Regency HDPUDS723042GY Installation guide

Regency
Brand
Regency
Model
HDPUDS723042GY
Type
Installation guide

This manual is also suitable for

Find your niche
VERSATILE AND MODERN
NIGHTSTAND NNS2116
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
Note: Drawer and Nightstand assemble separately. Separate
Drawer pieces from nightstand pieces before starng.
featuring
IN THE BOX:
A: Nightstand Base
C: Stringer
E: Nightstand Back
G: Drawer Back
I: Drawer Front
F: Drawer
Sides (2)
H: Drawer
Base
J: Push Pins (12)
D: Nightstand Top
B: Nightstand Sides (2)
A
C
F
I
G
D
E
B
F
H
B
Find your niche
VERSATILE AND MODERN
NIGHTSTAND NNS2116
ASSEMBLY INSTRUCTIONS
STEP 1
NIGHTSTAND ASSEMBLY
Snap Nightstand Base (A) onto leNighstand
Side (B) by lining up lockdowels and pins with
their coordinang holes and pressing into
place (See gure 1.) Make sure drawer glides
are on inside and facing front. (Note: Pieces
snap together in numerical order.)
Note: Make sure the Nightstand Base (A) is
facing the correct way with holes to aach
Nightstand Back (E) facing the back
Place components upright. Snap Nightstand
Top (D) onto corresponding Nightstand Sides
(B). Make sure the Top is facing the correct
way with holes to aach Nightstand Back (E)
facing the back.
STEP 2A: Snap Stringer (C) to le Nightstand Side (B).
STEP 2B: Snap right Nightstand Side (B) to the Base (A) and Stringer (C).
Make sure Drawer glides are on inside and facing the front.
Aach Nightstand Back (E) to assembled stand using 12 Push Pins (J).
B
C
B
STEP 2A: STEP 2B:
B
A
D
B B
STEP 2
STEP 4
STEP 3
Figure 1
Front
Find your niche
VERSATILE AND MODERN
NIGHTSTAND NNS2116
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 4
STEP 3
Snap Drawer Sides (F) to Drawer Back (G). Make sure sides
with the track are facing outwards and groove is lined up
on all three sides. (Note: pieces snap together in numerical
order.)
Snap Drawer Front (I) to assembled Drawer.
Insert Drawer into Nightstand by lining up glides on both Drawer and Stand.
Slide Drawer Base (H) into grooves along Drawer Sides (F) and Drawer
Back (G).
G
F
H
F
F
G
F
I
DRAWER ASSEMBLY
  • Page 1 1
  • Page 2 2
  • Page 3 3

Regency HDPUDS723042GY Installation guide

Regency
Brand
Regency
Model
HDPUDS723042GY
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents