Find your niche
VERSATILE AND MODERN
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
• Fit will be snug, you may need a rubber mallet
• You will need two people for assembly
ASSEMBLY INSTRUCTIONS
IN THE BOX:
A: Table Top (2)
B: Legs (2)
C: Stringer
D: Brackets (2)
A
C
D
B
B
CONFERENCE TABLE NCT8442
NCT6834
Find your niche
VERSATILE AND MODERN
CONFERENCE TABLE NCT8442
NCT6834
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 3
With the Table Top Pieces (A) laying face down,
line up pins
with their coordinang
holes and press together in to place.
Aach Brackets (D) to the assembled Table Top (A) by lining up
EClips with their coordinang holes pressing down in to place,
and then tapping towards the center of the table. See Figure 1
for details.
Note: Fit will be snug, you may need to tap in to place with
a rubber mallet. Use two people to ip the table over once
assembled.
Note: You may need to tap in to place with a rubber mallet.Note: You may need to tap in to place with a rubber mallet.
A
D
C
B B
D
D
A
A
A
C
STEP 2
STEP 4
Aach Stringer (C) by lining up EClips with coordinang holes
on the assembled Table Top (A), pressing down and over in to
place. See Figure 1 for details.
Figure 1
Aach both Legs(B) by lining up holes with coordinang EClips on
the sides of the Stringer (C) and lining up pins with coordinang
holes on the Table Top (A). Press downward to lock into place.
A
C
A
Figure 1
D
A
-
1
-
2
Niche NCT8442TF Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Regency LCTRT7135MH Operating instructions
-
-
-
-
Vermeiren Eclips X4 KIDS User manual
-
Deckorators 117672 Installation guide
-
-
Vermeiren Eclips+ 30° User manual
-
-