Assembly Instructions
VEERE
Wall Mirror
VERSION 1.0
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
2
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
PARTS INVENTORY
ID DESCRIPTION QTY
PLUG 2
M5 × 35MM SCREW 2
ANTI-TIP RESTRAINT INSTALLATION
Page 2 of 4
MIRROR Anti-Tip Installation
WARNING!
Hardware (A/B) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1010 Raymur Ave.
Vancouver, BC V6A 3T2
#
#
Page 3 of 4VEERE Wall Mirror
Hang the mirror on
the screws.
!
1
2
Drill holes in wall using
8mm / 5/16" drill bit.
×2×2×2
#
Page 4 of 4VEERE Wall Mirror
3
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Groupe Brandt FC212XN1 Owner's manual
-
-
Groupe Brandt FP212XN1 Owner's manual
-
Groupe Brandt FP230XN1 Owner's manual
-
-
Groupe Brandt FP228ZN1 Owner's manual
-
-
-
Groupe Brandt AD236WN1 Owner's manual
-