
Installation
IND100210-14
Housing / Terminal Block Connector Overview
Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plug into the
connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal
block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these
connectors, but note that the warranty will be void if any damage would occur to either the unit’s original PCB terminal
socket connector or inside the unit (electronic components, boards etc.). The table below is applicable for any Series
X products, such as Display and Panel Computers, including newer type of Stand-Alone Computers.
Illustration Pins Manufacturer Details Connector used for module
5-pin MC 1,5/ 5-STF-3,81
Screwdriver: SZS 0,4X2,5mm
VDE, slot-headed.
Tightening torque min. 0.22 Nm.
Tightening torque max 0.25 Nm.
• RS-422 / RS-485 NMEA
(PCA200828-1 / PCA100293-1 / Q170 IO)
• Digital Input/Output (PCA100297-1 / Q170 IO)
Identi ed on Hatteland Technology product datasheet as:
“Terminal Block 3.81”
2-pin MSTB 2,5/ 2-STF-5,08 BK
Screwdriver: SZS 0,6x3,5, slot-
headed.
Tightening torque min. 0.5 Nm.
Tightening torque max 0.6 Nm.
• DC Power IN (24VDC) - Dual Input
Identi ed on Hatteland Technology product datasheet as:
“Terminal Block 5.08”
4-pin BCZ 3.81/04/180F SN BK BX
Screwdriver: 0.4x2.5mm DIN 5264.
Tightening torque min.. 0.2 Nm.
Tightening torque max. 0.25 Nm.
• CAN Interface (ZIA0001310-B)
Identi ed on Hatteland Technology product datasheet as:
“Terminal Block 3.81”
If your installation requires additional cable fasteners support, please visit and purchase directly from manufacturer:
Illustrations below are approximate, actual Housing and Hood may deviate slightly, but function remains the same.
Cable Housing - Illustration Cover Hood - Illustration
KGG-MSTB 2,5/ 2 (2-pin)
KGG-MC 1,5/ 5 (5-pin)
BCZ 3.81 AH04 BK BX (4-pin)
BCZ 3.81 AH05 BK BX (5-pin)
For 2-pin and 5-pin:
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1803934&library=usen&pcck=P-11-02-01&tab=1
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1834372&library=usen&pcck=P-11-02-01&tab=1
For 4-pin and 5-pin
http://catalog.weidmueller.com/procat/Product.jsp;jsessionid=B040D5EB6832629E567C884809FDF6C1?productId=(%5b1005290000%5d)
http://catalog.weidmueller.com/procat/Product.jsp;jsessionid=D399022A1B3211C0146BCBE716D93211?productId=(%5b1005300000%5d)
17
General Installation Recommendations
Installation
IND100210-14
Conguring Housing / Terminal Block connectors
Below is a brief illustration that might be useful during conguration and installation of such connectors. You will need
suitable pre-congured cable(s) and tools to congure the connector(s) and cable(s) that are present in your
installation environment. Below is a sample procedure for a 2-pin DC power connector. The procedure is the same for
other connectors of this type as listed in table above. Unit used as illustration below is for reference only.
FIG 5
FIG 1
FIG 4
FIG 6
FIG 2
FIG 3
Requires assembly. It is expected that the technician has experience in electronics and
assembling cables and connectors.
Warning: Do not connect or disconnect cables/connectors to the unit’s connector while the unit is powered on. Failure to do so may result in
damaged electronics.
FIG 1: Unscrew (from top) or make sure that the screw terminal is fully open, so you can secure the inserted cables
correctly to the loose housing connector (it may already be plugged into the unit as per factory installation).
FIG 2: Strip carefully the insulation from the cable to expose the wire(s) inside.
FIG 3: Ensure that the wire(s) is without any loose threads to ensure good connection.
FIG 4: Insert cables* (from front) and screw / secure the cables by turning the screw on top of the housing to secure
the cables properly. Check that the cables are rmly in place and do not appear loose or fall out when pulling gently.
*Note: Required polarization verication (for instance -/+ for DC power input) should conform with the markings on
the connector area of the unit. Ignoring the markings on the unit or its add-on modules might damage the unit and/or
external equipment in which end, warranty will be void.
FIG 5: Plug the housing into the appropriate connector area of the unit (glass should be facing down) and check again
that the cables secured conform with the markings on the connector area of the unit. Finalize the installation by
fastening the screws located in front on each side of the housing connector (FIG 6).
Connector / Function Recommended Cable Thickness
2-pin DC Power Input (Terminal Block 5.08) Minimum 20 AWG - Maximum 18 AWG
4-pin CAN (Terminal Block 3.81) Minimum 22 AWG - Maximum 20 AWG
5-pin NMEA COM (Terminal Block 3.81) Minimum 22 AWG - Maximum 18 AWG
5-pin DIO (Terminal Block 3.81) Minimum 22 AWG - Maximum 18 AWG
18
IND100210-37
General Installation Recommendations
Installation
Accessible Storage Device removal / replacement HT B30G
Note: Applies only for HT B30G (Long Depth Models). Areas of interest are marked in this section with symbols in
RED color. Although the trays are Hot-Swappable, it is considered to be a good practice to power off the unit and
disconnect power cable before proceeding!
