Page is loading ...
Assembly Instructions
HAMN
Wall Mirror
VERSION 1.0
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
2
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
ANTI-TIP RESTRAINT INSTALLATION
Page 2 of 4
MIRROR Anti-Tip Installation
WARNING!
Hardware (A/B) and (C/D) to attach to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2
PARTS INVENTORY
ID DESCRIPTION QTY
MIRROR 1
LADDER FRAME 1
MODULAR HOOK 4
SHORT PLUG 6
SHORT SCREW 6
LONG PLUG 4
LONG SCREW 4
#
Page 3 of 4HAMN Wall Mirror
#
#
Page 4 of 4HAMN Wall Mirror
If you want to hang mirror on the wall,
please drill additional holes according
to where the positioning of holes and
hardware.
!
1
2A 2B
Place markings with a pencil
to drill holes onto wall.
OPTION 1 - METAL RACK INSTALLATION OPTION 2 - WALL INSTALLATION
#
#
Page 5 of 4HAMN Wall Mirror
3A 3B
×6 ×4
44B
×4×6
OPTION 1 - METAL RACK INSTALLATION OPTION 2 - WALL INSTALLATION
OPTION 1 - METAL RACK INSTALLATION OPTION 2 - WALL INSTALLATION
#
#
Page 6 of 4HAMN Wall Mirror
5A
5B
Hang the mirror on the metal rack.
!
Hang the mirror on the wall.
!
OPTION 1
OPTION 2
×4
/
