Before Operation
In this operation manual, we define warnings and their classifications as follows.
[ Classifications ]
Danger To prevent injury and death.
Warnings in this classification indicate danger that may result in injury
and death if not observed.
Caution To prevent damage to the product.
Warnings in this classification indicate risks of damage to the product
and performance failure.
[ Symbols ]
symbol indicates a condition that requires caution. The subject of each caution
is illustrated inside the triangle.
(Left: caution for hot surface )
symbol indicates prohibition. Do not take a prohibited action shown inside or
near this symbol.
( Left: Do not disassemble )
This symbol indicates a mandatory action. A specific action is given near the
symbol.
Never expose the sensor to a flammable gas.
The heated sensor may explode or catch fire.
Do not disassemble or heat the batteries.
Do not throw them into fire.
The batteries may explode.
Do not use near
flammable gas
Explosive
Do not drop or hit the instrument.
It may cause damage and malfunctioning. Do not drop or hit
Do not disassemble, modify, or repair the instrument.
It may cause a short circuit and malfunction.
Do not disassemble or modify
Do not hold the instrument by its probe cable.
The instrument may be damaged.
Do not hold probe cable
Set batteries in the correct direction. Check polarity.
Setting the batteries in the wrong direction
may cause leakage and contaminate the Insert correctly
instrument.
Do not wipe the instrument with a solvent.
The body may deform or deteriorate. Use soft dry cloth to
remove stains. If stains persist, soak the cloth in a neutral
detergent and wipe the instrument with the soft cloth.
Do not use solvents such as thinner and benzine.
Do not use solvent
Keep the sensor clean.
Dust attached to the sensor may affect accuracy.
Keep clean
/
