2. Article
  3. SKU19342

Article SKU19342 Assembly Instructions

  • Hello! I have reviewed the Assembly Instructions for the Article VEERE Wall Mirror. This document provides guidance on how to securely install the mirror using anti-tip restraints. I can answer questions about required tools, hardware, and the installation steps detailed in the instructions.
  • What is the required drill bit size?
    What is included in hardware package?
    What type of wall is the provided hardware designed for?
Assembly Instructions
VEERE
Wall Mirror
VERSION 1.0
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
2
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
PLUG 2
M5 × 35MM SCREW 2
ANTI-TIP RESTRAINT INSTALLATION
Page 2 of 4
MIRROR Anti-Tip Installation
WARNING!
Hardware (A/B) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2
#
#
Page 3 of 4VEERE Wall Mirror
Hang the mirror on
the screws.
!
1
2
Drill holes in wall using
8mm / 5/16" drill bit.
×2×2×2
#
Page 4 of 4VEERE Wall Mirror
3
/