Monoprice 13358 Installation guide

Hello! I've reviewed the Installation Guide for the MONOPRICE Multizone Source with Bluetooth Receiver (model 13358) and its required RJ45 to RCA Converter (model 13356). This document outlines how to connect the devices, pair a Bluetooth device, and other key features. I am ready to assist you with any questions you might have about setting up or using this equipment.
How do I put the device in Bluetooth pairing mode?

How long does the keypad stay in pairing mode?

What is required for use with the 13358?

How to delete the pairing with a mobile device?

MONOPRICE Multizone Source with Bluetooth® Receiver

Installation Guide

1. Connect all equipment according to the manufacturer's instructions.

2. Press and hold the Bluetooth® button on the keypad for about 5 seconds until the blue LED starts to

flash, indicating it is in Bluetooth Pairing mode.

3. Open the settings on your mobile device, scan for Bluetooth devices, then select the MP 13358 entry.

 The blue LED will glow steadily and an audible chime will sound in the assigned speakers.

 The keypad will stay in Pairing Mode for about 180 seconds. The keypad will automatically shut

off if there is no connected device.

4. To delete the pairing with your mobile device, press and hold the Bluetooth button for about 5 seconds.

NOTE: The 13356 MonopriceMultizone RJ45 to RCA Converter is required for use with the 13358 and is not included.