Astonica 50105395 User manual

Type
User manual
OUTDOOR LIVING
Read the instructions and precautions before use of this product
MODEL NO: 50105395
Please keep this instruction manual for future reference
Made in China
©2003 Distributed by:
World Factory, Inc.
®
Southlake, TX 76092
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Limited Warranty
World Factory, Inc.® Products for Home Use
World Factory, Inc.
®
(Seller) warrants to the original Buyer only, that each Astonica™ Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE,
WHICH ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY
THE SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR
INDIRECTLY FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS;
IMPROPER MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED
WARRANTY. This warranty does not apply to damage, heat-induced coloration changes, scratching or
alteration due to normal use or weathering. To make a claim under this Limited Warranty, you must return
the complete product with proof of purchase, transportation prepaid, to any World Factory, Inc.
®
authorized
service center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS
RELATED TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO
ONE (1) YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY
FOR LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
Santa Fe Bistro Table
Instruction Manual
ASSEMBLY INSTRUCTIONS
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
Caution: Do not over tighten fasteners.
A
B
C
D
F
E
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 1Tabletop
B 4Legs
C
16
D
16
6mm x 30 Bolts
E
Small Support Ring 1
6mm Hex Nuts
Large Support Ring 1
F
Figure 1.
Figure 4.
1. (See figure 1) Place the table top (A) upside
down on a non-scratching surface.
2. (See figure 2) Insert each leg (B) into the
pastic sleeves located underneath the
tabletop (A).
3. (See figure 3) Insert the small support
ring (C) between the legs (B) near the
tabletop (A) and secure it to (1) leg (B)
with (2) 6mm x 30 bolts (E) and secure
with (2) hex nuts (F). Repeat this with
the other (3) legs.
(Do not completely tighten bolts.)
5. (See figure 4) Turn table assembly right
side up on a level surface, then tighten the
bolts (D).
4. (See figure 3) Attach the large support
ring (D) near the bottom of the legs (B),
in the same manner as Step 3.
(Do not completely tighten bolts.)
A
Figure 2.
A
B
D
E
A
E
F
C
F
B
Figure 3.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
G
1
Plastic Umbrella Cap (pre-installed)
G
  • Page 1 1
  • Page 2 2

Astonica 50105395 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI