2. Article
  3. SKU19340

Article SKU19340, SKU19242 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the LAUD floor mirror. This document details how to install the mirror, with a focus on safety using the provided anti-tip restraint. I'm ready to answer any questions you have about the assembly process or the included hardware.
  • What tool is required for installation?
    What type of wall is the hardware designed for?
    What is the purpose of the anti-tip restraint?
Assembly Instructions
LAUD
Floor Mirror
VERSION 1.0
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
2
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
PLUG 4
M4 × 25MM SCREW 4
BRACKET 2
QUICK LINK CABLE 2
ANTI-TIP RESTRAINT INSTALLATION
Page 2 of 4
MIRROR Anti-Tip Installation
WARNING!
Hardware (A/C) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2
#
#
Page 3 of 4LAUD Floor Mirror
Quick link cable (D)
through pre-installed
brackets (C) onto mirror.
Thread through brackets
(C) on the wall. To lock, link
cable until they snap lock.
!
1
2
× 4
Drill holes in wall using
8mm / 5/16" drill bit.
Back mirror
!
#
Page 4 of 4LAUD Floor Mirror
3
/