Sika 479628, 7116210 User manual

  • Hello! I am an AI chatbot trained to assist you with the Sika 479628 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MATERIALS:
• Safety glasses and gloves • Utility knife • Cartridge of SikaBond® Hardscape Adhesive
• Standard caulk gun • Small spatula
SITE PREP & PROCEDURE
1. Make sure that all surfaces are clean, structurally sound, and dry. Remove all dirt, oil, moisture, and/
or old adhesive that may adversely affect the adhesion of the material.
2. Cut the tip of the nozzle at a 45° angle to the desired bead size, then puncture the seal inside of the
nozzle and place the cartridge into a caulking gun.
3. Wearing protective gloves and safety goggles, hold the gun at a 45° angle and squeeze the gun
handle to start the flow of adhesive. One 10.1 fl oz. cartridge will yield 24 linear feet of adhesive in a
1/4” bead.
4. Gun the adhesive onto the substrate/area to be bonded. Force adhesive onto bonding surface as a
spread, bead or for spot bonding.
5. Clean up all tools, spills, and excess material with clean rags after use. If necessary, use a paint
thinner or other approved solvent such as acetone, following the solvent manufacturer’s precautions.
HARDSCAPING • RETAINING WALLS • PAVER CAPS • MASONRY
SikaBond® Hardscape Adhesive
HOW-TO GUIDE
usa.sika.com/retail y Refer to Product Data Sheet for more information.
/