2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Toro
  7. Work Light Kit, RT1200 Trencher

Toro Work Light Kit, RT1200 Trencher Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Work Light Kit, RT1200 Trencher Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3378-114RevA
WorkLightKit
RT1200Trencher
ModelNo.25464
ModelNo.25464E
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Wiringharness1Routethewiringharness.
Worklight4Installtheworklights.
RoutingtheWiringHarness
1.Connectthe4-pinconnectorofthewiringharnessto
the4-socketconnectorofthemachineharnessunder
thedashboard(Figure1).
Figure1
1.4-pinconnector2.4-socketconnector
2.Movetheharnessdownandtotheleftfromunderthe
dashboard.
3.Routetheharnessalongthekick-platepanelandthe
steering-consolepanel,andsecuretheharnesswiththe
magnetictie-mountwraps(Figure2).
Figure2
1.Steering-consolepanel
3.Wiringharness
2.Magnetictie-mountwraps4.Kick-platepanel
4.RoutetheharnessalongtheinsideoftheROPS-post
tube,andsecuretheharnesswiththemagnetic
tie-mountwraps(Figure3).
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3378-114*A
Figure3
1.ROPS-posttube
3.Wiringharness
2.Magnetictie-mountwraps
5.Routethetwo2-socketconnectorsonthewiring
harnessthroughthefrontROPS-plateholes(
Figure4).
Note:Ensurethattheharnessisroutedontheinside
ofthefrontROPSplate.
Figure4
1.ROPSplate
3.Wiringharness
2.ROPS-plateholes
6.Routethetwo2-socketconnectorsonthewiring
harnessthroughtheopeningsinthefrontROPS
light-coverplate(Figure5).
Note:Toremovethecoverplates,refertoInstalling
theWorkLights.
Figure5
1.FrontROPSlight-cover
plate
2.2-socketconnectors
7.RoutethewiringharnessalongtheinsideoftheROPS
post-tube,andsecuretheharnesswiththemagnetic
tie-mountwraps(Figure6).
Figure6
1.Wiringharness
4.RearROPSplate
2.Magnetictie-mountwraps
5.ROPSpost-tube
3.OpeningintherearROPS
plate
8.Routethetwo2-socketconnectorsonthewiring
harnessthroughtheopeningintherearROPSplate
(Figure6).
9.Routethetwo2-socketconnectorsonthewiring
harnessthroughtheopeningsintherearROPS
light-coverplate(Figure7).
Note:Toremovethecoverplates,refertoInstalling
theWorkLights.
2
Figure7
1.RearROPSlight-cover
plate
2.2-socketconnectors
InstallingtheWorkLights
1.Removethe4hex-headscrewsandthe2coverplates
fromthefrontROPSlight-coverplate(Figure8).
Note:Discardthe4hex-headscrewsandthe2cover
plates.
Figure8
1.Hex-headscrew
2.Coverplate
2.Connectthe2-pinconnectorintothe2-socket
connector,andinstallthe2frontworklightsintothe
frontROPSlight-coverplate(Figure9).
Figure9
1.Worklights3.2-socketconnectors
2.FrontROPSlight-cover
plate
3.Removethe4hex-headscrewsandthe2coverplates
fromtherearROPSlight-coverplate(Figure10).
Note:Discardthe4hex-headscrewsandthe2cover
plates.
Figure10
1.Coverplate
2.Hex-headscrew
4.Connectthe2-pinconnectorintothe2-socket
connector,andinstallthe2rearworklightsintothe
rearROPSlight-coverplate(Figure11).
Figure11
1.RearROPSlight-cover
plate
3.Worklights
2.2-socketconnectors
3
Operation
OperatingtheWorkLights
Pressbuttonnumber1onthemaindisplayscreentoturnthe
worklightsonoroff(Figure12).
Figure12
WorkLightsShownintheOnPositionontheScreen
1.Buttonnumber1
Maintenance
ReplacingaWorkLightBulb
1.Turntheknobontherearofworklight
counterclockwise1/4turn,andpullthelight-bulb
assemblyout(Figure13).
Figure13
1.Light-bulbassembly
2.Insertthenewlight-bulbassemblyatthehorizontal
position,andturntheknobclockwise1/4turnbackto
theoriginal,verticalposition(Figure14).
Important:Donottouchthelightbulbduring
assembly,asthiswillshortenthelifeofthelight
bulb.
Figure14
1.Light-bulbassembly
4
/