▼ 1: Locate the tray you want to remove/replace and unscrew the two Thumbscrews with ngers or a screwdriver
that holds the front hatch and tray in place. Then extract the tray fully out of the unit.
▼ 2: Unscrew or screw 4 pcs x M3x4mm Phillips (cross-recessed) countersunk head screws as indicated. Replace
or remove the device as needed. Use Torque Force 0.8nM to fasten.
- Repeat the procedure backwards to nalize operation -
19
IND100210-37
General Installation Recommendations
Installation
Mounting Bracket Kit (Wall / Desktop) HT B30G (Long Depth Models)
Mounting Bracket Kit (HT MBK STD-A1) is included with delivery. Note: Areas of interest are marked in this section
with symbols in RED color.
Note: In order to secure the unit properly, please use only the screws delivered with the unit. Choosing own screws
and longer than factory specied may cause permanent damage inside the unit and Warranty will be void !
Item Amount Art Description
2 P020079 L shape mounting bracket - HTB30 long
6 FDA04001-QB M4x8 Black Torx DIN7046 Stainless Steel with nylon thread lock
6 M5 Locking Nut DIN985 Locking Nut
6 M5,3 skive DIN 125 Washer
6 145 050x020 A4-80B M5x20 Unbrako DIN912 Black
▼ 1: Prepare the brackets, one on each side of the
unit as indicated. Make sure the bracket is rotated
correctly by aligning as red line show below.
▼ 2: Mount each bracket onto lower part of unit, using
3 pcs M4x8 Black Torx DIN7046 on each side of the unit. Use
Torque Force: 2.0 Nm
▼ 3: Place the complete unit onto your desired
location (i.e. desktop/wall) and mark the positions
you need to drill. The drilling hole should be M5.
The space under the location should allow for M5
locking nuts. Max thickness of mounting area/
plate is 8mm. If your mounting area/plate is thicker,
please assure you acquire longer screws specied
as “M5x20 or larger Unbrako DIN912 Black”. View
below is TOP VIEW.
▼ 4: Finalize the mounting of complete unit onto your location
using 6 pcs M5x20 Unbrako DIN912 Black (#1) with 6 pcs
M5,3 washer DIN125 (#2) and 6 pcs M5 Locking Nut DIN985
(#3) at the bottom as illustrated. Veriy using hands to pull
and slide the unit to conrm it is secured tigthly onto location.
Use Torque Force: 3.75 Nm.
#1
#2
#3
20
IND100210-37
General Installation Recommendations
Installation
Mounting Bracket Kit (Wall / Desktop) HT B30K (Short Depth Models)
Mounting Bracket Kit (HT MBK STD-A2) is included with delivery. Note: Areas of interest are marked in this section
with symbols in RED color.
Note: In order to secure the unit properly, please use only the screws delivered with the unit. Choosing own screws
and longer than factory specied may cause permanent damage inside the unit and Warranty will be void !
Item Amount Art Description
2 P020051 L shape mounting bracket - HTB30 short, 5052-H32
6 FDA04001-QB M4x8 Black Torx DIN7046 Stainless Steel with nylon thread lock
6 M5 Locking Nut DIN985 Locking Nut
6 M5,3 skive DIN 125 Washer
6 145 050x020 A4-80B M5x20 Unbrako DIN912 Black
▼ 1: Prepare the brackets, one on each side of the
unit as indicated. Make sure the bracket is rotated
correctly by aligning as red line show below.
▼ 2: Mount each bracket onto lower part of unit, using
3 pcs M4x8 Black Torx DIN7046 on each side of the unit. Use
Torque Force: 2.0 Nm
▼ 3: Place the complete unit onto your desired
location (i.e. desktop/wall) and mark the positions
you need to drill. The drilling hole should be M5.
The space under the location should allow for M5
locking nuts. Max thickness of mounting area/
plate is 8mm. If your mounting area/plate is thicker,
please assure you acquire longer screws specied
as “M5x20 or larger Unbrako DIN912 Black”. View
below is TOP VIEW.
▼ 4: Finalize the mounting of complete unit onto your location
using 6 pcs M5x20 Unbrako DIN912 Black (#1) with 6 pcs
M5,3 washer DIN125 (#2) and 6 pcs M5 Locking Nut DIN985
(#3) at the bottom as illustrated. Veriy using hands to pull
and slide the unit to conrm it is secured tigthly onto location.
Use Torque Force: 3.75 Nm.
#1
#2
#3
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114

Hatteland Technology HT B30Gx STC-xxx-Mxxxxx User manual

HT B30Gx STC-xxx-Mxxxxx
Hatteland Technology
Brand
Hatteland Technology
Model
HT B30Gx STC-xxx-Mxxxxx
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents