Astonica 50104036 User manual

Brand: Astonica

Model: 50104036

Type: User manual

Astonica 50104036 is a 42-inch patio table designed for outdoor use. The table is made of durable materials that are resistant to heat-induced coloration changes, scratching, or alteration due to normal use or weathering. It features a sturdy construction with four legs that are attached to two center support rings for added stability. The table is easy to assemble and can be used for a variety of purposes, such as dining, entertaining, or relaxing. With its stylish design and durable construction, the Astonica 50104036 is a great addition to any outdoor living space.

OUTDOOR LIVING

Lisbon 42" Patio Table

Instruction Manual

Read the Instructions and Precautions before use of this product

MODEL NO: 50104036

Limited Warranty

World Factory, Inc.® Products for Home Use

World Factory, Inc.® (Seller) warrants to the original Buyer only, that each Astonica™ Product will be free

from defects in material and workmanship for a period of one (1) year from date of purchase. SELLER’S

SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL

BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN

MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN

MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR

ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT

OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to

damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering. To

make a claim under this Limited Warranty, you must return the complete product, transportation prepaid, to

any World Factory, Inc.® authorized service center. Call 1-888-424-3354 for the location of the nearest

authorized service center.

Additional Limitations

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED

TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR

FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,

ARISING FROM THE SALE OR USE OF THIS PRODUCT.

If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such provision

shall not affect any other provision herein, this Limited Warranty shall be construed as if such invalid and/or

unenforceable provision had never been contained herein.

This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior

agreements, arrangements, or understandings between the parties relating to product warranty.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

Please keep this instruction manual for future reference

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

Made In China

World Factory, Inc.

Southlake, TX 76092

General household tools will be needed for assembly.

1. Begin by mounting the legs (C) to the two center support rings (B)

with the nuts (E) (Figure 1).

2. Holding one of the legs (C) and one support ring (B) together so that

the support ring threaded stud lines up with the hole in the tab

mounted on the leg. Slide the stud through the tab hole.

3. Screw 1 nut (E) onto the bolt until hand-tight.

4. Repeat steps 2 and 3 with the other support ring.

5. Repeat steps 2 - 4 with the other three legs.

6. At this point all four legs should be attached to the two center

support rings

7. Place tabletop (A) upside down on a non-scratching surface such

as the table box, carpet, blanket or large towel (Figure 2).

8. Turn the leg assembly upside down, and place the legs against

the tabletop (A) so that the four holes in the tops of the legs slide

onto the four threaded studs mounted underneath. Thread a

wing nut (D) onto each one, and tighten securely.

9. Tighten each of the nuts (D) attaching the legs to the support rings

securely to ensure stability.

10. Have someone help you turn the table right side up.

PARTS & HARDWARE LIST

A  Table Top 1

B  Center Support Ring 2

C  Table Leg 4

D  Wing Nut 4

E  Nut 8

PART # DESCRIPTION QUANTITY

ASSEMBLY INSTRUCTIONS

FIGURE 1

FIGURE 2

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

Carefully remove the contents from the package.

If any parts are missing do not attempt to use the product until they

have been obtained and correctly installed.

Astonica 50104036 User manual

Astonica 50104036 User manual

Astonica 50104036 User manual

Related papers

Other documents