2. Hytronik
  3. Spring-mount box HA03

Hytronik Spring-mount box HA03 User manual

  • Hello! I am an AI assistant that has analyzed the Installation and Instruction Manual for the HYTRONIK Spring-mount Box HA03. This document provides instructions for installing the spring-mount box both with and without a junction box, including sensor installation. I'm ready to answer any questions you have about the device and its installation based on the information provided in this manual.
  • What is the first step for mounting with a junction box?
    What is the third installation step?
    In which direction should the sensor be rotated to tighten up?
Installation and Instruction Manual
Installation
HA03
Spring-mount Box
HA03-20200925-A0
1.Fix the spring-mount
box (with junction box)
1.Fix the spring-mount
box (without junction box)
5
4
2 3
1
3.Install the sensor into
the spring-mount box
Follow the track
4.2
44
46
2.Fix cables
4.Rotate the sensor counter-clockwise
till the end to tighten up
Mechanical Structure & Dimensions
5.Finished (with junction box) 5.Finished (without junction box)
/